38
edits
Changes
First cut at actual documentation
= Configuring IPV6 in a VE =
Assuming you want to add globally routable ipv6 addresses
to your VEs, follow these instructions.
== Preparation ==
On the HN, first make sure /etc/vz/vz.conf has IPV6="yes"
and your HN is working correctly for ipv6.
On the HN, do:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
== Adding each VE ==
On the HN, do:
vzctl set $VEID --ipadd 2001:xxxx:xxxx::xxxx --save
To enable the HN to reply to Neighbor Solicitation requests, do:
ip -6 neigh add proxy 2001:xxxx:xxxx::xxxx dev eth0
Assuming you want to add globally routable ipv6 addresses
to your VEs, follow these instructions.
== Preparation ==
On the HN, first make sure /etc/vz/vz.conf has IPV6="yes"
and your HN is working correctly for ipv6.
On the HN, do:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp
== Adding each VE ==
On the HN, do:
vzctl set $VEID --ipadd 2001:xxxx:xxxx::xxxx --save
To enable the HN to reply to Neighbor Solicitation requests, do:
ip -6 neigh add proxy 2001:xxxx:xxxx::xxxx dev eth0
