Oracle9i in SLES9 container
This small HOWTO is to help people to install Oracle 9i in SLES9-SP2 VE. Installation of Oracle is quite a complicated procedure and actually has little to do anything with VE or OpenVZ virtualization, but is frequently asked about.
Installation of other Oracle versions in other VE OS can differ and should be decribed in separate Wiki pages.
Inside host system (VE0)
First, create and cache SLES9 x8664. You will need to install gcc, binutils and other packages required by Oracle either in SLES9 cache or alter directly inside the VE.
Create VE based on latest SLES9 x8664 template:
vzctl create $CTID --ostemplate sles-9-x86_64
Assign some IP address to the VE:
vzctl set $CTID --ipadd $VE_IP_ADDRESS --save
Setup nameserver inside VE (/etc/resolv.conf):
vzctl set $CTID --nameserver $DNS_IP
Set enough resource limits inside VE (in this example ~2GB RAM):
vzctl set $CTID --save --applyconfig vps.2048MB
Set enough disk space for the VE (e.g. to 15GB):
vzctl set $CTID --save --diskspace 15000000
Inside VE
All the following instructions are not OpenVZ/Virtuozzo specific and mostly taken as is from the official SUSE guide
Login to VE and do the following:
Run yast and setup SLES9 repository or SLES9 CDs local repository, then install following packages:
- glibc-devel-32bit - pdksh - libaio - libaio-devel
Now install "orarun" package from SLES9 SP2 CD2. You can use YaST setup tool or manual installation instruction to install orarun package.
After orarun package is installed enable 'oracle' user:
usermod -s /bin/bash oracle
Specify password for 'oracle' user
passwd oracle
Run rcoracle script to set kernel parameters. Ignore any errors.
/usr/sbin/rcoracle start
Create link for libdb library:
ln -s /usr/lib/libdb.so.3 /usr/lib/libdb.so.2
Setup graphical access to VE via ssh or via vnc, at your choice:
- For access via ssh:
- Change X11Forwarding in /etc/ssh/sshd_config to 'yes' inside VE
- Restart sshd inside VE (/etc/init.d/sshd restart)
- Login to VE via ssh with '-X' option (run this command from your host):
ssh -X oracle@$VE_ADDRESS
- For access via VNC, do inside VE:
- Install XFree86, XFree86-Vnc packages inside VE
- Login to VE as 'oracle' (run this command from your host):
ssh oracle@$VE_ADDRESS
- start VNC server:
Xvnc :0 &
- set DISPLAY environment variable:
export DISPLAY=:0
- From your host attach to vnc screen (run this command from your host):
vncviewer $VE_ADDRESS:0
NOTE: this may require to use vncviewer from SLES9 OS, since newer vncviewer's are not compatible with it.
Now, as 'oracle' user inside VE:
Get Oracle 9iR2 (9204) Software from oracle web or use your Oracle Disks. If you have downloaded SW then gunzip and cpio files.
gunzip $file_name cpio command: cpio -idmv < file_name
It will create three directory Disk1, Disk2 and Disk3.
Finally start oracle installer (under oracle user):
Disk1/runInstaller
and carefully follow installation instructions.
After the installation succeeds oracle automaticaly runs a created by default database instance, so you can use sqlplus to test it.
NOTE: Oracle 9i installation on SLES9 is tricky and requires a lot of steps
and workarounds described in official papers and in the internet. The following links may be helpful.