= Sarge-Dapper (OldStable) ={{Warning|The OpenVZ packages at http://debian.systs.org/ aimed majority of the content on this page only applies to install OpenVZ in a easy wayolder, some task are done unsupported Debian versions and is archived on install process!this page for historical reasons only. '''The page you need is [[Installation on Debian]].'''}}
== edit apt source settings ==Add to your "/etc/apt/sourcesOpenVZ consists of a kernel, user-level tools, and container templates.list"
<pre> deb This guide tells how to install the kernel and the tools on [http://www.debian.systs.orgDebian] Etch or Lenny/ sarge openvz</pre>Squeeze.
and get For Squeeze, use the new package listsLenny directions.
<pre># apt-get update<For Wheezy (7.0), use the vzctl package included in wheezy, together with the Wheezy OpenVZ kernels from [http:/pre>/download.openvz.org/debian/ http://download.openvz.org/debian/]. Alternatively reduced functionality may be possible using the stock Debian Wheezy kernel (based on kernel.org version 3.2) and [[Vzctl_for_upstream_kernel]].
You may also wish to check the information on [http://wiki.debian.org/OpenVz the Debian wiki].
== precompiled kernel images For Etch users, this document explains how to partially upgrade to Debian Lenny and install from lenny repositories ('''use this options at debian.systs.org (dso) ==The kernel-images on debian.systs.org (dsoyour risk''') use the same kernel-config taken from OpenVZ.(most kernel-modules are built-in!)
If there is more than one CPU available (or a CPU with hyperthreading), use the kernel-smp deb.If there is more than 4 Gb of RAM available, use the kernel-enterprise deb.Otherwise, use the plain kernel deb (kernel).== Requirements ==
{| class="wikitable"== Filesystems ===|+'''Kernel flavors list''It's recommended that you use a separate partition for container private! Kernel type !! Description !! Hardware !! Use case|-! -| uniprocessor| up directories (by default <code>/var/lib/vz/private/<CTID></code>). The reason for this is that if you wish to 4GB of RAM||use the OpenVZ per-! -smp| symmetric multiprocessor| up container disk quota, you won't be able to 4 GB of RAM| 10use usual Linux disk quotas on the same partition. Bear in mind that "per-20 VPSs|-! -entnosplit| SMP + PAE support| up to 64 GB of RAM| 10-30 VPSs|-! -enterprise| SMP + PAE support + 4/4GB split| up to 64 GB of RAM| >20container quota" in this context includes not only pure per-30 VPSs|}container quota but also the usual Linux disk quota used in container, not on the [[HN]].
kernel-image: i368 and amd64<pre> ovzkernel-2At the very least try to avoid using the root partition for containers, because the root user of a container will be able to overcome the 5% disk space barrier in some situations.6If the HN root partition is completely filled, it will break the system.9 ovzkernel-2.6.9-smp</pre>
kernelOpenVZ per-image: i386 container disk quota is supported only:<pre> ovzkernel-2.6.9-enterprise ovzkernelfor ext2/ext3 filesystems; therefore it makes sense to use one of these filesystems (ext3 is recommended) if you need per-2.6container disk quota.9-entnosplit</pre>
OpenVZ tool=== Repository setup (sEtch only) for i386 and amd64<pre> vzctl vzquota vzprocps vzdump</pre>===
template(s) for i368 '''If you are using Debian Lenny, this step in no longer required. Openvz kernel packages and amd64 : Debian 3tools are available on main repository.1 Minimal<pre> vzctl-ostmpl-debian</pre>'''
== installing the kernel-images, toolset and debian-os-template ==Example: install the stable OpenVZ kernel, tools and Debian OS Template1. Using openvz.org repositories ====
# aptitude install ovzkernel-2At the moment two different repositories are online at http://download.6openvz.9 vzctl vzquota vzdump vzctl-ostmpl-debianorg:
; by Ola Lundqvist <opal@debian.org>
: (OpenVZ kernels only)
: apt-uri http://download.openvz.org/debian
Maybe you need to update your "linux; by Thorsten Schifferdecker <tsd@debian.systs.org>: apt-loader" uri http://download.openvz.org/debian-systs: (can be configured at Mirror of OpenVZ Repository from http:/etc/kernel-imgdebian.systs.conforg/)
{{Note|The next steps use the repository at http://download.openvz.org/debian-systs; the actual OpenVZ Tools for the "GRUB"Debian exist only as unstable builds, see http: //packages.debian.org/vzctl}}
# {{Note|By default, on Ubuntu systems root tasks are executed with [https:/sbin/grub-update help.ubuntu.com/community/RootSudo sudo]}}
This can be done via the following commands, as root or as privileged "sudo" user
<pre>
# echo -e "\ndeb http://download.openvz.org/debian-systs etch openvz" >> /etc/apt/sources.list
# wget -q http://download.openvz.org/debian-systs/dso_archiv_signing_key.asc -O- | apt-key add - && apt-get update
</pre>
Reboot in your new ==== 2. Using Debian Stable OpenVZ Systemrepositories (upgrade to lenny) ====
# rebootThere is even a '''lenny''' repository with kernel 2.6.28. '''Use it at your own risk!'''
Add lenny repositories to your '''/etc/apt/sources.list'''
<pre>
deb http://DEBIAN-MIRROR/debian/ testing main
deb http://DEBIAN-MIRROR/debian-security/ testing/updates main
</pre>
ThatEnlarge apt-cache adding to '''/etc/apt/apt.conf'''s all this line:<pre>APT::Cache-)Limit "100000000";</pre>
Now itGive etch package priority over lenny packages. Edit '''/etc/apt/preferences''s time to setup your VE's with the minimal Debian-3.1 Template, create new one or download another precreated OSand set like this:<pre>Package: *Pin: release a=etchPin-Template.Priority: 700
Package: *Pin: release a= Etch (Stable) =lennyPin-Priority: 650OpenVZ is now a part of Debian Etch repository.</pre>
== install the kernelThen '''apt-image ==get update && apt-get dist-upgrade''' to upgrade to lenny.
=== precompiled kernel images at download.openvz.org =Kernel installation ==
a Debian OpenVZ kernel repository is online, for direct access http://download.openvz.org/kernel/debian/etch/=== Wheezy and Lenny ===
{{Note|The best kernel to use is [[Download/kernel/rhel6|RHEL6-based]]. Please see [[Install_kernel_from_RPM_on_Debian_6.0]]}}
add to your "/etc/apt/sources.list"<pre> deb http://download.openvz.org/debian etch main</pre>=== Etch ===
update package lists<pre> # apt-get update</pre>==== 1. Using openvz kernel repositories ====
list downloadable {{Note|In case you want to recompile the OpenVZ linux-images<pre> # apt-cache search linux-image-2.6kernel yourself on Debian, see [[Compiling the OpenVZ kernel (the Debian way)]].18-openvz</pre>}}
install a First, you need to choose what kernel<pre> # apt-get you want to install <linux-image></pre>.
{| class=== precompiled "wikitable"|+'''OpenVZ Kernel list built with kernel images at debianconfig from http://download.systsopenvz.org ==='''! Kernel !! Description !! Hardware !! Debian Architecture|-! ovzkernel-2.6.18| uniprocessor| up to 4GB of RAM| i386 and amd64|-! ovzkernel-2.6.18-smp| symmetric multiprocessor| up to 4 GB of RAM| i386 and amd64|-! ovzkernel-2.6.18-enterprise| SMP + PAE support + 4/4GB split| up to 64 GB of RAM| i386 only|}
Add {| class="wikitable"|+'''OpenVZ Kernel list built with official Debian kernel config and OpenVZ Settings'''! Kernel !! Description !! Hardware !! Debian Architecture|-! fzakernel-2.6.18-686| uni- and multiprocessor| up to 4GB of RAM| i386|-! fzakernel-2.6.18-686-bigmem| symmetric multiprocessor| up to your "/etc/apt/sources64 GB of RAM| i386|-! fzakernel-2.6.list"18-amd64| uni- and multiprocessor| | amd64|-|}
<pre>
deb http://debian.systs.org/ etch openvz# apt-get install <kernel>
</pre>
Add ===== Configuring the signing key of debian.systs.org (dso) apt-keyring, (need root permissions)<pre> # wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | apt-key add -</pre>bootloader =====
and get In case GRUB is used as the new package listsboot loader, it will be configured automatically, or execute update-grub; lines similar to these will be added to the <tt>/boot/grub/menu.lst</tt> file:
<pre>
# apt[...] title Debian GNU/Linux, kernel 2.6.18-get updateovz-028stab051.1-686 root (hd0,1) kernel /vmlinuz-2.6.18-ovz-028stab051.1-686 root=/dev/sda5 ro vga=791 initrd /initrd.img-2.6.18-ovz-028stab051.1-686 savedefault[...]
</pre>
linux-image (version 028stab023.1):<pre> ovzkernel-{{Note|per default on debian/ubuntu, a 2.6.18 (i386 and amd64) ovzkernel-22 kernel will boot before a 2.6.18, please check manually the grub boot order. See man update-smp (i386 and amd64)grub for more details}} ovzkernel===== Installing the user-2.6.18-enterprise only (i386)</pre>level tools =====
# aptOpenVZ needs some user-get install <linux-image>level tools installed. Those are:
=== or build your own kernel-image ; vzctl: A utility to control OpenVZ containers (debian waycreate, destroy, start, stop, set parameters etc.) ===; vzquota: A utility to manage quotas for containers. Mostly used indirectly (by vzctl).
To install the kernel-source and the OpenVZ kernel patch, run:
<pre>
# [sudo] apt-get install kernel-package linux-source-2.6.18 kernel-patch-openvz libncurses5-devvzctl vzquota
</pre>
==== 2 Using Debian lenny repositories ====
Unpack the If you upgrade to lenny, you can search openvz kerneland can install with:<pre>apt-sourceget install linux-image-openvz-686</pre>this command will install latest kernel and all required packages like:
<pre>
# cd /usr/src # tar xjf apt-get install iproute libatm1 linux-sourceimage-2.6.18.tar.bz2 # cd 26-1-openvz-686 linux-sourceimage-openvz-2.6.18686 rsync vzctl vzquota libcgroup-dev
</pre>
and will arrange grub bootloader properly.
=== Rebooting into OpenVZ kernel ===
{{Warning|Before you restart your Server, verify that your system has all needed modules enabled in order to boot your harddisk (e.g. hardware modules, raid system(s), lvm2 etc). You may need a an INITRD (initramdisk) or to compile needed kernel configmodules statically.}}You can use Now reboot the machine and choose the config of OpenVZ Linux Kernel on the debian-kernel:<pre> # cp /boot/config-2loader menu.6.18-3If the OpenVZ kernel has been booted successfully, proceed to installing the user-686 level tools for OpenVZ.config</pre>
=== Confirm proper installation ===
Or get a 21.6.18 kernel config from httpKernel://download.openvz.org/kernel/devel/current/configs/
<pre>
# wget http://download.openvz.org/kernel/devel/current/configs/kerneluname -r 2.6.1826-028test0101-i686.config.ovz openvz-O .config686 #
</pre>
Now you can apply openvz 2. Openvz kernel patch and modify your kernel-configfacility:
<pre>
# ../kernel-patches/all/apply/openvzps ax | grep vz # make menuconfig2349 ? S 0:00 [vzmond]
</pre>
You need following OpenVZ kernel config settings3. A network interface for containers:
<pre>
# ifconfig venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (taken from a OpenVZ Kernel 20.60 B) TX bytes:0 (0.18-028test010.1 on 6860 B)</pre>
Filesystem\_ [*] Second extended fs support (CONFIG_EXT2_FS)\_ [*] Ext3 journalling file system support (CONFIG_EXT3_FS)\_ [*] Quota Support (CONFIG_QUOTA) \_ [*] Compatibility with older quotactl interface (CONFIG_QUOTA_COMPAT) \_ [*]Quota format v2 support (CONFIG_QFMT_V2)\_ [*] VPS filesystem (CONFIG_SIM_FS)\_ [*] Virtuozzo Disk Quota support (CONFIG_VZ_QUOTA) \-> [*] Per-user and per-group quota in Virtuozzo quota partitions (VZ_QUOTA_UGID)== Configuring ==
Security \->[ ] Enable different security models=== sysctl ===
There are a number of kernel parameters that should be set for OpenVZ to work correctly... (what else :-)\_[*] Virtual Environment support (CONFIG_VE) \_ These parameters are stored in <Mtt> VE calls interface (CONFIG_VE_CALLS) \_ /etc/sysctl.conf<M/tt> VE networking (CONFIG_VE_NETDEV) \_ <M> Virtual ethernet device (CONFIG_VE_ETHDEV) \_ <M> VE device (CONFIG_VZ_DEV) \_ [*] VE netfiltering (CONFIG_VE_IPTABLES) \_ <M> VE watchdog module (CONFIG_VZ_WDOG) \_ <M> Checkpointing & restoring Virtual Environments (CONFIG_VZ_CHECKPOINT)file. Here is the relevant part of the file; please edit it accordingly.
User resources {{Note|vzctl version from debian-systs, automatically inserts these options at the last of <tt>/etc/sysctl... (User Beancounters)\_ [*] Enable user resource accounting (CONFIG_USER_RESOURCE)\_ [*] Account physical memory usage ( CONFIG_USER_RSS_ACCOUNTING)\_ [*] Account disk IO (CONFIG_UBC_IO_ACCT)\_ [*] Account swap usage (CONFIG_USER_SWAP_ACCOUNTING)\_ [*] Report resource usage in /proc (CONFIG_USER_RESOURCE_PROC)\_ [*] User resources debug features (CONFIG_UBC_DEBUG)\_ [*] Debug kmemsize with cache counters (CONFIG_UBC_DEBUG_KMEM)conf</prett>, except for net.ipv4.ip_forward}}
<pre>
[...]
<pre># On Hardware Node we generally need INFO: Better to build the kernel-headers as well, so afterward other kernel-modules can built without whole kernel tree (e.g. drbd -> drbd0.7-module-source) See also : # make-kpkg --targets</pre>packet forwarding enabled and proxy arp disabled
net.ipv4.conf.default.forwarding=1
net.ipv4.conf.default.proxy_arp=0
net.ipv4.ip_forward=1
Compile your Kernel (as user root, or you need the --rootcmd!)# Enables source route verification<pre> # make-kpkg --append_to_version=-1-openvz --added_patches=openvz --revisionnet.ipv4.conf.all.rp_filter=1 --initrd binary-arch or all above with one step
# makeEnables the magic-kpkg --append_to_version=-1-openvz --added_patches=openvz --revisionsysrq keykernel.sysrq=1 --initrd --config menuconfig binary-arch</pre>
# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn=0
Install the kernel and update initramfs:# we do not want all our interfaces to send redirects<pre> # dpkg -i net.ipv4./linux-image-2conf.6default.18-send_redirects=1-openvz_1_i386net.deb # update-initramfs -c -k 2ipv4.conf.6all.18-1-openvz</pre>send_redirects=0
<pre> INFO: update-initramfs is done, when make-kpkg is use with --initrd option INFO: update-grub can be configured by /etc/kernel-img[.conf..]
</pre>
Update the bootloader (when not done above) GRUB : # [sudo] sysctl -p
# {{Note|You can make a symlink from /usrvar/sbinlib/updatevz to /vz as backwardcompatibility to OpenVZ as installed in other distributions(Debian vz root directory is /var/lib/vz to be FHS-grubcompliant.}}
INFO: since the Debian ETCH # [sudo] ln -release the location of update-grub is moved from /sbins /update-grub to var/usrlib/sbinvz /update-grub !vz
=== OS templates ===
== install {{Note|Support of OS templates on 64 bit hosts is somewhat limited for the toolset ==time being, so that not all tools or features are available - please see [[Making template tools to work on x86_64]] and [[Install OpenVZ on a x86 64 system Centos-Fedora]] for additional details and information on possible workarounds}}
You To install a container, you need the toolset for manage-ing OpenVZ Virtual Enviromennt OS template(VEs).
<pre> # apt-get install vzctl vzquota<Precreated templates can be found [http:/pre>/wiki.openvz.org/Download/template/precreated here] and [http://download.openvz.org/contrib/template/precreated/ here].
You can create your own templates, see
[[Debian template creation]], [[Ubuntu Gutsy template creation]] and [[:Category: Templates]].
= modify needed settings ={{Note|Setup your prefered standard OS Template : edit the /etc/vz/vz.conf}}
If you want network access for the virtual server then you need to enable IP forwarding # [sudo] apt-get install vzctl-ostmpl-debian-5.0-i386-minimal
An old (before Etch) Debian Way: set "ip_forward" to yes in /etc/network/option.== Additional User Tools ==
# editor /etc/network/options; vzprocps: A set of utilities to provide system information (vzps and vztop)
The new (from Etch) standard way is ; [[vzdump]]: A utility to use sysctl for this (see below)backup and restore container.
# [sudo] apt-get install vzprocps vzdump
In some cases you may need to enable proxy_arp for the network devices that you want your virtual hosts to be accessible on.
You can add this to a specific interface in the network configuration (/etc/network/interfaces) by the following lines, replace %DEV% with your device name (ie. eth0).
Example:On Debian squeeze, vzdump seems packaged in standard aptline. For lenny, See [[Backup_of_a_running_container_with_vzdump]]
<pre>
[...]
# device: %DEV%
iface %DEV% inet static
address 192.168.0.2
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
up sysctl -w net.ipv4.conf.%DEV%.proxy_arp=0 pre-down sysctl -w net.ipv4.conf.%DEV%.proxy_arp=1 [...]</pre>Secure it ==
If you want to secure your container with individual firewall rules (instead or use additionally to securing the /etc/network/if-up/ and /etc/network/if-downhost node) then you must run iptables inside the container.d/ directoriesThis works slightly different than on a physical server. So make sure that you check that iptables rules are indeed applied as expected inside the container.
<pre> INFO: # man 5 interfaces (to read more about debian's network interface configuration for ifup and ifdown) INFO: It is recommanded to add Iptables modules required by the magic-sysrq key, to your /etc/sysctlcontainer must be specified in the general vz.conf file or the vzXXX.conf</pre>file of the container.
a (plain) OpenVZ Linux Way:Add the following line into vz.conf to activate the respective iptables modules for all containers.
Add settings to IPTABLES="/etc/sysctl.confip_tables ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_LOG ipt_conntrack ipt_helper ipt_state iptable_nat ip_nat_ftp ip_nat_irc ipt_TOS"
<pre> # On Hardware Node we generally need # packet forwarding enabled and proxy arp disabled net[[http://wiki.ipv4debian.ip_forward = 1 netorg/DebianFirewall][Configure]] your iptable rules inside the container.ipv4.conf.default.proxy_arp = 0
# Enables source route verification net.ipv4.conf.all.rp_filter = 1{{Warning|Note that iptables rules inside the container are not applied automatically as on a physical server by starting the iptables module! Follow the instructions below}}
# Enables To make sure the magic-sysrq key kernel.sysrq = 1iptables rules are applied on a startup/reboot we'll create a new file:
# TCP Explict Congestion Notification # netnano /etc/network/if-pre-up.ipv4.tcp_ecn = 0d/iptables
# we do not want all our interfaces Add these lines to send redirects net.ipv4.conf.default.send_redirects = 1 net.ipv4.conf.all.send_redirects = 0 </pre>it:
#!/bin/bash
/sbin/iptables-restore < /etc/iptables.up.rules
<pre> INFOThe file needs to be executable so change the permissions: Suggestion: Please make a symlink from /var/lib/vz to /vz as backward compability to Main OpenVZ (Debian vz root directory is installed FHS-like to /var/lib/vz)
# ln -s chmod +x /varetc/libnetwork/vz if-pre-up.d/vz</pre>iptables
Start iptables
'''Before you restart your Server, keep in mind, that your system has all needed modules enabled; booting from your harddisk (e.g. hardware modules, raid system(s), lvm2 /etc). May you need a INITRD (initramdisk) or compile needed kernel modules statically in/init.'''d/iptables start
If the startup shows errors then you have probably not activated the needed iptables modules. See above.
# rebootCheck inside the container that your iptables rules are indeed applied:
iptables -L
If the rules do not show up as you would expect on a physical server then you might not have activated the needed iptables modules.
That's all== Start it!==
Now it's time to create a OS Template or download another precreated OS-Template # [sudo] /etc/init.d/vz start
This does not make the vz system automatically start at boot time. For automatic start:
INFO: Suggestions: Setup your default OS Template in /etc/# [sudo] update-rc.d vz/vz.confdefaults 98
== Use it! ==
After installing the OpenVZ kernel, user tools and a minimal OS template
to create a first container and do some [[basic operations in OpenVZ environment]]. Read the [[download:doc/OpenVZ-Users-Guide.pdf]], browse this wiki.
[[Category: HOWTO]]
[[Category: Debian]]
[[Category: Installation]]