Difference between revisions of "IPv6 Configuration"
(First cut at actual documentation) |
(No difference)
|
Revision as of 07:09, 12 December 2008
Configuring IPV6 in a VE
Assuming you want to add globally routable ipv6 addresses to your VEs, follow these instructions.
Preparation
On the HN, first make sure /etc/vz/vz.conf has IPV6="yes" and your HN is working correctly for ipv6.
On the HN, do:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
Adding each VE
On the HN, do:
vzctl set $VEID --ipadd 2001:xxxx:xxxx::xxxx --save
To enable the HN to reply to Neighbor Solicitation requests, do:
ip -6 neigh add proxy 2001:xxxx:xxxx::xxxx dev eth0
