Open main menu

OpenVZ Virtuozzo Containers Wiki β

Changes

Ubuntu Gutsy template creation

4,890 bytes added, 08:24, 22 July 2012
Modify the installation
[[Category: HOWTO]]
[[Category: Templates]]
[[Category: Ubuntu]]
This article summarizes the experience of creating Ubunty Gutsy Gibbon (a.k.a. 7.10) template for OpenVZ.
=== debootstrap ===
You have to have a <code>debootstrap </code> working for Gutsy, i.e. you should have* <code>debootstrap </code> and its dependencies* <code>/usr/lib/debootstrap/scripts/gutsy </code> file
The simplest way to have it all is to work on an Ubunty Ubuntu Gutsy system (be it on a real machine or inside a VEcontainer). If you don't have <code>debootstrap </code> installed, this is the command to install it:
# apt-get install debootstrap
 
On a Gentoo Linux, <code>debootstrap</code> is also available, this is how you can install it:
 
# emerge \>=debootstrap-1.0.0
 
Note you need at least version 1.0.0, since earlier versions do not have Ubuntu scripts. So, possible you will first need to add it to package.keywords, like this:
 
# echo dev-util/debootstrap >> /etc/portage.package.keywords
 
On a Fedora system (at least Fedora 8, not sure about earlier versions):
 
# yum install debootstrap
=== vzctl ===
You need vzctl-3.0.19 22 or later to work with Ubuntu Gutsy Gibbon. If vzctl-3.0.18 or earlier is used, you will not be able to run your VEUbuntu Gutsy container. See {{bug|662}} for details. Note: Older versions of vzctl are working if you install <code>sysvinit</code> (which will remove <code>upstart</code>). The only problem I had was the network did not start, so I added "/etc/init.d/networking restart" to /etc/re.local.
== Creating template ==
=== Running debootstrap ===
Create some a working directory:
[HW]# mkdir gutsy-chroot
Run debootstrap to install a minimal Ubunty Gutsy system into that directory:
[HW]# debootstrap [--arch ''ARCH'' ] gutsy gutsy-chroot
Substitute your architecture instead If ARCH of CT0 is equal to container, you can skip the --arch option, but if you need to build an OS template for another ''ARCH''. For example, specify it explicitly:* for AMD64/x86_64, use <code>amd64</code> or * for ia64IA64, use <code>ia64</code>. For * for i386 <code>i386 you do not have to give this option.</code>
=== Preparing/starting a VE container ===
Now then you have an installation created by <code>debootstrap</code>, you can run it as a VEcontainer. In the example below VE CT ID of 777 is used; of course you can use any other non-allocated ID.
==== Moving installation to VE private area ===={{Note|an alternative way is using chroot instead of running a container. This is not recommended because of security concerns.}}
You should move the contents of gutsy-chroot directory into new VE ==== Moving installation to container private area, like this:====
# mkdir /vz/private/777 # mv You should move the contents of gutsy-chroot/ /vz/directory into new container private/777area, like this:
# mv gutsy-chroot /vz/private/777 ==== Setting VE container config ====An initial config for the [[VEcontainer]] is needed:
# vzctl set 777 --applyconfig vps.basic --save
==== Setting VE container OSTEMPLATE ====Also, we need <ttcode>OSTEMPLATE</ttcode> to be set in VE container configuration file, for the [[vzctl]] to work properly.
# echo "OSTEMPLATE=ubuntu-7.10" >> /etc/vz/conf/777.conf
==== Setting VE container IP address ====For the [[VEcontainer]] to be able to download updates from the Internet, we need a valid IP address for it:
# vzctl set 777 --ipadd x.x.x.x --save
{{Note|if you use private IP for the VEcontainer, you have to set up NAT as described in [[Using NAT for VE container with private IPs]].}}
==== Setting DNS server for VE the container ====For the [[VEcontainer]] to be able to download updates from the Internet, we also need to specify a DNS for it:
# vzctl set 777 --nameserver x.x.x.x --save
Instead of <code>x.x.x.x</code>, specify the same IP that you have in your <code>/etc/resolv.conf</code>.
==== Starting VE container ====Now start the VEcontainer:
# vzctl start 777
=== Modify the installation ===
You have to do some things in order to modify the installation to better suit the environment it will be run in (i.e. a VEcontainer).
First, enter a VEcontainer:
# vzctl enter 777
{{Warning|Do not run the commands below on the hardware node, they are only to be run within the VEcontainer!}} 
==== Remove unneeded packages ====
Some packages does not make sense in a VEcontainer, or are really optional. Remove those:
[VEcontainer]# dpkg -P ubuntu-minimal wpasupplicant wireless-tools \
udev pcmciautils initramfs-tools volumeid console-setup \
xkb-data usbutils mii-diag alsa-base alsa-utils ethtool \
module-init-tools linux-sound-base console-tools \
console-terminus busybox-initramfs libvolume-id0\ ntpdate eject libasound2 pciutils tasksel tasksel-data \ laptop-detect {{Note|On removing the deb-package "module-init-tools", a fake-modprobe is needed for IPv6 addresses, see below!}}
Note that the above list of packages may be too extensive. Say, if you want to use <code>tasksel</code> tool, do not remove it — but then you have to let laptop-detect stay.
Clean up after udev:
[VEcontainer]# rm -fr /lib/udev
==== Disable getty ====
On a usual Linux system, <code>getty </code> is running on a virtual terminals, which a VE container does not have.So, having <code>getty</code> running doesn't make sense; more to say, it complains it can not open terminal device and this clutters the logs. So, first of all we stop all <code>getty</code> processes:  [container]# initctl stop tty{1,2,3,4,5,6}
There are Next, we disable running <code>getty</code>. This can be done in two ways to disable it:
First way:
[VEcontainer]# rm /etc/event.d/tty* 
Second way:
[VEcontainer]# dpkg -P system-services
Second way can be dangerous for future versions of <code>system-services</code>, but it's OK for now since the only service they carry is running gettys<code>getty</code>s.
==== Set sane permissions for /root directory ====
[VEcontainer]# chmod 700 /root
==== Disable root login ====
[VEcontainer]# usermod -L root ==== "fake-modprobe" needed for IPv6 addresses ====  [container]# ln -s /bin/true /sbin/modprobe <small>On setup IPv6, the command "modprobe -Q IPv6" is called, which fails without the "fake-modprobe"</small>
==== Get new security updates ====
[VEcontainer]# apt-get update && apt-get upgrade
<small>This didn't show anything for me, but might do something in the future.</small>
==== Install some more packages ====
[VEcontainer]# apt-get install ssh quota
Feel free to add packages which you want to have in a default template to this command.
==== Fix SSH host keys ====
This is only useful if you installed SSH above. Each individual [[VEcontainer]] should have its own pair of SSH host keys. The code below will wipe out the existing SSH keys and instruct the newly-created [[VEcontainer]] to create new SSH keys on first boot.
<!-- please DO NOT remove <pre>...</pre> pair of tags below,
chmod a+x /etc/rc2.d/S15ssh_gen_host_keys
</pre>
 
==== Disable <code>sync()</code> for syslog ====
<!-- DO NOT remove <pre> here, it's useful -->
<pre>[VEcontainer]# sed -i -e 's@\([[:space:]]\)\(/var/log/\)@\1-\2@' /etc/syslog.conf</pre>
==== Fix <code>/etc/mtab</code> ====
Link <code>/etc/mtab</code> to <code>/proc/mounts</code>, so <code>df</code> and friends will work:
[VEcontainer]# rm -f /etc/mtab [VEcontainer]# ln -s /proc/mounts /etc/mtab
After that, it would make sense to disable <code>mtab.sh</code> script which messes with <code>/etc/mtab</code>:
[VEcontainer]# update-rc.d -f mtab.sh remove ==== Disable some services ==== In most of the cases you don't want klogd to run -- the only exception is if you configure iptables to log some events -- so you can disable it:  [container]# update-rc.d -f klogd remove
==== Get rid of tmpfs mounts Hostname ====Set proper hostname: [container]# echo "localhost" > /etc/hostname
[VE]# sed -ie '/tmpfs/d' ==== Set /etc/init.d/mountkernfs.shhosts ====
[container]# echo "127.0.0.1 localhost.localdomain localhost" > /etc/hosts ==== Disable some services Add ptys to /dev ==== This is needed in case /dev/pts will not me mounted after container start. In case /dev/ttyp* and /dev/ptyp* files are present, and LEGACY_PTYS support is enabled in the kernel, vzctl will still be able to enter container.  [container]# cd /dev && /sbin/MAKEDEV ptyp
In most of the cases you don't want klogd to run -- the only exception is if you configure iptables to log some events -- so you can disable it:==== Remove nameserver(s) ====
Remove DNS entries: [VEcontainer]# update-rc> /etc/resolv.d -f klogd removeconf
==== Clean packages ====
After installing packages, you'll have some junk packages laying around in your cache. Since you don't want your template to have those, this command will wipe them out.
[VEcontainer]# apt-get clean ==== Cleaning up log files ====  [container]# cd /var/log [container]# > messages; > auth.log; > kern.log; > bootstrap.log [container]# > dpkg.log; > syslog; > daemon.log; > apt/term.log [container]# rm -f *.0 *.1 ==== Anything else? ==== Think of what else could be done to better suit your needs. ==== Exit from the container ====
Now everything is done. Exit from the template and go back to the hardware node.
[VE]# exit
[container]# exit
 
== Preparing for and packing template cache ==
 
The following commands are to be run in the host system (i.e. not inside a container).
 
We don't need an IP for the container anymore, and we definitely do not need it in template cache, so remove it:
[HW]# vzctl set 777 --ipdel all --save
 
Stop the container:
[HW]# vzctl stop 777
 
Change dir to the container private:
[HW]# cd /vz/private/777
 
Now create a cached OS tarball. In the command below, you'll want to replace <arch> with your architecture (i386, amd64, ia64, etc). '''Note the space and the dot at the end of the command'''.
[HW]# tar --numeric-owner -czf /vz/template/cache/ubuntu-7.10-<arch>-minimal.tar.gz .
 
Look at the resulting tarball to see its size is sane:
# ls -lh /vz/template/cache
-rw-r--r-- 1 root root 53M Nov 15 12:40 ubuntu-7.10-i386-minimal.tar.gz
 
== Testing template cache ==
We can now create a container based on the just-created template cache. Be sure to change <tt>i386</tt> to your architecture just like you did when you named the tarball above.
[HW]# vzctl create 123456 --ostemplate ubuntu-7.10-<arch>-minimal
 
Now make sure that your new container it works:
[HW]# vzctl start 123456
[HW]# vzctl exec 123456 ps axf
 
You should see that a few processes are running.
 
Other tests that could be done are:
[HW]# vzctl enter 123456
[container]# ps axf
[container]# mount
[container]# dpkg -l
[container]# logout
[HW]#
 
Feel free to do more tests.
 
== Final cleanup ==
Stop and remove the test container you just created:
[HW]# vzctl stop 123456
[HW]# vzctl destroy 123456
[HW]# rm -f /etc/vz/conf/123456.conf.destroyed
 
Finally, let's remove the container we used for OS template cache creation:
[HW]# vzctl destroy 777
[HW]# rm -f /etc/vz/conf/777.conf.destroyed
 
== Updating the template cache ==
<big><big>To be continued</big></big>See [[Updating Ubuntu template]]
Anonymous user