Open main menu

OpenVZ Virtuozzo Containers Wiki β

Compiling the OpenVZ kernel (the Debian way)

Contents

Lenny and aboveEdit

Debian Lenny already includes an openvz kernel (linux-image-${version}-openvz-${arch}), so the manual compilation is not necessary in many cases.

Installing sourcesEdit

On Etch, to install the kernel-source and the OpenVZ kernel patch, run: 

# apt-get install kernel-package linux-source-2.6.18 kernel-patch-openvz libncurses5-dev

For Lenny running kernels before 2.6.29 run the following: 

# apt-get install kernel-package linux-source-2.6.18 linux-patch-openvz libncurses5-dev

Since kernel 2.6.29 the patch is now included in Debian kernel source. Run only the following and ignore references to the patch further down this page: 

# apt-get install kernel-package linux-source-2.6 libncurses5-dev

UnpackingEdit

Unpack the kernel source: 

 # cd /usr/src
 # tar xjf linux-source-2.6.18.tar.bz2
 # cd linux-source-2.6.18

Kernel configEdit

You need a kernel config. You can use the config of the debian-kernel: 

# cp /boot/config-2.6.18-5-686 .config

Or get a 2.6.18 kernel configuration from http://download.openvz.org/kernel/branches/2.6.18/current/configs/ (depending on your architecture; the below example is for i686): 

# wget http://download.openvz.org/kernel/branches/2.6.18/current/configs/kernel-2.6.18-i686.config.ovz -O .config

Patching and configuringEdit

Now you can apply the openvz kernel patch and modify your kernel-config: 

# ../kernel-patches/all/apply/openvz
# make menuconfig

You need the following OpenVZ kernel config settings: (taken from OpenVZ Kernel 2.6.18-028test010.1 on 686) 

Filesystem
\_ [*] Second extended fs support (CONFIG_EXT2_FS)
\_ [*] Ext3 journalling file system support (CONFIG_EXT3_FS)
\_ [M] Quota Support (CONFIG_QUOTA)
	\_ [*] Compatibility with older quotactl interface (CONFIG_QUOTA_COMPAT)
	\_ [*]Quota format v2 support (CONFIG_QFMT_V2)
\_ [*] VPS filesystem (CONFIG_SIM_FS)
\_ [M] Virtuozzo Disk Quota support	(CONFIG_VZ_QUOTA)
	\-> [*] Per-user and per-group quota in Virtuozzo quota partitions (VZ_QUOTA_UGID)

Security
	\->[ ] Enable different security models

OpenVZ ... (what else :-)
\_[*] Virtual Environment support (CONFIG_VE)
	\_ <M> VE calls interface (CONFIG_VE_CALLS)
	\_ <M> VE networking (CONFIG_VE_NETDEV)
	\_ <M> Virtual ethernet device (CONFIG_VE_ETHDEV)
	\_ <M> VE device (CONFIG_VZ_DEV)
	\_ [*] VE netfiltering (CONFIG_VE_IPTABLES)
	\_ <M> VE watchdog module (CONFIG_VZ_WDOG)
	\_ <M> Checkpointing & restoring Virtual Environments (CONFIG_VZ_CHECKPOINT)

User resources ... (User Beancounters)
\_ [*] Enable user resource accounting (CONFIG_USER_RESOURCE)
\_ [*] Account physical memory usage ( CONFIG_USER_RSS_ACCOUNTING)
\_ [*] Account disk IO (CONFIG_UBC_IO_ACCT)
\_ [*] Account swap usage (CONFIG_USER_SWAP_ACCOUNTING)
\_ [*] Report resource usage in /proc (CONFIG_USER_RESOURCE_PROC)
\_ [*] User resources debug features (CONFIG_UBC_DEBUG)
\_ [*] Debug kmemsize with cache counters (CONFIG_UBC_DEBUG_KMEM)
  Note: better to build the kernel-headers as well, so afterward other kernel-modules can

be built without whole kernel tree (e.g. drbd -> drbd0.7-module-source)

See also : "make-kpkg --targets"

CompilingEdit

Compile your kernel (as user root, or you need the --rootcmd!) 

# make-kpkg --append_to_version=-1-openvz --added_patches=openvz --revision=1 --initrd binary-arch
or all above with one step 
# make-kpkg --append_to_version=-1-openvz --added_patches=openvz --revision=1 --initrd --config menuconfig binary-arch

InstallingEdit

Install the kernel and update initramfs: 

# dpkg -i ../linux-image-2.6.18-1-openvz_1_i386.deb
# update-initramfs -c -k 2.6.18-1-openvz
  Note: update-initramfs is done, when make-kpkg is use with --initrd option

http://wiki.openvz.org/Installation_on_Debian_%28etch%29#Install_the_toolset

  Note: update-grub can be configured by /etc/kernel-img.conf

BootloaderEdit

Update the bootloader (if not done before)

GRUB : 

# /usr/sbin/update-grub
  Note: since the Debian Etch release the location of update-grub is moved from /sbin/update-grub to /usr/sbin/update-grub

LILO: 

# lilo

Installing the Tools and ConfiguringEdit

Retrieved from "https://wiki.openvz.org/index.php?title=Compiling_the_OpenVZ_kernel_(the_Debian_way)&oldid=8145"