Kernel build

This FAQ will help you in case you want to apply some patches to the kernel on your own or rebuild it from sources. On RPM based distros such as RedHat Enterprise Linux/CentOS, Fedora Core or SUSE one can simpy rebuild kernel from SRPM. For other distros it is required to install sources, build and install kernel manually. The below are given the details for both cases.

Rebuilding kernel from SRPM

Download

Source RPMS for different OpenVZ kernel branches can be downloaded from http://openvz.org/download/kernel/. You can also access http://download.openvz.org/kernel/ directly, or use one of the mirrors.

Installation

Install the downloaded SRC RPM with the following command:

# rpm -ihv ovzkernel-2.6.16-026test014.4.src.rpm

After successfull installation, you can usually find kernel sources in /usr/src/<distro>/SOURCES/ and kernel spec file (kernel-ovz.spec) in /usr/src/<distro>/SPECS, where <distro> is your distribution-specific directory. For example, for Red Hat based distros it is redhat, for SUSE it is packages.

Adding your own patches

To modify the kernel one needs just to add specific patches to the kernel spec file and put this patch into SOURCES directory.

Put your patch into SOURCES directory with the following command:

# cp <patch> /usr/src/<distro>/SOURCES/

Then open spec file /usr/src/<distro>/SPECS/kernel-ovz.spec in the editor and add the following lines:

Patch10000: <patch-name>

and

%patch10000 -p1

in appropriate places where similar text lines are.

Building RPMs

Before rebuilding the kernel make sure that you adjusted the kernel version in kernel-ovz.spec. This will help you to distinguish binaries then from already existing kernels (or from the official OpenVZ kernels). To do so, edit the /usr/src/<distro>/SPECS/kernel-ovz.spec file and replace the following line:

%define ksubrelease 1

with something like

%define ksubrelease 1-my.kernel.v1

To rebuild the kernel, type the following commands:

# cd /usr/src/<distro>/SPECS
# rpmbuild -ba --target=i686 kernel-ovz.spec

After successfull kernel compilation binary RPMs can be found at /usr/src/<distro>/RPMS/i686.

Rebuilding kernel from sources

Download

To compile OpenVZ linux kernel one need to download the original linux kernel sources and OpenVZ patches for it.

Linux kernel can be found at kernel.org, e.g. 2.6.16 kernel can be downloaded from linux-2.6.16.tar.bz2.

Appropriate OpenVZ patches for this kernel version can be found at http://openvz.org/download/kernel/. For example, at the moment there is a patch patch-026test014-combined.gz available.

Kernel configs are also available at OpenVZ download site. Most frequently SMP config is used, so let's download kernel-2.6.16-026test014-i686-smp.config.ovz for this example.

Building

First, extract the kernel sources from archive:

# tar vjxf linux-2.6.16.tar.bz2
# cd linux-2.6.16

Apply OpenVZ patches to the kernel:

# gzip -dc patch-026test014-combined.gz | patch -p1

Now we need to place the config and build the kernel:

# cp kernel-2.6.16-026test014-i686-smp.config.ovz .config
# make oldconfig
# make
# make modules

Installation

After successfull build of kernel it can be installed on the machine with the following commands run under root user:

# make install
# make modules_install

Also you need to edit your GRUB or LILO config to make your kernel available for boot.