Container enter failed

From OpenVZ Virtuozzo Containers Wiki
Revision as of 19:30, 30 September 2014 by Nataraj (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Symptoms[edit]

error: open pty: No such file or directory

Solutions[edit]

Using strace[edit]

You can use strace to analyse the command further:

# strace -ff vzctl enter 101
....
fstat64(...st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0)...) fail
....

Recompile the kernel with the following option:

CONFIG_LEGACY_PTYS=y

LEGACY_PTYS[edit]

Temporary fix[edit]

Note: This is a temporary fix so you can enter the VE.

  • Create the LEGACY_PTYS devices:
vzctl exec 101 /sbin/MAKEDEV tty
vzctl exec 101 /sbin/MAKEDEV pty
vzctl exec 101 mknod --mode=666 /dev/ptmx c 5 2
vzctl enter 101

Permanent fix with udev[edit]

  • For a permanent fix with udev, you will need to force udev to make LEGACY_PTYS:
cat > /etc/udev/makedev.d/51-udev.nodes
# These device have to be created manually
tty0
tty1
tty2
tty3
....
ttyp0
ttyp1
ttyp2
ttyp3
....
ptyp0
ptyp1
ptyp2
ptyp3
....

Permanent fix without udev[edit]

  • Alternatively, you can disable udev:

Edit the /etc/rc.d/rc.sysinit file and comment out the /sbin/start_udev line

Or you can run the following command:

sed -i 's|/sbin/start_udev|#/sbin/start_udev|g' /etc/rc.d/rc.sysinit

Warning Updates to the package which owns this file may revert your changes.

Note This was tested with CentOS VE.

Debian only[edit]

  • Enter the VE manually
CTID=101
vzctl exec $CTID "mount -t devpts devpts /dev/pts" 
vzctl enter $CTID
  • Remove udev using apt
CTID=101
vzctl exec $CTID apt-get remove udev
vzctl restart $CTID

Older Slackware[edit]

Check that /dev/pts is mounted under the container as a devpts filesystem:

vzctl exec VEID mount

If it is not, try this immediate fix:

vzctl exec VEID mount /dev/pts

You should now be able to enter the VPS. You will need to fix /etc/rc.d/rc.S and/or /etc/fstab to ensure that /dev/pts is mounted in the boot process.


See also[edit]