Virtual network device

Vitual network device (venet) is the default network device for VE. This network device looks like a ppp connection between VE and host system. It does packet switching based on IP header.

venet is created automatically on VE start. vzctl scripts setup appropriate IP and settings on venet inside VPS.

Contents

Virtual network device usage

Adding IP address to a VE

vzctl set <VEID> --ipadd <IP1>[,<IP2>,...] [--save]

Note: This option is incremental, so IP addresses are added to already existing ones.

Example

vzctl set 101 --ipadd 10.0.0.1 --save

After executing this command IP address 10.0.0.1 will be added to VE 101 and IP configuration will be saved to a VE configuration file.

Removing IP address from a VE

vzctl set <VEID> --ipdel <IP1>[,<IP2>,...] [--save]
vzctl set <VEID> --ipdel all [--save]

Example

vzctl set 101 --ipadd 10.0.0.1

After executing this command IP address 10.0.0.1 will be removed from VE 101, but IP configuration will not be changed in VE config file. And after VE reboot IP address 10.0.0.1 will be assigned to this VE again.