|
|
| Line 1: |
Line 1: |
| − | ==== ssh authentication for non-root users in Mac OS X NetRestore images ====
| + | Every exit is an entry somewhere else. |
| − | | |
| − | After deployment of the image "SnowLeopard_Desktop-10-6-2" it is impossible to authorize to MAC node using
| |
| − | password authentication method because it is disabled by default for this image (only publickey and
| |
| − | keyboard-interactive are available).
| |
| − | | |
| − | As far as autotests could use only password authentication, it becomes impossible to run the tests at all. As
| |
| − | a result, it blocks PVA4.6 release.
| |
| − | | |
| − | How to activate password authentication:
| |
| − | * login to Mac node (via direct console or SSH)
| |
| − | * open file /etc/sshd_config for edit
| |
| − | * in the file find the string: #PasswordAuthentication no
| |
| − | * replace it with the string: PasswordAuthentication yes
| |
| − | * save changes
| |
| − | | |
| − | Everything should be fine after that.
| |
| − | | |
| − | HowTo reproduce/check:
| |
| − | * open PuTTY and input Mac node address
| |
| − | * open SSH/Auth option, uncheck "Attempt "keyboard-interactive" auth (SSH-2)"
| |
| − | * click "Open" and try to login to node. If there is no error alert and login is fine, then problem is
| |
| − | fixed. Otherwise it still exists.
| |
| − | | |
| − | ==== /etc/vztt/url.map ====
| |
| − | vim ''/etc/vztt/url.map'' for ez templates (not sure if it's even worth to remember):
| |
| − | <pre>
| |
| − | # moved from /etc/vztt/vztt.conf for compatibility
| |
| − | #$SW_SERVER http://vzdownload.swsoft.com
| |
| − | $SW_SERVER http://repo/ez
| |
| − | $FC_SERVER http://repo
| |
| − | #$FC_SERVER http://fedora.redhat.com
| |
| − | #$CE_SERVER http://mirror.centos.org
| |
| − | $CE_SERVER http://repo/pub
| |
| − | #$SUSE_SERVER/pub/opensuse http://download.opensuse.org
| |
| − | $DEB_SERVER http://ftp.ru.debian.org
| |
| − | $RH_SERVER http://repo
| |
| − | $SLES_SERVER http://repo
| |
| − | #$SUSE2_SERVER ftp://ftp.suse.com
| |
| − | $UBU_SERVER http://archive.ubuntu.com
| |
| − | $OR_SERVER http://repo
| |
| − | $SUSE_SERVER http://repo
| |
| − | $SUSE2_SERVER http://repo
| |
| − | </pre>
| |
| − | | |
| − | === Assorted pieces of knowledge ===
| |
| − | ==== Different Python version specified directly in jobs ====
| |
| − | At the moment PV SDK used in products is x64, so we fixed the NetRestore image and use the native Python, not x32 one. Back in good old PD6 days PV SDK was x32, so it's incompatible with x64 Python (maxint is '9' when it's x64 and '2' when it's x32):
| |
| − | <pre>
| |
| − | >>> import prlsdkapi
| |
| − | dlopen(/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/prlsdkapi/prlsdk.so, 2): no suitable image found. Did find:
| |
| − | /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/prlsdkapi/prlsdk.so: mach-o, but wrong architecture
| |
| − | Traceback (most recent call last):
| |
| − | File "<stdin>", line 1, in <module>
| |
| − | File "/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/prlsdkapi/__init__.py", line 28, in <module>
| |
| − | raise ImportError, err
| |
| − | ImportError: Cannot import module "prlsdk" !
| |
| − | >>> import sys
| |
| − | >>> sys.maxint
| |
| − | 9223372036854775807
| |
| − | </pre>
| |
| − | Here's a work-around (deployers will fix the issue in the future, Python x32 will be installed if a product is PD6):
| |
| − | * from man python:
| |
| − | <pre>
| |
| − | 64-BIT SUPPORT
| |
| − | % export VERSIONER_PYTHON_PREFER_32_BIT=yes # Bourne-like shells
| |
| − | </pre>
| |
| − | * so the idea is to replace every 'python' in jobs directory with this thing:
| |
| − | <pre>
| |
| − | shams@shams pls-jobs$ grep python *
| |
| − | vzt_autocompact_lin.py: cmdline = ("python vzt-autocompact/bin/vzt-autocompact "
| |
| − | shams@shams pls-jobs$ sed -i 's@python@VERSIONER_PYTHON_PREFER_32_BIT=yes &@' *.py
| |
| − | shams@shams pls-jobs$ grep python *
| |
| − | vzt_autocompact_lin.py: cmdline = ("VERSIONER_PYTHON_PREFER_32_BIT=yes python vzt-autocompact/bin/vzt-autocompact "
| |
| − | </pre>
| |
| − | * there were several other service files which were damaged, so it's better to exclude them while fixing other stuff (it always appears that good old pipes never betray you):
| |
| − | <pre>
| |
| − | shams@shams pls-jobs$ for i in `grep -l python * -R | grep -v configure.py | grep -v venet.py`; do echo sed -i 's@python@VERSIONER_PYTHON_PREFER_32_BIT=yes &@' $i; done
| |
| − | </pre>
| |
| − | | |
| − | ==== Installing products on Ubuntu (disk partitioning work-around) ====
| |
| − | Ubuntu disks are partitioned in a pretty weird way, so it's better to copy run files to ''/home'', create '/tmp' there and slightly fix the executable file:
| |
| − | <pre>
| |
| − | TMPROOT=${TMPDIR:=/home/tmp}
| |
| − | </pre>
| |
| − | ==== PMC for PWE Lin servers workaround ====
| |
| − | At the moment it's impossible to connect to PWE Lin servers via PMC because prl_disp_service doesn't listen to 64000 port by default. It's possible to fix it in two ways:
| |
| − | <ol><li>Change default value of '''<nowiki><ListenAnyAddr>0</ListenAnyAddr></nowiki>''' in ''/etc/parallels/dispatcher.workstation.xml'' to '''1'''</li>
| |
| − | {{Note2|Stop the dispatcher before (''/etc/init.d/'' etc) and start it after xml is changed!}}
| |
| − | <li>Check the box '''connect PMC directly to the host computer''' in PWE ''File -> Preferences --> Iphone''</li></ol>
| |
| − | [[Image:Pmc-hint-in-PWE.png]]
| |
| − | {{Note2|At the moment this check-box is not added, so the one for Parallels Mobile will do the thing, too (the same port is used)}}
| |
| − | | |
| − | ==== Missing libraries while test runs ====
| |
| − | <pre>
| |
| − | DEBUG:root:local cmd: '/root/vzt-parallels-vm-install/lib/tools/BMPEntry4Lin /vzt/tmp/tmprFLsbI/current_screen.bmp /vzt/tmp/tmprFLsbI/01-300-220-190-40.bmp'
| |
| − | /root/vzt-parallels-vm-install/lib/tools/BMPEntry4Lin: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory
| |
| − | </pre>
| |
| − | Library is missed, so:
| |
| − | <pre>
| |
| − | # ldd /root/vzt-parallels-vm-install/lib/tools/BMPEntry4Lin
| |
| − | linux-gate.so.1 => (0x006e7000)
| |
| − | libstdc++.so.6 => not found
| |
| − | libgcc_s.so.1 => not found
| |
| − | libc.so.6 => /lib/libc.so.6 (0x00be7000)
| |
| − | /lib/ld-linux.so.2 (0x00bc5000)
| |
| − | # rpm -q libstdc++
| |
| − | libstdc++-4.4.4-13.el6.x86_64
| |
| − | # rpm -ql libstdc++
| |
| − | /usr/lib64/libstdc++.so.6
| |
| − | /usr/lib64/libstdc++.so.6.0.13
| |
| − | # file /root/vzt-parallels-vm-install/lib/tools/BMPEntry4Lin
| |
| − | /root/vzt-parallels-vm-install/lib/tools/BMPEntry4Lin: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.2.5, not stripped
| |
| − | </pre>
| |
| − | So it needs to be installed:
| |
| − | <pre>
| |
| − | yum install libstdc++.i686
| |
| − | </pre>
| |
| − | So now it's here and can be found, yay:
| |
| − | <pre>
| |
| − | ldd /root/vzt-parallels-vm-install/lib/tools/BMPEntry4Lin
| |
| − | linux-gate.so.1 => (0x002df000)
| |
| − | libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x005d9000)
| |
| − | libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00da3000)
| |
| − | libc.so.6 => /lib/libc.so.6 (0x00be7000)
| |
| − | libm.so.6 => /lib/libm.so.6 (0x0016a000)
| |
| − | /lib/ld-linux.so.2 (0x00bc5000)
| |
| − | </pre>
| |
| − | | |
| − | ==== VMs' flags ====
| |
| − | {| class="wikitable" style="text-align:left"
| |
| − | |-
| |
| − | ! force run in 32/64-bit mode
| |
| − | | vm.app_mode=32/64
| |
| − | |-
| |
| − | ! no vtx/svm (cne mode)
| |
| − | | kernel.hvt_support=0
| |
| − | |-
| |
| − | ! suspend/resume verbose
| |
| − | |vm.sare_verbose=1
| |
| − | |}
| |
| − | | |
| − | You don't need to stop VM to edit the config file (config.pvs) to add some flags. Simply suspend a VM, edit ''config.pvs'' file which is in VM's directory. '''SystemFlag''' is what you look for.
| |
| − | <pre>
| |
| − | <SystemFlags>vm.default_answers=13014:16015; vm.assert=1</SystemFlags>
| |
| − | </pre>
| |
| − | For hanging guests the best choice is ''vm.assert=1''. Resume a VM and see the difference in parallels.log for the guest.
| |
| − | | |
| − | ==== DNS dynamic dhcp clients ====
| |
| − | {{Note|There should be only '''nameserver 10.30.0.1''' in ''/etc/resolv.conf'', any other weird crap should be removed.}}
| |
| − | <pre>
| |
| − | $GENERATE 1-254 $.255 PTR dhcp27-${0,2,x}.qa.
| |
| − | ---------------------------------------------------------
| |
| − | GENERATE 1-254 dhcp27-${0,2,x} A 10.27.255.$
| |
| − | </pre>
| |
| − | | |
| − | ==== fedora/adobe sound troubles fix howto ====
| |
| − | <pre>
| |
| − | sudo sed -i 's,\(^[[:space:]]*\)\(exec "$prog" ${1+"$@"}\),\1LD_PRELOAD=/usr/local/lib64/mymemcpy.so \2,' /usr/lib64/firefox-3.6/run-mozilla.sh
| |
| − | </pre>
| |
| − | | |
| − | ==== winsshd for win guests setting up ====
| |
| − | | |
| − | * WinSSHD control panel -> ''Settings'' tab -> ''Edit/View settings'' button -> Virtual Accounts -> Add new virtual user '''root'''. Please make sure the following fields are filled properly:
| |
| − | {| class="wikitable" style="text-align:left"
| |
| − | |-
| |
| − | ! Virtual account name
| |
| − | | root
| |
| − | |-
| |
| − | ! Virtual group
| |
| − | | Virtual Admins
| |
| − | |-
| |
| − | ! Windows account domain
| |
| − | | hostname
| |
| − | |-
| |
| − | ! Windows account name
| |
| − | | Administrator
| |
| − | |-
| |
| − | ! Public keys
| |
| − | | import id_rsa.pub
| |
| − | |}
| |
| − | {{Warning2| You need to uncheck "Use default Windows account" check-box and leave the rest of things except those specified in the table above AS DEFAULT.}}
| |
| − | {{Note2| Specify the win domain name exactly as cmd 'hostname' output will show it. Or you can look up this name in System -> Properties -> Advanced system settings -> 'Name' tab: full computer name.}}
| |
| − | * Don't forget to cache password for Administrator (as it shown on the picture below):
| |
| − | [[Image:Winsshd-passwd-cache.png]]
| |
| − | * If WinSSHD is configured properly, you're able to access your host/guest via ssh. Sometimes you've got the following SSH error:
| |
| − | <pre>
| |
| − | Authentication partiall success.
| |
| − | Permission denied (publickey,gssapi-with-mic)
| |
| − | </pre>
| |
| − | Try to reset ''Administrator'' password in Computer -> Manage -> System tools -> Local users and groups -> right-click Administrator -> Set password.
| |
| − | | |
| − | ==== To get more info on dhcp conficts ====
| |
| − | * '''tcpdump'''
| |
| − | <pre>
| |
| − | qagw> sudo tcpdump -i vlan29 -s 1024 -vvvvv -e -n ether host M:A:C:Addr
| |
| − | </pre>
| |
| − | * mii-tool eth0 or ethtool eth0
| |
| − | | |
| − | ==== To create a custom WinPE image ====
| |
| − | {{Note|You need to re-create WinPE image for the given server if you change its drivers in ''C:\Inetpub\wwwroot\inst\windows\drivers\SWID\''!}}
| |
| − | {{Note|For new Intel servers only ''pnpbd-intel-15.6.1'' is needed, skip all the Win* stuff from the good old days.}}
| |
| − | * Login to rome
| |
| − | * Create a folder with drivers in ''C:\Inetpub\wwwroot\inst\windows\drivers'' (folder name should be ''exactly'' the same as inv_no on rome)
| |
| − | * Management console -> WinPE tab -> Manage WinPE
| |
| − | [[Image:Winpe-custom-image-1.png]]
| |
| − | * Choose WinPE version (1x for old Wins, 2x for new ones) and architecture type. Also you can create new image (empty one or including drivers you found) or copy one. For some Win distros (Win7) empty image would work (w/o drivers specified; some of them are already on board)
| |
| − | [[Image:Winpe-custom-image-2.png]]
| |
| − | * Press 'Start' and enjoy once it's over.
| |
| − | [[Image:Winpe-custom-image-3.png]]
| |
| − | | |
| − | ==== To set X for lin nodes ====
| |
| − | ===== Custom packages install =====
| |
| − | <pre>
| |
| − | yum install xclock xauth screen xorg-x11-fonts* xorg-x11-server-Xorg xorg-x11-apps xorg-x11-twm
| |
| − | # if the browser is needed, then it's worth to remember that this is x64 filrefox:
| |
| − | firefox.x86_64
| |
| − | </pre>
| |
| − | '''To install license key''' from command line:
| |
| − | <pre>
| |
| − | prlsrvctl install-license -k RM3QZY-HDR34G-FN3FQR-QILKS8-54RGVB
| |
| − | </pre>
| |
| − | | |
| − | ===== Manual whole group install =====
| |
| − | * for RHEL5:
| |
| − | <pre>
| |
| − | # yum groupinstall "X Window System"
| |
| − | # yum groupinstall "GNOME Desktop Environment"
| |
| − | </pre>
| |
| − | * for RHEL6:
| |
| − | <pre>
| |
| − | # yum groupinstall "X Window System"
| |
| − | # yum groupinstall "Desktop"
| |
| − | </pre>
| |
| − | | |
| − | ===== start X:xdpyinfo problems =====
| |
| − | * Does work:
| |
| − | <pre>
| |
| − | # export DISPLAY=:0; xdpyinfo
| |
| − | name of display: :0.0
| |
| − | version number: 11.0
| |
| − | vendor string: Red Hat, Inc.
| |
| − | vendor release number: 10707000
| |
| − | maximum request size: 16777212 bytes
| |
| − | motion buffer size: 256
| |
| − | bitmap unit, bit order, padding: 32, LSBFirst, 32
| |
| − | image byte order: LSBFirst
| |
| − | number of supported pixmap formats: 7
| |
| − | supported pixmap formats:
| |
| − | depth 1, bits_per_pixel 1, scanline_pad 32
| |
| − | depth 4, bits_per_pixel 8, scanline_pad 32
| |
| − | depth 8, bits_per_pixel 8, scanline_pad 32
| |
| − | depth 15, bits_per_pixel 16, scanline_pad 32
| |
| − | depth 16, bits_per_pixel 16, scanline_pad 32
| |
| − | depth 24, bits_per_pixel 32, scanline_pad 32
| |
| − | depth 32, bits_per_pixel 32, scanline_pad 32
| |
| − | keycode range: minimum 8, maximum 255
| |
| − | focus: window 0x1a0002c, revert to Parent
| |
| − | number of extensions: 26
| |
| − | visual:
| |
| − | visual id: 0x10c
| |
| − | class: DirectColor
| |
| − | depth: 24 planes
| |
| − | available colormap entries: 256 per subfield
| |
| − | red, green, blue masks: 0xff0000, 0xff00, 0xff
| |
| − | significant bits in color specification: 8 bits
| |
| − | visual:
| |
| − | visual id: 0x67
| |
| − | class: TrueColor
| |
| − | depth: 32 planes
| |
| − | available colormap entries: 256 per subfield
| |
| − | red, green, blue masks: 0xff0000, 0xff00, 0xff
| |
| − | significant bits in color specification: 8 bits
| |
| − | </pre>
| |
| − | | |
| − | * Doesn't work:
| |
| − | <pre>
| |
| − | # export DISPLAY=:0; xdpyinfo
| |
| − | xdpyinfo: unable to open display ":0".
| |
| − | </pre>
| |
| − | | |
| − | ==== To view screens info ====
| |
| − | <pre>
| |
| − | ps -o stime,pid,cmd -C screen
| |
| − | </pre>
| |
| − | | |
| − | ==== To resurrect deploy after power failure and when deploy is fucked up in general ====
| |
| − | <pre>
| |
| − | 1. Switch on both hosts, rome and carthage.
| |
| − | 2. Log in to rome remotely and start services (dpsvc [parallels deployment service], prlwatchdog [parallels notification watchdog], ‘TFtpd32 svc’). DB on carthage starts automatically.
| |
| − | 3. Run the cmd-string:
| |
| − | sc stop dpsvc&sc start dpsvc&sc stop prlwatchdog&sc start prlqatchdog&sc stop TFtpd32 svc&sc start TFtpd32 svc
| |
| − | </pre>
| |
| − | | |
| − | ==== To blow life into freshly deployed win server networking ====
| |
| − | If you deploy machine for the first time and it cannot find drivers, then do the following:
| |
| − | <pre>
| |
| − | 1. Insert a flash with drivers
| |
| − | 2. IE: ''\\10.29.0.1'' (or ''\\rome\c$'') Inetpub/wwwroot/inst/windows/drivers/
| |
| − | 3. Create new folder = <deploy ID of this server> (for mccp8 this folder will be ''7192'')
| |
| − | 4. Check the type of Ethernet card (''My PC -> Properties -> Hardware -> Device manager'') and copy to this new folder the proper folders with drivers from flash (for mccp8 these are ''winxp64'', ''win64'', ''win32'').
| |
| − | 5. To check these drivers are really adopted by deploy, on the server you're setting go to ''Device manager'' right click ''Ethernet controller'' and choose ''Update drivers'' option from menu.
| |
| − | </pre>
| |
| − | | |
| − | ==== To reinstall mac via command line ====
| |
| − | <pre>
| |
| − | python dpctl.py deploy_image -I 148 -i "Leopard_Desktop_10-5-7" -e user@domain.com --service=rome -o "Mac OS"
| |
| − | --attribute="dmgdrive=Macintosh HD"
| |
| − | </pre>
| |
| − | ==== PD5 mac hints: vnc enabling, knowing an arch of a given mac, installing a build manually ====
| |
| − | # To start VNC Server on mac: ssh root@macx and execute:
| |
| − | <pre>
| |
| − | # sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/kickstart
| |
| − | -activate -configure -access -on -users kim -privs -all -restart -agent -menu -clientopts
| |
| − | -setvnclegacy -vnclegacy yes -setvncpw -vncpw PASSWD
| |
| − | </pre>
| |
| − | # for a given mac to be available via ssh on port 22, you need to check the Remote Login check-box (''System Preferences -> Sharing -> Remote Login'' service on). Deploy enables port 302 executing the postinstall script.
| |
| − | # To know which ARCH is a given mac:
| |
| − | <pre>
| |
| − | # sysctl -A | grep cpu64bit
| |
| − | hw.cpu64bit_capable:1 (this means it's x86_64)
| |
| − | hw.cpu64bit_capable:0 (this means it's i386)
| |
| − | </pre>
| |
| − | or even like this:
| |
| − | <pre>
| |
| − | mac16:~ root# sysctl -a | grep -e cpu64bit -e hw.model -e hw.ncpu
| |
| − | hw.model = MacBook2,1
| |
| − | hw.ncpu = 2
| |
| − | hw.ncpu: 2
| |
| − | </pre>
| |
| − | # If deploying an image with deploy fails, it's possible to install new PD build by
| |
| − | copying it from another mac (better store it in /), or simply vnc to a given mac, open
| |
| − | http://s01/Sumer/ , sort by name, choose a new build NOT MARKED "in progress"
| |
| − | it should also contain "mac" directory (avoid builds with "mac.r" and such)
| |
| − | # If installing the tests via deploy also fails, it's possible to install them manually:
| |
| − | <pre>
| |
| − | # curl http://s01/Sumer/3.0.3251.202085/mac/ (there's no wget, so use curl)
| |
| − | # curl -o pythontests-4.0.3251.202085.zip http://s01/Sumer/3.0.3251.202085/mac/
| |
| − | pythontests-4.0.3251.202085.zip
| |
| − | # curl -o desktop-unittests-4.0.3251.202085.zip http://s01/Sumer/3.0.3251.202085/
| |
| − | mac/desktop-unittests-4.0.3251.202085.zip
| |
| − | </pre>
| |
| − | # to force netboot on macs (if you press 'N' stubborn mac still ignores your wishes and wants to boot from hard disk):
| |
| − | <pre>
| |
| − | # sudo bless --netboot --server bsdp://255.255.255.255
| |
| − | </pre>
| |
| − | {{Warning2|HDD needs to be called Macintosh HD in this case}}
| |
| − | | |
| − | ==== To reinstall lin server via command line ====
| |
| − | <pre>
| |
| − | python dpctl.py deploy_image -e user@domain.com -i fedora-10-x86_64 -I 7043 --attribute='kargs="vzt debug "' --service='rome'
| |
| − | </pre>
| |
| − | ==== To deploy PSBM via tssetup-psbm ====
| |
| − | <pre>
| |
| − | wget http://repo/pub/vzt-tools/tssetup-psbm
| |
| − | python tssetup-psbm --label ps/527-3.0.5368.407751 --kargs=vzt -r
| |
| − | </pre>
| |
| − | {{Note2|If python 2.5.2 is installed on win node, both with parallels-virtualization-sdk and '''prlsdkapi still can't be imported''', then copy ''prlsdkapi'' folder from ''C:\Python\Lib\site-packages\'' to ''C:\Python25\Lib\site-packages''.}}
| |
| − | ==== To start/stop VM and check the time ====
| |
| − | <pre>
| |
| − | # while :; do time prlctl start "{7afcbfe5-c92d-4398-9c70-44ac35077c05}" && time prlctl stop VM_7afcbfe5 --fast || break; done
| |
| − | # while :; do prlctl set "{7afcbfe5-c92d-4398-9c70-44ac35077c05}" --mac "auto" --device-set "net1"; time prlctl start
| |
| − | "{7afcbfe5-c92d-4398-9c70-44ac35077c05}" && time prlctl stop VM_7afcbfe5 --fast || break; done
| |
| − | </pre>
| |
| − | | |
| − | ==== To check if weekly report yaml is formatted properly ====
| |
| − | <pre>
| |
| − | # PYTHONPATH=/home/shams/tests/vztlib/lib/
| |
| − | # python -c 'import yaml, pprint; pprint.pprint(yaml.load(open("shams-5Jun.yaml")))'
| |
| − | In case of mistakes there will be long parser output and something like:
| |
| − | # yaml.scanner.ScannerError: while scanning a simple key
| |
| − | in "shams-5Jun.yaml", line 39, column 3
| |
| − | could not found expected ':'
| |
| − | in "shams-5Jun.yaml", line 40, column 3
| |
| − | </pre>
| |
| − | To execute test in cycle until it passes out (means manual test installing/unpacking/executing):
| |
| − | <pre>
| |
| − | # a=0; while [ $? -eq 0 ]; do a=$(($a+1)); echo 'TEST RUN: ' $a; vzt-pxe/bin/vzt-pxe;done
| |
| − | </pre>
| |
| − | | |
| − | ==== launchctl: macosx processes ====
| |
| − | ===== dispatcher restart =====
| |
| − | <pre>
| |
| − | sudo launchctl stop com.parallels.server.launchdaemon
| |
| − | sudo launchctl start com.parallels.server.launchdaemon
| |
| − | </pre>
| |
| − | ==== to enable net boot for old school servers ====
| |
| − | Actually ''Legacy LAN'' in BIOS boot options is a fake. To enable true netboot, go to ''Integrated Peripherals -> Onboard Devices'' and set 'Enabled' for ''Onboard Lan device''. Save and exit, on the next reboot go there again and specify the device correctly.
| |
| − | | |
| − | ==== to create a stand-alone VM using setupvm ====
| |
| − | <pre>
| |
| − | # curl http://testrepo/pub/vzt/setupvm.tar.bz2 | tar -xjvf -
| |
| − | # python setupvm/00main.py execute -- --prl-template install:win_2k8_srv_dtc_r2_x86_64 --vt plsctl
| |
| − | </pre>
| |
| − | {{Note2|You need to specify the template name exactly as in vztlib/lib/vztests/os_install/config.py}}
| |
| − | | |
| − | ==== to remove VMs in cycle ====
| |
| − | ===== Win hosts =====
| |
| − | <pre>
| |
| − | C:\Users\Administrator>for /f %v in ('prlctl list -a -H -o name') do prlctl destroy %v
| |
| − | </pre>
| |
| − | ===== Lin/Mac hosts =====
| |
| − | <pre>
| |
| − | # for i in $(prlctl list -a -H -o name); do prlctl destroy $i; done
| |
| − | </pre>
| |
| − | ==== code coverage hints and tips ====
| |
| − | * If scheduled test fails and doesn't export the results, before doing it manually please '''move all the coverage data''' from ''/var/tmp/--Build-Tmp--/pdfm-mac-something/'' to test work directory.
| |
| − | {{Fixme|there's a script which does all the moving job, so place the link here}}
| |
| − | {{Fixme|also a couple of words about extracting coverage data and forming html won't hurt; it's a script also, dkomkov@ knows the pain}}
| |
| − | | |
| − | ==== install license for Parallels products via cmd ====
| |
| − | <pre>
| |
| − | mac16:~ root# prlsrvctl install-license --key RM3QZY-HDR34G-FN3FQR-QILKS8-54RGVB
| |
| − | The license has been successfully installed.
| |
| − | </pre>
| |
| − | | |
| − | ==== OS ISOs locations ====
| |
| − | 1. Those which are used in automated tests: ''vztlib/lib/vztests/os_install/config.py''
| |
| − | 2. Those which are used in manual testing: [http://wiki/ISOs|list on wiki]
| |
| − | | |
| − | ==== OS install on the fly using vzt-sample ====
| |
| − | {{Note2|Proper OS names are specified in vztlib/lib/vztests/os_install/config.py}}
| |
| − | <pre>
| |
| − | $ curl http://testrepo/pub/vzt/vzt-sample.tar.bz2 | tar -xjvf -
| |
| − | $ python vzt-sample/bin/vzt-sample --prl-template install:win_7_x86_64 --prl-tools --prl-cpus $cpu_num -D 4 -L --ts $test_server
| |
| − | </pre>
| |
| − | | |
| − | === mounting samba shares ===
| |
| − | ==== on Linux ====
| |
| − | <pre>
| |
| − | sudo mount -t cifs -o guest,file_mode=0644,dir_mode=0755,nocase,noacl,noperm,nosfu,noserverino,nosetuids,nouser_xattr
| |
| − | //mir/incoming /home/shams/mnt/mir/
| |
| − | </pre>
| |
| − | | |
| − | ==== on Windows ====
| |
| − | This is pretty convenient for storing big dumps on racoon. Let me tell you this:
| |
| − | <ol><li> If you've got a VM in BSOD, then it's pretty hard to get its dump from ''C:\Windows\Memory.dmp''. You can create another VM on the same server (create a dir, get a VM tarball, unpack it and ''prlctl register dir''), add a HDD (existing image, that of broken VM) to this new VM in ''Configure''.
| |
| − | <li> IE -> Tools -> Map Network Drive (alternative: Computer -> Properties -> Map Network Drive </li>
| |
| − | <li> Any letter of drive is acceptable </li>
| |
| − | <li> Folder is in form ''\\racoon\Memory.Dmps\''</li>
| |
| − | <li> Uncheck ''Reconnect as logon'' check-box </li>
| |
| − | <li> Different user name: swsoft/onovaselskaya: passwd </li>
| |
| − | <li> Now it's possible simply drag'n'drop the dump from ''E:\Windows\'' to the bug folder on ''racoon''</li></ol>
| |
| − | {{Note2|If the file is located in C:\Users\Administrator\, then you simply can copy specifying only the name of this file}}
| |
| − | <pre>
| |
| − | scp -P 302 root@ts68.qa:Memory.dmp .
| |
| − | The authenticity of host '[ts68]:302 ([10.29.252.60]:302)' can't be established.
| |
| − | DSA key fingerprint is e9:6c:1a:cc:95:56:84:f8:04:7a:58:1f:e6:bd:19:5d.
| |
| − | Are you sure you want to continue connecting (yes/no)? yes
| |
| − | Warning: Permanently added '[ts68]:302,[10.29.252.60]:302' (DSA) to the list of known hosts.
| |
| − | root@ts68.qa's password:
| |
| − | Memory.dmp 100% 432MB 10.5MB/s 00:41
| |
| − | </pre>
| |
| − | | |
| − | === to burn something on CD ===
| |
| − | * you can insert a CD and copy an image:
| |
| − | <pre>
| |
| − | $ cat /dev/cdrom > file #name the file
| |
| − | </pre>
| |
| − | or it's possible to do it the other way:
| |
| − | <pre>
| |
| − | $ dd if=/dev/cdrom of=file #name the file
| |
| − | </pre>
| |
| − | * you can also mount the .iso file:
| |
| − | <pre>
| |
| − | #if you're not root:
| |
| − | $ fuseiso file (what) dir (to where)
| |
| − | # if you're root:
| |
| − | # mount -o loop file (what) dir (to where)
| |
| − | # to unmount:
| |
| − | $ fusermount -
| |
| − | </pre>
| |
| − | * or you can copy .iso from mir to your local machine
| |
| − | * burn a CD (perhaps you'll need to specify a lesser speed for some images):
| |
| − | <pre>
| |
| − | $ cdrecord -v -eject -speed 12 file
| |
| − | </pre>
| |
| − | {{Warning2|You need to specify speed 4 for DVDs. Also you might want to try speed 8 for CDs.}}
| |
| − | | |
| − | === If repo lacks some packages ===
| |
| − | Sometimes repo lacks some packages and that's why they cannot be installed into a VM. We can upload those packages to repo from some other repositories ( [http://repo/download/mirrors/ yandex mirror] seems to be a good place to start) and then re-create repodata (note that ''createrepo'' command is executed inside directory where ''repodata/'' is).
| |
| − | | |
| − | In this example we lack the package ''libusb-devel'' for fedora-10-x86_64.
| |
| − | <ol>
| |
| − | <li> Download the package from [http://mirror.yandex.ru/fedora/linux/releases/10/Everything/x86_64/os/Packages/ fedora mirror on yandex]. Note2 that it's not in ''os'' but in ''Everything'' repo.
| |
| − | <li> Upload it to proper ''Packages'' directory on repo:
| |
| − | <pre>
| |
| − | $ scp libusb-devel-*.fc10.x86_64.rpm x@repo:/var/www/html/pub/fedora/linux/releases/10/Fedora/x86_64/os/Packages/
| |
| − | </pre>
| |
| − | <li> re-create repodata (once again, inside directory with ''repodata/'':
| |
| − | <pre>
| |
| − | @repo Packages]$ createrepo .
| |
| − | 2814/2814 - libusb-devel-0.1.12-20.fc10.x86_64.rpm
| |
| − | Saving Primary metadata
| |
| − | Saving file lists metadata
| |
| − | Saving other metadata
| |
| − | </pre>
| |
| − | <li> if you tried ''yum install'' command before and failed because the package was missed, we need to clean yum metadata to be able to install package from renewed repo:
| |
| − | <pre>
| |
| − | $ yum clean all
| |
| − | </pre>
| |
| − | <li> yum search (to make sure package is in the right place and problem is fixed):
| |
| − | <pre>
| |
| − | $ yum search libusb-devel
| |
| − | ========= Matched: libusb-devel ===============================================
| |
| − | libusb-devel.i386 : Development files for libusb.
| |
| − | libusb-devel.x86_64 : Development files for libusb.
| |
| − | $ yum install libusb-devel
| |
| − | ...
| |
| − | Installed: libusb-devel.x86_64 0:0.1.12-5.1 libusb-devel.i386 0:0.1.12-5.1
| |
| − | Dependency Installed: pkgconfig.x86_64 1:0.21-2.el5
| |
| − | Complete!
| |
| − | </pre>
| |
| − | </ol>
| |
| − | | |
| − | === robot.py hints and tips ===
| |
| − | ==== create a job ====
| |
| − | python robot.py create_job --file="stm/mac24-vzt-pss-win-fixed-vm-num" --name="vzt-pss-win-fixed-vm-num" --url="http://testrepo/pub/vzt/vzt-pss.tar.bz2" --cmd="python vzt-pss/00main.py execute --shortcut fixednum -- --prl-template w2k3-ent-sp2-x86/default --min-mem=192 --max-mem=8192 --vm-num 4 -D4 --title vzt-pss-win-fixed-vm-num" --host="8140"
| |
| − | {{Note2|You need to specify server ''ID (inventory number registered on rome)'' in ''--host'' option}}
| |
| − | | |
| − | ==== jobs ====
| |
| − | ===== to replace something in the titles =====
| |
| − | <pre>
| |
| − | $ for F in *snowleo*; do NF=$(echo $F | sed 's/snowleo/snow-leo/'); mv $F $NF; done
| |
| − | $ grep -F 'cpu.total>=2' * -l | xargs sed -i 's./cpu\.total>=2/cpu.total>1/'
| |
| − | </pre>
| |
| − | Actually you can use any symbol to part instead of '/'. In case it's used in expression you want to edit, use '@' or something else.
| |
| − | | |
| − | ===== to replace something in job lines =====
| |
| − | <pre>
| |
| − | $ grep -i server_opts *
| |
| − | vzt-vm-install-stw-AMD64-hvt.py: server_opts = "cpu.arch='x86_64'")
| |
| − | vzt-vm-install-stw-Intel32-hvt.py: server_opts = "",
| |
| − | vzt-vm-install-stw-Intel32-sd.py: server_opts = "",
| |
| − | vzt-vm-install-stw-Intel32-ska.py: server_opts = "",
| |
| − | vzt-vm-install-stw-Intel64-hvt.py: server_opts = "cpu.arch='x86_64'")
| |
| − | <pre>
| |
| − | # or it's possible to search exact strings in exact files and write a cycle
| |
| − | $ fgrep -l 'server_opts = ""' *
| |
| − | $ for f in $(fgrep -l 'server_opts = ""' *); do sed -i '/server_opts = ""/d' $f; done
| |
| − | </pre>
| |
| − | one more example:
| |
| − | <pre>
| |
| − | $ for f in $(fgrep -l "opts.get('server_opts')" *); do sed -i "s/opts.get('server_opts')/opts.get('server_opts', '')/g" $f; done
| |
| − | </pre>
| |
| − | or it's possible to look for pattern and fix it in multiple lines:
| |
| − | <pre>
| |
| − | $ sed -i "s/x86_64'\&/x86_64'/g" *-stw-AMD*
| |
| − | </pre>
| |
| − | another sed intercourse:
| |
| − | <pre>
| |
| − | # for f in $(fgrep -l "cpu.model?intel" *); do sed -i 's/&cpu.model?intel//g' $f; done
| |
| − | </pre>
| |
| − | * to check if search strings are valid:
| |
| − | <pre>
| |
| − | python
| |
| − | >>> import xmlrpclib
| |
| − | >>> s = xmlrpclib.ServerProxy('http://rome/xmlrpc/deploy.rem')
| |
| − | >>> s.servers.filter('') # if there's one given server
| |
| − | >>> s.servers.filterEx(['server0', 'server1'], "server0.nodes.name=server1.nodes.name") # if there's a massive of servers
| |
| − | # perhaps it's '''server0.name''' not '''server0.nodes.name'''
| |
| − | </pre>
| |
| − | ====== to find jobs inconsistencies ======
| |
| − | * to find ones:
| |
| − | <pre>
| |
| − | shams@shams pls-jobs$ for f in *.py; do python $f; done
| |
| − | shams@shams tps$ cat pd-regular-extended | wc
| |
| − | 148 148 4636
| |
| − | </pre>
| |
| − | * to test a new job on a given server(s) (in this case both client and master servers are specified):
| |
| − | <pre>
| |
| − | $ python robot.py schedule --product='Parallels Desktop 5' --builds='5.0.9278.533221' --runlist-path=../jobs/pls-jobs/runlist
| |
| − | --jobdir=../jobs/pls-jobs/ --owner='user@domain.com' --host-pool-search="nodes.inv_no=8137|nodes.inv_no=8216"
| |
| − | </pre>
| |
| − | {{Warning2|When specifying a host ID in ''<nowiki>nodes.inv_no=xxxx</nowiki>'', do not use quotes, because inv_no is a NUMBER, not a STRING}}
| |
| − | {{Note2|Please, create patches with option -M, when you rename some files}}
| |
| − | * when using runlist, do not forget to place it in pls-jobs directory:
| |
| − | <pre>
| |
| − | python robot.py schedule --product='Parallels Desktop 5' --builds='5.0.9303.541720' \
| |
| − | --runlist-path=../jobs/pls-jobs/runlist --jobdir=../jobs/pls-jobs/ --owner='user@domain.com' \
| |
| − | --host-pool-search="location_owner.department='PD at'" --enable-state-mgmt='1' --no-qainv='1'
| |
| − | </pre>
| |
| − | * Default build window is 20. You can specify another window (--window). If you want to specify build and then run tests on it and all the following builds, use ''--builds='x.x.xxxx.xxxxxx''' and build notification (''--listen-addr='x.x.x.x''' with IP of server where robot is running):
| |
| − | <pre>
| |
| − | python robot.py schedule --product='Parallels Desktop 5' --builds='5.0.9077.527148' --listen-addr='10.30.1.27'
| |
| − | --testplan-name='pd-regular-extended' --jobdir-path='../jobs/pls-jobs/' --owner='user@domain.com'
| |
| − | --host-pool-search="location_owner.department='PD at'"
| |
| − | </pre>
| |
| − | * If there are some runs on old builds, you want to execute tests on new one, but consider the tests executed on old ones, too, then you need to specify all the builds in a manner '''--builds='x.x.old.build''' ''--builds='x.x.another.old.build''' '''--builds='x.x.new.build'''
| |
| − | * If there's a need to execute one or several jobs on a given man, it's possible to use '''--runlist-path''' option (it includes only test titles, not options like it was in run.py) and '''--host-pool-search="nodes.inv_no=ID'":
| |
| − | <pre>
| |
| − | $ python robot.py schedule --product='Parallels Desktop 5' --builds='5.0.9142.528763' --runlist-path='../../logs/usbcv-sample'
| |
| − | --jobdir-path='/home/shams/prltests/logs/usb-jobs/' --owner='user@domain.com'
| |
| − | --host-pool-search="nodes.inv_no='8137'"
| |
| − | </pre>
| |
| − | {{Warning2|As long as EPAM uses the same jobs for PSfM as we do for PD but prior guests are different (w2k3 / winxp) there's a quick fix to test the bloody XP in start/stops}}
| |
| − | <pre>
| |
| − | $ for f in $(fgrep -l 'w2k3-ent-sp2-x86' * | grep vzt_pss | grep i386); do sed -i "s/w2k3-ent-sp2-x86/winxp-sp3-i386/g" $f; done
| |
| − | $ for f in $(fgrep -l 'w2k3-ent-sp2-x86_64' * | grep vzt_pss | grep x86_64); do sed -i "s/w2k3-ent-sp2-x86_64/winxp-sp2-x86_64/g" $f; done
| |
| − | </pre>
| |
| − | | |
| − | ===== to add a line before pattern line =====
| |
| − | <pre><nowiki>
| |
| − | $ for f in vzt_usb*py; do sed -i '/nodes.type<8/i\\t# FIXME: this search string is to workaround bug #460648; \
| |
| − | replace with Mac type number' $f; done
| |
| − | </nowiki></pre>
| |
| − | * scheduling for UTW7:
| |
| − | <pre>
| |
| − | $ python robot.py schedule --product='Parallels Desktop UTW7' --builds='5.0.10714.546622' --testplan-name='utw7-Intel'
| |
| − | --listen-to-addr='10.30.1.27' --enable-state-mgmt='1'
| |
| − | --jobdir=../jobs/pls-jobs/ --owner='user@domain.com' --host-pool-search="location_owner.department='PDUtW7-Intel'"
| |
| − | </pre>
| |
| − | ===== Farm constraints fixes =====
| |
| − | * to limit host search (farm constraints) in ''robot/jobs/pls-jobs/configure.py'':
| |
| − | <pre>
| |
| − | job.farm_constraints(
| |
| − | str(client) + '.link.other=' + \
| |
| − | str(server) + '.nodes.inv_no&' + \
| |
| − | str(client) + '.link.type=3&' + \
| |
| − | str(server) + ".cpu.arch?'%intel%'")
| |
| − | </pre>
| |
| − | * to limit host search (farm constraints) for usb jobs, right in parent jobs:
| |
| − | <pre>
| |
| − | job.farm_constraints(
| |
| − | str(server) + ".link.other=" +
| |
| − | str(gadget) + ".nodes.inv_no&" +
| |
| − | str(server) + ".link.type=6&" + # 6 = USB server
| |
| − | str(server) + ".cpu.arch?'%intel%'"
| |
| − | )
| |
| − | </pre>
| |
| − | ===== Fake robot run =====
| |
| − | To emulate scheduler's work (fake robot run, with generating jobs and processing them, but no real server deployment) you need to edit robot/src/Scheduler.py. Comment a line <span style="background:#99ff99">id = self.deployJobWait(tp_current[i].title, job_doc)</span> instead of <span style="background:#ff9999">#id = None</span>. Once id is None, this is a fake run.
| |
| − | | |
| − | ==== problem-reports ====
| |
| − | {{Note2|At the moment UTW7 problem reports are stored in C:\Users\All Users\Parallels\Problem reports\.}}
| |
| − | * There are two ways to send problem reports:
| |
| − | * For a given VM (you need to specify VM ID in this case):
| |
| − | <pre>
| |
| − | # prlctl problem-report VM_ID --send
| |
| − | ### or you can redirect this output to the file to send later: prlctl problem-report VM_ID > problem-report.tar.gz
| |
| − | </pre>
| |
| − | * For the whole server, this will catch all the crashes and all the spoiled things for last 7 days:
| |
| − | <pre>
| |
| − | # prlsrvctl problem-report --send --stand-alone
| |
| − | </pre>
| |
| − | * If we've got a panic@, full path to detailed and mini dumps is specified in problem report in vm.log:
| |
| − | 19:33:11.753 F /vm:2232:9c/ CMonitorDumpBuilder::Create(C:/vz/vm/win_vista_sp2_x32-15-Feb-2010-19.07.06.pvm, 0, #14)<br>
| |
| − | 19:33:11.753 F /vm:2232:9c/ CMonitorDumpBuilder::Create() <span style="background:#99ff99">full
| |
| − | C:/vz/vm/win_vista_sp2_x32-15-Feb-2010-19.07.06.pvm/monitor.dmp, mini C:/vz/vm/win_vista_sp2_x32-15-Feb-2010-19.07.06.pvm/2010-02-15-193311.dmp</span>
| |
| − | * MonData has been changed a bit, thus we've got the error while using [http://repo/pub/vzt-tools/mem2cd.exe mem2cd.exe] to generate a dump:
| |
| − | <pre>
| |
| − | C:\Users\Administrator>mem2cd.exe vista-sp2-x32.mem MonData.txt vista-sp2-bsod.dmp
| |
| − | opening monitor data file "MonData.txt"
| |
| − | parse failure at "gdtr base 8167f000 limit 03ff
| |
| − | " against format "ES: sel %hx"
| |
| − | </pre>
| |
| − | To avoid this error (until mem2cd is fixed) you need to remove the following lines from the MonData.txt file:
| |
| − | <pre>
| |
| − | dr0 00000000
| |
| − | dr1 00000000
| |
| − | dr2 00000000
| |
| − | dr3 00000000
| |
| − | dr6 ffff0ff0
| |
| − | dr7 00000400
| |
| − | </pre>
| |
| − | ==== Generating dumps ====
| |
| − | * <span style="background:#8fcefa">Now it's possible to create memory dumps using product tools</span> (everyone hug Max Nestratov!):
| |
| − | <pre>
| |
| − | prlctl internal VMID dbgdump --file FILENAME --path DIRECTORY --wait TIMEOUT
| |
| − | </pre>
| |
| − | where:
| |
| − | <ul>
| |
| − | <li>'''VMID''' is (surprise!) VM ID.</li>
| |
| − | <li>'''FILENAME''' is a name of generated dump (it's ''memory.dmp'' by default)</li>
| |
| − | <li>'''DIRECTORY''' is a ''full'' path to directory with a dump (it's VM home directory by default)</li>
| |
| − | <li>'''TIMEOUT''' lets you to specify (in seconds) how long the command will wait for a dump to be created (it's 60 sec by default)</li>
| |
| − | {{Warning2|Sometimes when VM is huge or the server is busy, you need to specify a bigger timeout than default one (which is 30 seconds! So use --wait option}}
| |
| − | {{Note2|If it's not possible to generate a dump (mem2cd.exe doesn't sync the data in other cases than BSOD and prlctl dump generator is not merged to some products), it's possible to add problem VM's hdd to another alive VM and get the dumps from this disk).}}
| |
| − | Some mind blowing insights about generating dumps are here: [http://wiki/index.php/Creating_new_bug]
| |
| − | | |
| − | ==== Performance counters ====
| |
| − | {{Fixme| Add meaningful details for perfcounters}}
| |
| − | If guest hangs after something happened inside him (like, guest OS hibernate), it's not bad idea to add perfcounters to the bug.
| |
| − | <pre>
| |
| − | C:\Users\Administrator>prl_perf_ctl -a -n -l 5
| |
| − | # prl_perf_ctl -a -l 10 -c vcpu
| |
| − | </pre>
| |
| − | [http://wiki/index.php/Performance_Counters]
| |
| − | | |
| − | ==== Uploading the whole VM to the storage ====
| |
| − | * If it's impossible to generate a report, it's worth to <span style="background:#8fcefa">save a VM somewhere</span> (for instance, on racoon). It's a pain to use scp/rdesktop, so (thanks to nadyak@) you can access racoon right from the test server (use your domain credentials):
| |
| − | <pre>
| |
| − | C:\Users\Administrator>net use Y: \\racoon\Memory.Dmps /user:USER
| |
| − | Enter the password for 'USER' to connect to 'racoon'
| |
| − | The command completed successfully.
| |
| − | </pre>
| |
| − | Then create a directory on ''Y:'' (there's a policy: every dir should be a bug number without ''#'') and copy there whatever you want:
| |
| − | <pre>
| |
| − | C:\Users\Administrator>copy win_vista_sp2_x32.pvm Y:\473518\
| |
| − | win_vista_sp2_x32.pvm\2010-04-22-024551.dmp
| |
| − | win_vista_sp2_x32.pvm\2010-04-22-030830.dmp
| |
| − | win_vista_sp2_x32.pvm\config.pvs
| |
| − | </pre>
| |
| − | * bugzilla template on 'how to reproduce a bug' including automated test run:
| |
| − | On '''Win''' hosts:
| |
| − | <pre>
| |
| − | 1. Download test tarball (http://testrepo.qa/pub/vzt/vzt-pgov.tar.bz2) to C:\ and uncompress it.
| |
| − | 2. python C:\vzt-pgov\vzt-pgov\bin\vzt-pgov --plssdk --prl-cpus 1 --timeout 7000 --prl-vmm 32 --testset
| |
| − | stw-x32 -L -D4 --title=vzt-pgov-stw-up-Intel32-hvt
| |
| − | 3. python C:\vzt-pgov\vztlib\lib\vztests\export_results.py -d C:\vzt-pgov\vzt-pgov\work\ (to export
| |
| − | results).
| |
| − | </pre>
| |
| − | On '''Lin/Mac''' hosts:
| |
| − | {{Fixme|Add strings for Lin/Mac hosts: curl/tar/python + results}}
| |
| − | * SDK related stuff:
| |
| − | <pre>
| |
| − | mac33:~ root# python
| |
| − | Python 2.5.4 (r254:67916, Feb 11 2010, 00:50:55)
| |
| − | [GCC 4.2.1 (Apple Inc. build 5646)] on darwin
| |
| − | Type "help", "copyright", "credits" or "license" for more information.
| |
| − | >>> import prlsdkapi
| |
| − | >>> prlsdkapi.init_desktop_sdk()
| |
| − | >>> s = prlsdkapi.Server()
| |
| − | >>> s.login_local()
| |
| − | <prlsdkapi.Job object at 0x19aeb0>
| |
| − | >>> s.login_local().wait()
| |
| − | <prlsdkapi.Result object at 0x19f430>
| |
| − | </pre>
| |
| − | | |
| − | ==== git ====
| |
| − | * If you've got series of committed patches, format and send them as a pack:
| |
| − | <pre>
| |
| − | $ git format-patch -3 -n --thread
| |
| − | $ git-send-email --to bla@bla --cc bla@bla --cc bla@bla --dry-run 000*
| |
| − | #to check if things are OK before sending then remove --dry-run
| |
| − | </pre>
| |
| − | * If you fed up to your ears with serial numbers on patches, you can omit numerating. By default, the subject of a single patch is
| |
| − | <pre>
| |
| − | "[PATCH] First Line" and
| |
| − | the subject when multiple patches are output is "[PATCH n/m] First
| |
| − | Line". To force 1/1 to be added for a single patch, use -n. To omit
| |
| − | patch numbers from the subject, use -N.
| |
| − | </pre>
| |
| − | * Colors in git-log:
| |
| − | <pre>
| |
| − | $ GIT_PAGER="vim -R -" git log origin.. -p
| |
| − | </pre>
| |
| − | * to apply a patch sent but not committed yet:
| |
| − | <ol>
| |
| − | <li> vzt-patch -> save the patch as some.eml
| |
| − | <li> go to git directory
| |
| − | <li> apply the patching using ''git-am'' command (stands for git apply message):
| |
| − | <pre>
| |
| − | $ git-am ~/prltests/logs/piglit/piglit-separator-patch.eml
| |
| − | Applying: vzt_prep: added check for path separator at the end to name processing
| |
| − | b866e70557a29e7b4123ecaf801e419f7d7fd116
| |
| − | </pre>
| |
| − | <li> if you've got several different groups of files you want to commit independently, it's worth to use ''git-add'' for one group, then ''git-commit'', then to do the same for another group.</li></ol>
| |
| − | * To fix things in already committed patch (it's not on the top of the log):
| |
| − | <pre>
| |
| − | ~ git-log ; to get the commit ID
| |
| − | ~ git rebase -i commit-ID-long-series-of-letters-and-numbers^ ; 'edit' commit; wq
| |
| − | ~ vim file-included-in-commit
| |
| − | ~ git add file-included-in-commit
| |
| − | ~ git commit --amend
| |
| − | ~ git rebase --continue
| |
| − | ~ git format-patch -N origin
| |
| − | ~ git send-email --to --cc patch-fixed
| |
| − | </pre>
| |
| − | * To fix things in already committed patch (it's on top of the log):
| |
| − | <pre>
| |
| − | ~ git log origin..HEAD ; to make sure it's really on top
| |
| − | ~ vim file-included-in-commit
| |
| − | ~ git commit -a --amend ; to merge new changes with the old patch
| |
| − | ~ git format-patch -N origin
| |
| − | ~ git send-email --to --cc patch-fixed
| |
| − | </pre>
| |
| − | | |
| − | ==== vzt-results test runs queries ====
| |
| − | * '''title''' (this was from the beginning):
| |
| − | <pre>
| |
| − | title.title like 'vzt-pss-stress'
| |
| − | title.title like 'vzt-pss-fixed%num%rhel%'
| |
| − | </pre>
| |
| − | * '''hostname''' (just like the corresponding field on prlcov):
| |
| − | <pre>
| |
| − | hardware.hostname='mac28'
| |
| − | </pre>
| |
| − | * '''other hardware details''' (like cpu, cores, cpu vendor):
| |
| − | <pre>
| |
| − | hardware.cpus_vendor=''
| |
| − | hardware.cpus_family=''
| |
| − | hardware.cpus_count='4'
| |
| − | hardware.cpus_cores='8'
| |
| − | hardware.mem_size=''
| |
| − | hardware.cpus_flags=''
| |
| − | </pre>
| |
| − | * '''product''' (like the corresponding field on prlcov):
| |
| − | <pre>
| |
| − | product_name.name='parallels-desktop' (or 'psbm' etc.)
| |
| − | Possible search strings for test title and product looks somewhat like:
| |
| − | title.title like 'vzt-parallels-snapshots-smp%' and product_name.name='parallels-desktop'
| |
| − | </pre>
| |
| − | * '''build''' (like in corresponding field on prlcov):
| |
| − | <pre>
| |
| − | product_name.name='parallels-desktop' and
| |
| − | product.version='5.0.9046.448229' (for psbm you need to specify it like
| |
| − | '3.0.0-640')
| |
| − | </pre>
| |
| − | * '''invalid runs''':
| |
| − | <pre>
| |
| − | invalid=1
| |
| − | </pre>
| |
| − | | |
| − | ==== rome server search queries ====
| |
| − | New version of web client installed on rome together with updated client app and service ifself. It’s now possible to query(apply filter) on servers both from web client and stand-alone client. Query syntax is the same as in previous version except that new operator ‘?’ has been added. It’s used to search for substrings.
| |
| − | <span style="background:#99ff99">Sample: “nodes.name?test”</span> will find you all servers where name contain “test” substring.
| |
| − | <span style="background:#99ff99">Sample: “cpu.arch=’i386’&net.driver=’e1000’”</span> will find you all severs with i386 and Intel’s Gb Ethernet nics.
| |
| − | Here is a list of what you can search right now:
| |
| − | <pre>
| |
| − | nodes.inv_no,
| |
| − | nodes.name,
| |
| − | nodes.dirty,
| |
| − | nodes.online,
| |
| − | cpu.arch,
| |
| − | cpu.dev,
| |
| − | cpu.core,
| |
| − | cpu.ht,
| |
| − | cpu.total,
| |
| − | cpu.speed,
| |
| − | cpu.model,
| |
| − | cpu.vtd,
| |
| − | сpu.npt, (rvi on amd/ept on intel)
| |
| − | net.mac,
| |
| − | net.driver,
| |
| − | net.speed,
| |
| − | net.ip,
| |
| − | net.mask,
| |
| − | net.mac,
| |
| − | net.ext,
| |
| − | net.basic,
| |
| − | net.port,
| |
| − | disks.drive,
| |
| − | disks.size,
| |
| − | mem.type,
| |
| − | mem.size,
| |
| − | mem.speed,
| |
| − | install_state.image_id,
| |
| − | install_state.os_id,
| |
| − | images.name,
| |
| − | images.os_id,
| |
| − | os_list.name,
| |
| − | os_list.type,
| |
| − | os_list.major,
| |
| − | os_list.minor,
| |
| − | location_owner.owner,
| |
| − | location_owner.department,
| |
| − | location_owner.comments,
| |
| − | location_owner.location,
| |
| − | serial_consoles.dev_num,
| |
| − | serial_consoles.speed,
| |
| − | serial_consoles.state
| |
| − | </pre>
| |
| − | | |
| − | === ToDO ===
| |
| − | * script to check if nodes are plugged to conman and are writing to console logs
| |
| − | {{Fixme|Add meaningful details}}
| |
| − | (07:05:38 PM) shams: оно же покорраптит кусок кода
| |
| − | а ещё можно запихать его в VIM и сделать там :TOhtml
| |
| − | в новом окне появляется тот код, отформатированный в HTML
| |
| − | начиная с тега следующего после body
| |
| − | если не расцветил, надо сказать :set filetype=diff (где код), а не HTML кусок
| |
| − | Поубирать [br], если стоит галочка autoformatting
| |
