Man/vzctl.8

NAME

vzctl − utility to control an OpenVZ container.

SYNOPSIS

vzctl [flags] create CTID [--ostemplate name] [--config name] [--private path] [--root path] [--ipadd addr] [--hostname name]

vzctl [flags] set CTID parameters [--save]

vzctl [flags] destroy | mount | umount | start | stop | restart | status | quotaon | quotaoff | quotainit CTID

vzctl [flags] exec | exec2 CTID command [arg ...]

vzctl [flags] enter CTID [--exec command [arg ...]]

vzctl [flags] runscript CTID script

vzctl --help | --version

DESCRIPTION

Utility vzctl runs on the host system (otherwise known as Hardware Node, or HN) and performs direct manipulations with containers (CTs).

Containers can be referred to by either numeric CTID or by name (see --name option). Note that CT ID <= 100 are reserved for OpenVZ internal purposes.

OPTIONS

Flags

These flags come before a command, and can be used with any command. They affect logging to console (terminal) only, and do not affect logging to a log file.

--quiet

Disables output. Note that scripts run by vzctl are still able to produce some output.

--verbose

Increments logging level up from the default. Can be used multiple times. Default value is set to the value of VERBOSE parameter in the global configuration file vz.conf(5), or to 0 if not set by VERBOSE parameter.

Setting container parameters

set CTID parameters [--save] [--force]

This command sets various container parameters. If a --save flag is given, parameters are saved in container configuration file ctid.conf(5). Use --force to save the parameters even if the current kernel doesn’t support OpenVZ. If the container is currently running, vzctl applies these parameters to the container.

The following parameters can be used with set command.

Miscellaneous

--onboot yes|no

Sets whether the container will be started during system boot. The container will not be auto-started unless this parameter is set to yes.

--bootorder number

Sets the boot order priority for this CT. The higher the number is, the earlier in the boot process this container starts. By default this parameter is unset, which is considered to be the lowest priority, so containers with unset bootorder will start last.

--root path

Sets the path to root directory for this container. This is essentially a mount point for container’s root directory. Argument can contain literal string $VEID, which will be substituted with the numeric CT ID. Changing this parameter is not recommended, better edit vz.conf(5) global configuration file.

--userpasswd user:password

Sets password for the given user in a container, creating the user if it does not exists. Note that this option is not saved in configuration file at all (so --save flag is useless), it is applied to the container (by modifying its /etc/passwd and /etc/shadow files).

In case container root filesystem is not mounted, it is automatically mounted, then all the appropriate file changes are applied, then it is unmounted.

Note that container should be created before using this option.

--disabled yes|no

Disable container start. To force the start of a disabled container, use vzctl start --force.

--name name

Add a name for a container. The name can later be used in subsequent calls to vzctl in place of CTID.

--description string

Add a textual description for a container.

--setmode restart|ignore

Whether to restart a container after applying parameters that require the container to be restarted in order to take effect.

Networking

--ipadd addr

Adds IP address to a given container. Note that this option is incremental, so addr are added to already existing ones.

--ipdel addr | all

Removes IP address addr from a container. If you want to remove all the addresses, use --ipdel all.

--hostname name

Sets container hostname. vzctl writes it to the appropriate file inside a container (distribution-dependent).

--nameserver addr

Sets DNS server IP address for a container. If you want to set several nameservers, you should do it at once, so use --nameserver option multiple times in one call to vzctl, as all the name server values set in previous calls to vzctl are overwritten.

--searchdomain name

Sets DNS search domains for a container. If you want to set several search domains, you should do it at once, so use --searchdomain option multiple times in one call to vzctl, as all the search domain values set in previous calls to vzctl are overwritten.

--netif_add ifname[,mac,host_ifname,host_mac,bridge]

Adds a virtual Ethernet device (veth) to a given container. Here ifname is the Ethernet device name in the container, mac is its MAC address, host_ifname is the Ethernet device name on the host, and host_mac is its MAC address. MAC addresses should be in the format like XX:XX:XX:XX:XX:XX. bridge is an optional parameter which can be used in custom network start scripts to automatically add the interface to a bridge. All parameters except ifname are optional and are automatically generated if not specified.

--netif_del dev_name | all

Removes virtual Ethernet device from a container. If you want to remove all devices, use all.

Veth interface configuration

The following options can be used to reconfigure the already-created virtual Ethernet interface. To select the interface to configure, use --ifname name option.
--mac XX:XX:XX:XX:XX:XX

MAC address of interface inside a container.

--host_ifname name

interface name for virtual interface in the host system.

--host_mac XX:XX:XX:XX:XX:XX

MAC address of interface in the host system.

--bridge name

Bridge name. Custom network start scripts can use this value to automatically add the interface to a bridge.

--mac_filter on|off

Enables/disables MAC address filtering for the Container veth device and the possibility of configuring the MAC address of this device from inside the Container. If the filtering is turned on:
• the veth device accepts only those packets that have a MAC address in their headers corresponding to that of this device (excluding all broadcast and multicast packets);
• it is impossible to modify the veth MAC address from inside the Container.

By default, this functionality is enabled for all veth devices existing inside the Container.

Resource limits

The following options sets barrier and limit for various user beancounters. Each option requires one or two arguments. In case of one argument, vzctl sets barrier and limit to the same value. In case of two colon-separated arguments, the first is a barrier, and the second is a limit. Each argument is either a number, a number with a suffix, or a special value unlimited.

Arguments are in items, pages or bytes. Note that page size is architecture-specific, it is 4096 bytes on IA32 platform.

You can also specify different suffixes for set parameters (except for the parameters which names start with num). For example, vzctl set CTID --privvmpages 5M:6M should set privvmpages’ barrier to 5 megabytes and its limit to 6 megabytes.

Available suffixes are:
g, G -- gigabytes.
m, M -- megabytes.
k, K -- kilobytes.
p, P -- pages (page is 4096 bytes on x86 architecture, other architectures may differ).

You can also specify the literal word unlimited in place of a number. In that case the corresponding value will be set to LONG_MAX, i. e. the maximum possible value.

--numproc items[:items]

Maximum number of processes and kernel-level threads. Setting the barrier and the limit to different values does not make practical sense.

--numtcpsock items[:items]

Maximum number of TCP sockets. This parameter limits the number of TCP connections and, thus, the number of clients the server application can handle in parallel. Setting the barrier and the limit to different values does not make practical sense.

--numothersock items[:items]

Maximum number of non-TCP sockets (local sockets, UDP and other types of sockets). Setting the barrier and the limit to different values does not make practical sense.

--vmguarpages pages[:pages]

Memory allocation guarantee. This parameter controls how much memory is available to a container. The barrier is the amount of memory that container’s applications are guaranteed to be able to allocate. The meaning of the limit is currently unspecified; it should be set to unlimited.

--kmemsize bytes[:bytes]

Maximum amount of kernel memory used. This parameter is related to --numproc. Each process consumes certain amount of kernel memory - 16 KB at least, 30-50 KB typically. Very large processes may consume a bit more. It is important to have a certain safety gap between the barrier and the limit of this parameter: equal barrier and limit may lead to the situation where the kernel will need to kill container’s applications to keep the kmemsize usage under the limit.

--tcpsndbuf bytes[:bytes]

Maximum size of TCP send buffers. Barrier should be not less than 64 KB, and difference between barrier and limit should be equal to or more than value of numtcpsock multiplied by 2.5 KB.

--tcprcvbuf bytes[:bytes]

Maximum size of TCP receive buffers. Barrier should be not less than 64 KB, and difference between barrier and limit should be equal to or more than value of numtcpsock multiplied by 2.5 KB.

--othersockbuf bytes[:bytes]

Maximum size of other (non-TCP) socket send buffers. If container’s processes needs to send very large datagrams, the barrier should be set accordingly. Increased limit is necessary for high performance of communications through local (UNIX-domain) sockets.

--dgramrcvbuf bytes[:bytes]

Maximum size of other (non-TCP) socket receive buffers. If container’s processes needs to receive very large datagrams, the barrier should be set accordingly. The difference between the barrier and the limit is not needed.

--oomguarpages pages[:pages]

Guarantees against OOM kill. Under this beancounter the kernel accounts the total amount of memory and swap space used by the container’s processes. The barrier of this parameter is the out-of-memory guarantee. If the oomguarpages usage is below the barrier, processes of this container are guaranteed not to be killed in out-of-memory situations. The meaning of limit is currently unspecified; it should be set to unlimited.

--lockedpages pages[:pages]

Maximum number of pages acquired by mlock(2).

--privvmpages pages[:pages]

Allows controlling the amount of memory allocated by the applications. For shared (mapped as MAP_SHARED) pages, each container really using a memory page is charged for the fraction of the page (depending on the number of others using it). For "potentially private" pages (mapped as MAP_PRIVATE), container is charged either for a fraction of the size or for the full size if the allocated address space. In the latter case, the physical pages associated with the allocated address space may be in memory, in swap or not physically allocated yet.

The barrier and the limit of this parameter control the upper boundary of the total size of allocated memory. Note that this upper boundary does not guarantee that container will be able to allocate that much memory. The primary mechanism to control memory allocation is the --vmguarpages guarantee.

--shmpages pages[:pages]

Maximum IPC SHM segment size. Setting the barrier and the limit to different values does not make practical sense.

--numfile items[:items]

Maximum number of open files. In most cases the barrier and the limit should be set to the same value. Setting the barrier to 0 effectively disables pre-charging optimization for this beancounter in the kernel, which leads to the held value being precise but could slightly degrade file open performance.

--numflock items[:items]

Maximum number of file locks. Safety gap should be between barrier and limit.

--numpty items[:items]

Number of pseudo-terminals (PTY). Note that in OpenVZ each container can have not more than 255 PTYs. Setting the barrier and the limit to different values does not make practical sense.

--numsiginfo items[:items]

Number of siginfo structures. Setting the barrier and the limit to different values does not make practical sense.

--dcachesize bytes[:bytes]

Maximum size of filesystem-related caches, such as directory entry and inode caches. Exists as a separate parameter to impose a limit causing file operations to sense memory shortage and return an errno to applications, protecting from memory shortages during critical operations that should not fail. Safety gap should be between barrier and limit.

--numiptent num[:num]

Number of iptables (netfilter) entries. Setting the barrier and the limit to different values does not make practical sense.

--physpages pages[:pages]

This is currently an accounting-only parameter. It shows the usage of RAM by this container. Barrier should be set to 0, and limit should be set to unlimited.

--swappages pages[:pages]

The limit, if set, is used to show a total amount of swap space available inside the container. The barrier of this parameter is currently ignored. The default value is unlimited, meaning total swap will be reported as 0.

Note that in order for the value to be shown as total swap space, --meminfo parameter should be set to value other than none.

CPU fair scheduler parameters

These parameters control CPU usage by container.

--cpuunits num

CPU weight for a container. Argument is positive non-zero number, passed to and used in the kernel fair scheduler. The larger the number is, the more CPU time this container gets. Maximum value is 500000, minimal is 8. Number is relative to weights of all the other running containers. If cpuunits are not specified, default value of 1000 is used.

You can set CPU weight for CT0 (host system itself) as well (use vzctl set 0 --cpuunits num). Usually, OpenVZ initscript (/etc/init.d/vz) takes care of setting this.

--cpulimit num[%]

Limit of CPU usage for the container, in per cent. Note if the computer has 2 CPUs, it has total of 200% CPU time. Default CPU limit is 0 (no CPU limit).

--cpus num

sets number of CPUs available in the container.

--cpumask cpus | all

sets list of allowed CPUs for the container. Input format is a comma-separated list of decimal numbers and ranges. Consecutively set bits are shown as two hyphen-separated decimal numbers, the smallest and largest bit numbers set in the range. For example, if you want the container to execute on CPUs 0, 1, 2, 7, you should pass 0-2,7. Default value is all (the container can execute on any CPU).

Memory output parameters

This parameter control output of /proc/meminfo inside a container.

--meminfo none

No /proc/meminfo virtualization (the same as on host system).

--meminfo mode:value

Configure total memory output in a container. Reported free memory is evaluated accordingly to the mode being set. Reported swap is evaluated according to the settings of --swappages parameter.

You can use the following modes for mode:
• pages:value - sets total memory in pages;
• privvmpages:value - sets total memory as privvmpages * value.

Default is privvmpages:1.

iptables control parameters

--iptables name

Allow to use the functionality of name iptables module inside the container. To specify multiple names, repeat --iptables for each, or use space-separated list as an argument (enclosed in single or double quotes to protect spaces).

The default list of enabled iptables modules is specified by the IPTABLES variable in vz.conf(5).

You can use the following values for name: iptable_filter, iptable_mangle, ipt_limit, ipt_multiport, ipt_tos, ipt_TOS, ipt_REJECT, ipt_TCPMSS, ipt_tcpmss, ipt_ttl, ipt_LOG, ipt_length, ip_conntrack, ip_conntrack_ftp, ip_conntrack_irc, ipt_conntrack, ipt_state, ipt_helper, iptable_nat, ip_nat_ftp, ip_nat_irc, ipt_REDIRECT, xt_mac, ipt_recent, ipt_owner.

Network devices control parameters

--netdev_add name

move network device from the host system to a specified container

--netdev_del name

delete network device from a specified container

Disk quota parameters
--diskquota yes|no

allows to enable or disable disk quota for a container. By default, a global value (DISK_QUOTA) from vz.conf(5) is used.

--diskspace num[:num]

sets soft and hard disk quota limits, in blocks. First parameter is soft limit, second is hard limit. One block is currently equal to 1Kb. Suffixes G, M, K can also be specified (see Resource limits section for more info on suffixes).

--diskinodes num[:num]

sets soft and hard disk quota limits, in i-nodes. First parameter is soft limit, second is hard limit.

--quotatime seconds

sets quota grace period. Container is permitted to exceed its soft limits for the grace period, but once it has expired, the soft limit is enforced as a hard limit.

--quotaugidlimit num

sets maximum number of user/group IDs in a container for which disk quota inside the container will be accounted. If this value is set to 0, user and group quotas inside the container will not be accounted.

Note that if you have previously set value of this parameter to 0, changing it while the container is running will not take effect.

Mount option

--noatime yes | no

Sets noatime flag (do not update inode access times) on filesystem.

Capability option

--capability capname:on|off

Sets a capability for a container. Note that setting capability when the container is running does not take immediate effect; restart the container in order for the changes to take effect. Note a container has default set of capabilities, thus any operation on capabilities is "logical and" with the default capability mask.

You can use the following values for capname: chown, dac_override, dac_read_search, fowner, fsetid, kill, setgid, setuid, setpcap, linux_immutable, net_bind_service, net_broadcast, net_admin, net_raw, ipc_lock, ipc_owner, sys_module, sys_rawio, sys_chroot, sys_ptrace, sys_pacct, sys_admin, sys_boot, sys_nice, sys_resource, sys_time, sys_tty_config, mknod, lease, setveid, ve_admin. For detailed description, see capabilities(7).

WARNING: setting some of those capabilities may have far reaching security implications, so do not do it unless you know what you are doing. Also note that setting setpcap:on for a container will most probably lead to inability to start it.

Device access management

--devnodes device:[r][w][q]|none

Give the container an access (r - read, w - write, q - disk quota management, none - no access) to a device designated by the special file /dev/device. Device file is created in a container by vzctl. Example: vzctl set 777 --devnodes sdb:rwq.

--devices b|c:major:minor|all:[r][w][q]|none

Give the container an access to a block or character device designated by its major and minor numbers. Device file have to be created manually.

PCI device management

--pci_add [domain:]bus:slot.func

Give the container an access to a specified PCI device. All numbers are hexadecimal (as printed by lspci(8) in the first column).

--pci_del [domain:]bus:slot.func

Delete a PCI device from the container.

Note that vps-pci configuration script is executed by vzctl then configuring PCI devices. The script is usually located at /usr/lib[64]/vzctl/scripts/.

Features management

--features name:on|off

Enable or disable a specific container feature. Known features are: sysfs, nfs, sit, ipip, ppp, ipgre, bridge, nfsd.

Apply config

--applyconfig name

Read container parameters from the container sample configuration file /etc/vz/conf/ve-name.conf-sample, and apply them, if --save option specified save to the container config file. The following parameters are not changed: HOSTNAME, IP_ADDRESS, OSTEMPLATE, VE_ROOT, and VE_PRIVATE.

--applyconfig_map group

Apply container config parameters selected by group. Now the only possible value for group is name: to restore container name based on NAME variable in container configuration file.

I/O priority management

--ioprio priority

Assigns I/O priority to container. Priority range is 0-7. The greater priority is, the more time for I/O activity container has. By default each container has priority of 4.

Checkpointing and restore

Checkpointing is a feature of OpenVZ kernel which allows to save a complete state of a running container, and to restore it later.

chkpnt CTID [--dumpfile name]

This command saves a complete state of a running container to a dump file, and stops the container. If an option --dumpfile is not set, default dump file name /vz/dump/Dump.CTID is used.

restore CTID [--dumpfile name]

This command restores a container from the dump file created by the chkpnt command.

Performing container actions

create CTID [--ostemplate name] [--config name] [--private path]
[--root path] [--ipadd addr] [--hostname name]

Creates a new container area. This operation should be done once, before the first start of the container.

If the --config option is specified, values from example configuration file /etc/vz/conf/ve-name.conf-sample are put into the container configuration file. If this container configuration file already exists, it will be removed.

You can use --root path option to sets the path to the mount point for the container root directory (default is VE_ROOT specified in vz.conf(5) file). Argument can contain literal string $VEID, which will be substituted with the numeric CT ID.

You can use --private path option to set the path to directory in which all the files and directories specific to this very container are stored (default is VE_PRIVATE specified in vz.conf(5) file). Argument can contain literal string $VEID, which will be substituted with the numeric CT ID.

You can use --ipadd addr option to assign an IP address to a container. Note that this option can be used multiple times.

You can use --hostname name option to set a host name for a container.

destroy | delete

Removes a container private area by deleting all files, directories and the configuration file of this container.

start [--wait] [--force]

Mounts (if necessary) and starts a container. Unless --wait option is specified, vzctl will return immediately; otherwise an attempt to wait till the default runlevel is reached will be made by vzctl.

Specify --force if you want to start a container which is disabled (see --disabled).

Note that this command can lead to execution of premount, mount and start action scripts (see ACTION SCRIPTS below).

stop [--fast]

Stops and unmounts a container. Normally, halt(8) is executed inside a container; option --fast makes vzctl use reboot(2) syscall instead which is faster but can lead to unclean container shutdown.

Note that this command can lead to execution of stop, umount and postumount action scripts (see ACTION SCRIPTS below).

restart

Restarts a container, i.e. stops it if it is running, and starts again. Accepts all the start and stop options.

Note that this command can lead to execution of some action scripts (see ACTION SCRIPTS below).

status

Shows a container status. This is a line with five or six words, separated by spaces.

First word is literally CTID.

Second word is the numeric CT ID.

Third word is showing whether this container exists or not, it can be either exist or deleted.

Fourth word is showing the status of the container filesystem, it can be either mounted or unmounted.

Fifth word shows if the container is running, it can be either running or down.

Sixth word, if exists, is suspended. It appears if both a container and its dump file exist (see chkpnt).

This command can also be usable from scripts.

mount

Mounts container private area. Note that this command can lead to execution of premount and mount action scripts (see ACTION SCRIPTS below).

umount

Unmounts container private area. Note that this command can lead to execution of umount and postumount action scripts (see ACTION SCRIPTS below).

Note that stop does umount automatically.

quotaon ctid

Turn disk quota on. Not that mount and start does that automatically.

quotaoff ctid

Turn disk quota off. Not that umount and stop does that automatically.

quotainit ctid

Initialize disk quota (i.e. run vzquota init) with the parameters taken from the CT configuration file ctid.conf(5).

exec CTID command

Executes command in a container. Environment variables are not set inside the container. Signal handlers may differ from default settings. If command is -, commands are read from stdin.

exec2 CTID command

The same as exec, but return code is that of command.

runscript CTID script

Run specified shell script in the container. Argument script is a file on the host system which contents is read by vzctl and executed in the context of the container. For a running container, the command jumps into the container and executes the script. For a stopped container, it enters the container, mounts container’s root filesystem, executes the script, and unmounts CT root. In the latter case, the container is not really started, no file systems other than root (such as /proc) are mounted, no startup scripts are executed etc. Thus the environment in which the script is running is far from normal and is only usable for very basic operations.

enter [--exec command [arg ...]]

Enters into a container (giving a container’s root shell). This option is a back-door for host root only. The proper way to have CT root shell is to use ssh(1).

Option --exec is used to run command with arguments after entering into container. This is useful if command to be run requires a terminal (so vzctl exec can not be used) and for some reason you can not use ssh(1).

You need to log out manually from the shell to finish session (even if you specified --exec).

Other options

--help

Prints help message with a brief list of possible options.

--version

Prints vzctl version.

ACTION SCRIPTS

vzctl has an ability to execute user-defined scripts when a specific vzctl command is run for a container. The following vzctl commands can trigger execution of action scripts: start, stop, restart, mount and umount.

Action scripts are located in the /etc/vz/conf/ directory. There are global and per-CT scripts. Global scripts have a literal prefix of vps. and are executed for all containers. Per-CT scripts have a CTID numeric prefix and are executed for the given container only.

There are 8 action scripts currently defined:
vps.premount, CTID.premount

Global and per-CT mount scripts which are executed for a container before it is mounted. Scripts are executed in the host OS context, while a CT is not yet mounted or running. Global script, if exists, is executed first.

vps.mount, CTID.mount

Global and per-CT mount scripts which are executed for a container right after it is mounted. Otherwise they are the same as .premount scripts.

CTID.start

Right after vzctl has started a container, it executes this script in a container context.

CTID.stop

Right before vzctl has stopped a container, it executes this script in a container context.

vps.umount, CTID.umount

Global and per-CT umount scripts which are executed for a container before it is unmounted. Scripts are executed in the host OS context, while a CT is mounted. Global script, if exists, is executed first.

vps.postumount, CTID.postumount

Global and per-CT umount scripts which are executed for a container right after it is unmounted. Otherwise they are the same as .umount scripts.

The environment passed to all the *mount scripts is the standard environment of the parent (i.e. vzctl) with two additional variables: $VEID and $VE_CONFFILE. The first one holds the ID of the container, and the second one holds the full path to the container configuration file. If the script needs to get other CT configuration parameters, such as $VE_ROOT, it needs to get those from global and per-CT configuration files.

Here is an example of a mount script, which makes host system’s /mnt/disk available to container(s). Script name can either be /etc/vz/conf/vps.mount or /etc/vz/conf/CTID.mount.

 # If one of these files does not exist then something
 # is really broken
 [ -f /etc/sysconfig/vz ] || exit 1
 [ -f $VE_CONFFILE ] || exit 1
 # Source both files. Note the order is important.
 . /etc/vz/vz.conf
 . $VE_CONFFILE
 mount -n --bind /mnt/disk $VE_ROOT/mnt/disk

EXIT STATUS

Returns 0 upon success, or an appropriate error code in case of an error:

	1		Failed to set a UBC parameter
	2		Failed to set a fair scheduler parameter
	3		Generic system error
	5		The running kernel is not an OpenVZ kernel (or some OpenVZ modules are not loaded)
	6		Not enough system resources
	7		ENV_CREATE ioctl failed
	8		Command executed by vzctl exec returned non-zero exit code
	9		Container is locked by another vzctl invocation
	10		Global OpenVZ configuration file vz.conf(5) not found
	11		A vzctl helper script file not found
	12		Permission denied
	13		Capability setting failed
	14		Container configuration file ctid.conf(5) not found
	15		Timeout on vzctl exec
	16		Error during vzctl chkpnt
	17		Error during vzctl restore
	18		Error from setluid() syscall
	20		Invalid command line parameter
	21		Invalid value for command line parameter
	22		Container root directory (VE_ROOT) not set
	23		Container private directory (VE_PRIVATE) not set
	24		Container template directory (TEMPLATE) not set
	28		Not all required UBC parameters are set, unable to start container
	29		OS template is not specified, unable to create container
	31		Container not running
	32		Container already running
	33		Unable to stop container
	34		Unable to add IP address to container
	40		Container not mounted
	41		Container already mounted
	43		Container private area not found
	44		Container private area already exists
	46		Not enough disk space
	47		Bad/broken container (/sbin/init or /bin/sh not found)
	48		Unable to create a new container private area
	49		Unable to create a new container root area
	50		Unable to mount container
	51		Unable to unmount container
	52		Unable to delete a container
	53		Container private area not exist
	60		vzquota on failed
	61		vzquota init failed
	62		vzquota setlimit failed
	63		Parameter DISKSPACE not set
	64		Parameter DISKINODES not set
	66		vzquota off failed
	67		ugid quota not initialized
	71		Incorrect IP address format
	74		Error changing password
	78		IP address already in use
	79		Container action script returned an error
	82		Config file copying error
	86		Error setting devices (--devices or --devnodes)
	89		IP address not available
	91		OS template not found
	100		Unable to find container IP address
	104		VE_NETDEV ioctl error
	105		Container start disabled
	106		Unable to set iptables on a running container
	107		Distribution-specific configuration file not found
	109		Unable to apply a config
	129		Unable to set meminfo parameter
	130		Error setting veth interface
	131		Error setting container name
	133		Waiting for container start failed
	139		Error saving container configuration file
	148		Error setting container IO parameters (ioprio)

EXAMPLES

To create and start "basic" container with ID of 1000 using fedora-core-5 OS template and IP address of 192.168.10.200:
vzctl create 1000 --ostemplate fedora-core-5 --config basic
vzctl set 1000 --ipadd 192.168.10.200 --save
vzctl start 1000

To set number of processes barrier/limit to 80/100, and PTY barrier/limit to 16/20 PTYs:
vzctl set 1000 --numproc 80:100 -t 16:20 --save

To execute command ls -la in this container:
vzctl exec 1000 /bin/ls -la

To execute command pipe ls -l / | sort in this container:
vzctl exec 1000 ’ls -l / | sort’

To enter this container and execute command apt-get install vim:
vzctl enter 1000 --exec apt-get install vim

Note that in the above example you will need to log out from the container’s shell after apt-get finishes.

To enter this container, execute command apt-get install vim and logout after successful installation (or stay inside the container if installation process failed) use &&:
vzctl enter 1000 --exec "apt-get install vim && logout"

To enter this container, execute command apt-get install vim and logout independently of exit code of installation process use ;:
vzctl enter 1000 --exec "apt-get install vim ; logout"

Note that you need to quote the command if you use && or ;.

To stop this container:
vzctl stop 1000

To permanently remove this container:
vzctl destroy 1000

FILES

/etc/vz/vz.conf
/etc/vz/conf/CTID.conf
/etc/vz/conf/vps.{premount,mount,umount,postumount}
/etc/vz/conf/CTID.{premount,mount,start,stop,umount,postumount}
/proc/vz/veinfo
/proc/vz/vzquota
/proc/user_beancounters
/proc/bc/*
/proc/fairsched

SEE ALSO

vz.conf(5), ctid.conf(5), arpsend(8), vzcalc(8), vzcfgvalidate(8), vzcpucheck(8), vzifup-post(8), vzlist(8), vzmemcheck(8), vzmigrate(8), vzpid(8), vzquota(8), vzsplit(8), UBC.

LICENSE

Copyright (C) 2000-2011, Parallels, Inc. Licensed under GNU GPL.