Plesk in VE
Below is an example transcript of installing Plesk into an OpenVZ VE (VE#11):
# vzctl create 11 --ostemplate centos-4-i386-default Creating VPS private area: /vz/private/11 Performing postcreate actions VPS private area was created # vzctl set 11 --quotaugidlimit 150 --save Saved parameters for VPS 11 # vzctl set 11 --numproc 400:400 --save Saved parameters for VPS 11 # vzctl set 11 --kmemsize 16384000:18022400 --save Saved parameters for VPS 11 # vzctl set 11 --privvmpages 262144:292912 --save Saved parameters for VPS 11 # vzctl set 11 --hostname=plesk.example.com --save Saved parameters for VPS 11 # vzctl set 11 --diskspace 2000000:2000000 --save Saved parameters for VPS 11 # vzctl set 11 --shmpages 16384:16384 --save UB limits were set successefully # vzctl set 11 --ipadd 127.1.2.3 --save Saved parameters for VPS 11 # vzctl set 11 --userpasswd root:pass Changing password for user root. passwd: all authentication tokens updated successfully. # vzctl set 11 --iptables "iptable_filter iptable_mangle ipt_limit ipt_multiport ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_conntrack ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc" --save Saved parameters for VPS 11 # vzctl start 11 Starting VPS ... VPS is mounted Adding IP address(es): 192.168.51.55 Setting CPU units: 1000 Set hostname: plesk.local Setting quota ugidlimit: 150 VPS start in progress...
If you want to run a VPN server inside the VE you need to TUN/TAP module. The following commands consolidate what needs to be done:
# modprobe tun # lsmod | grep tun tun 6624 0 # vzctl set 11 --devices c:10:200:rw --save Setting devices Saved parameters for VPS 11 # vzctl exec 11 mkdir -p /dev/net # vzctl exec 11 mknod /dev/net/tun c 10 200 # vzctl exec 11 chmod 600 /dev/net/tun
Make sure that the VE's hostname (plesk.example.com) is resolving correctly to the VE's IP address (127.1.2.3). You can also add the corresponding record to /etc/hosts as a workaround.
Then, go to http://www.swsoft.com/download/plesk8/ and download the appropriate autoinstaller or the appropriate RPM. In this case, [[1]] 4.3.
If you want to download the autoinstaller all you need to do is:
# cp -f /etc/resolv.conf /vz/private/11/etc/resolv.conf # vzctl enter 11 entered into VE 11 # cd # wget http://download1.swsoft.com/Plesk/Plesk8.1/CentOS4.3/psa_installer_v3.1.0_build061201.02_os_CentOS_4.3_i386 # chmod a+x psa* # ./psa_installer_v3.1.0_build061201.02_os_CentOS_4.3_i386
Proceed as you would if you were installing Plesk without OpenVZ.
When the installation over you will see something along the lines of:
Congratulations!
Plesk has been successfully installed on your server.
To complete the system configuration, please proceed to URL:
https://plesk.local:8443/ or
https://127.0.0.1:8443/
Use the login name 'admin' and password 'setup'.
Further, use the following commands to start and stop Plesk:
"/etc/init.d/psa start" and
"/etc/init.d/psa stop" respectively.
All Plesk control panel documentation is available at
http://www.swsoft.com/en/products/plesk80/docs
*****************************************************************************
* *
* NOTE: You have a default key file with limited functionality *
* currently installed for Plesk, which allows *
* creating one client account, one domain, one mail name and *
* one web user. *
* To extend the limits of your license key and enable *
* additional features, please contact the SWsoft, Inc. sales *
* department: sales@swsoft.com *
* *
* Thank you for choosing our products! *
*****************************************************************************
o Plesk "about" webpage: http://www.swsoft.com/en/products/plesk/ http://www.swsoft.com/en/products/plesk/docs/
Done. You can create a prepackaged template from this VE for future installations.
