Different kernel flavors (UP, SMP, ENTERPRISE, ENTNOSPLIT)

OpenVZ project releases several different precompiled kernels for each version. Which kernel to choose depends on what hardware do you have. The table below describes the cases when it is better to use each of these kernels.

Kernel flavors list

Kernel type	Description	Hardware	Use case
UP	uniprocessor	up to 4GB of RAM
SMP	symmetric multiprocessor	up to 4 GB of RAM	10-20 VPSs
entnosplit	SMP + PAE support	up to 64 GB of RAM	10-30 VPSs
enterprise	SMP + PAE support + 4/4GB split	up to 64 GB of RAM	>20-30 VPSs

These kernels are optimized for these types of hardware configurations and usage scenarios, so choosing the right kernel can help to boost performance by about 5 to 15 per cent.

Note: Use rpm -ihv command for ovzkernel RPM installation. Please do not use the rpm -Uhv command to install the kernel, otherwise all the previously installed kernels may be removed from your system.

Note: When using a 64-bit processor and operating system, you need only select the SMP or non-SMP version. 64-bit linux can access the entire 64Gb of ram in ZONE_NORMAL (low memory). PAE and 4GB/4GB splitting are only needed for 32-bit OS, and so are not necessary and are disabled by default in 64-bit kernels.