Changes

Jump to: navigation, search

Using private IPs for Hardware Nodes

No change in size, 14:36, 31 August 2007
m
misprint eth0 -> eth1
== (2) An OVZ Hardware Node has two ethernet interfaces ==
Assume you have 2 interfaces eth0 and eth1 and want to separate local traffic (10.0.0.0/24) from the external traffic.
Let's assign eth0 for the external traffic and eth0 eth1 for the local one.
If there is no aim to make VE accessible from HN and vice versa, it's enough to replace 'br0' with 'eth1' in the following steps of above configuration:

Navigation menu