Difference between revisions of "Modifying initrd image"
m (typo fixed in →Creating initrd) |
(→Analyzing init script) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 98: | Line 98: | ||
We can see that init tries to load modules <code>mptbase.ko</code> and <code>mptscsih.ko</code>. | We can see that init tries to load modules <code>mptbase.ko</code> and <code>mptscsih.ko</code>. | ||
| − | Check for | + | Check for presence of these modules on initrd image: |
<pre> | <pre> | ||
$ ls -1 ./lib/ | $ ls -1 ./lib/ | ||
| Line 106: | Line 106: | ||
So they are here... But on the [[Hardware Node|node]] in question there is a device supported by driver in another module: | So they are here... But on the [[Hardware Node|node]] in question there is a device supported by driver in another module: | ||
| − | <code> | + | <code>mptspi.ko</code>! After adding it to the image and into init script everything should work. |
==Creating initrd== | ==Creating initrd== | ||
We just have to cpio and gzip directory cpio: | We just have to cpio and gzip directory cpio: | ||
<pre> | <pre> | ||
| − | $ find ./ | cpio -o > /boot/new-initrd. | + | $ find ./ | cpio -H newc -o > /boot/new-initrd.cpio |
1354 blocks | 1354 blocks | ||
| + | $ cd /boot | ||
| + | $ gzip new-initrd.cpio | ||
| + | $ mv new-initrd.cpio.gz new-initrd.img | ||
</pre> | </pre> | ||
Latest revision as of 10:48, 28 September 2015
The frequent reason why your kernel can't boot is not properly created initrd image. Here is a small description of what you can do if you encounter a similar problem.
Contents
What is initrd image[edit]
Your boot loader usually supports initrd instruction.
For example, in GRUB:
OpenVZ (2.6.8-022stab077)
root (hd0,0)
kernel /vmlinuz-2.6.8-022stab077 ro root=LABEL=/ console=tty0
initrd /initrd-2.6.8-022stab077.img
GRUB loads initrd-2.6.8-022stab077.img file at a certain address in memory. When kernel boots, it checks for initrd image, and if it exists starts init script that resides on this image. init script is usually written in nash (a sort of bash-like shell, just smaller). When init script on initrd image is finished, kernel usually calls standard System V init process (/sbin/init, etc.)
Why initrd image is necessary[edit]
Suppose your root partion resides on some SCSI device and driver for this SCSI devices is compiled as a kernel module. Of course this module is required at boot time to have access to the root partion — but it is not in the kernel. Thus the need for an initrd image.
Additionally after udev subsystem become common, somebody has to start udev to create device nodes. This is initrd's duty too.
Typical problem[edit]
Consider a real problem. After booting the kernel we get the following:
... Creating root device mkrootdev: label / not found Mounting root filesystem mount: error 2 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not sysncing: Attempted to kill init!
This can appear if there is no module loaded for device, where root partion resides. To solve the problem, extract the initrd image.
Extracting initrd image[edit]
Initrd image is just cpio-gzip archive. So to extract it:
$ mkdir initrd $ cd initrd $ gzip -dc /boot/initrd-2.6.16-026test014.4-smp.cpio | cpio -id $ ls -1 bin dev etc init initrd-2.6.16-026test014.4-smp.cpio lib loopfs proc sbin sys sysroot
Analyzing init script[edit]
$ cat init #!/bin/nash mount -t proc /proc /proc setquiet echo Mounted /proc filesystem echo Mounting sysfs mount -t sysfs none /sys echo Creating /dev mount -o mode=0755 -t tmpfs none /dev mknod /dev/console c 5 1 mknod /dev/null c 1 3 mknod /dev/zero c 1 5 mkdir /dev/pts mkdir /dev/shm echo Starting udev /sbin/udevstart echo -n "/sbin/hotplug" > /proc/sys/kernel/hotplug echo "Loading mptbase.ko module" insmod /lib/mptbase.ko echo "Loading mptscsih.ko module" insmod /lib/mptscsih.ko /sbin/udevstart echo Creating root device mkrootdev /dev/root umount /sys echo Mounting root filesystem mount -o defaults --ro -t ext3 /dev/root /sysroot mount -t tmpfs --bind /dev /sysroot/dev echo Switching to new root switchroot /sysroot umount /initrd/dev
We can see that init tries to load modules mptbase.ko and mptscsih.ko.
Check for presence of these modules on initrd image:
$ ls -1 ./lib/ mptbase.ko mptscsih.ko
So they are here... But on the node in question there is a device supported by driver in another module:
mptspi.ko! After adding it to the image and into init script everything should work.
Creating initrd[edit]
We just have to cpio and gzip directory cpio:
$ find ./ | cpio -H newc -o > /boot/new-initrd.cpio 1354 blocks $ cd /boot $ gzip new-initrd.cpio $ mv new-initrd.cpio.gz new-initrd.img
Next, try to boot your kernel with newly created initrd image.
Who create initrd by default?[edit]
Usually there is an mkdinitrd package installed, that allows to create
initrd image. You can use this program, it has a lot of options. OpenVZ kernel RPM-package (and “make install” target too) uses this
program to create an initial (default) initrd image.
