Difference between revisions of "Hardware testing"

From OpenVZ Virtuozzo Containers Wiki
Jump to: navigation, search
(Added Installation and Usage subsections to Memtester)
(Added some disclaimer, sections Combined tests: and External links)
Line 1: Line 1:
 
Sometimes when you have a kernel panic, oops, or other fatal crash, this is not programmers whom to blame. This article describes how to properly test your hardware to check it's in a good shape.
 
Sometimes when you have a kernel panic, oops, or other fatal crash, this is not programmers whom to blame. This article describes how to properly test your hardware to check it's in a good shape.
 +
 +
Note that most of the tests described below could do harm to your machine if something is wrong with it (e.g. it is overclocked, undercooled etc). In general, overclocking is not recommended for your production server boxes.
  
 
== RAM tests ==
 
== RAM tests ==
Line 9: Line 11:
 
[http://memtest.org/ Memtest86+] is a forked version of Memtest86 with some features added.
 
[http://memtest.org/ Memtest86+] is a forked version of Memtest86 with some features added.
  
=== Installation ===
+
==== Installation ====
 
You can either download and install one of this programs from the sites above, or they can be a part of your Linux distribution already.
 
You can either download and install one of this programs from the sites above, or they can be a part of your Linux distribution already.
  
Line 19: Line 21:
 
emerge memtest86+</pre>
 
emerge memtest86+</pre>
  
=== Usage ===
+
==== Usage ====
 
To test your system for faulty RAM, install either memtest and reboot into it. Run it for at least a few hours (at least 2-3 iterations). If there will be even a single error reported, you have to change your RAM chips (or, if your system is overclocked, downclock it to normal speed).
 
To test your system for faulty RAM, install either memtest and reboot into it. Run it for at least a few hours (at least 2-3 iterations). If there will be even a single error reported, you have to change your RAM chips (or, if your system is overclocked, downclock it to normal speed).
  
Line 25: Line 27:
 
[http://pyropus.ca/software/memtester/ Memtester] is a userspace utility for testing the memory subsystem for faults. The good thing is you can test your memory without a need to reboot the server, and you can run other programs with it. The bad thing is not all the memory is tested.
 
[http://pyropus.ca/software/memtester/ Memtester] is a userspace utility for testing the memory subsystem for faults. The good thing is you can test your memory without a need to reboot the server, and you can run other programs with it. The bad thing is not all the memory is tested.
  
=== Installation ===
+
==== Installation ====
 
For Fedora Core:
 
For Fedora Core:
 
<pre>yum install memtester</pre>
 
<pre>yum install memtester</pre>
Line 34: Line 36:
 
For other systems: download the sources from the [http://pyropus.ca/software/memtester/ Memtester homepage].
 
For other systems: download the sources from the [http://pyropus.ca/software/memtester/ Memtester homepage].
  
=== Usage ===
+
==== Usage ====
  
 
Invoke memtester as a root, giving an amount of memory it will test as an argument, e.g.:
 
Invoke memtester as a root, giving an amount of memory it will test as an argument, e.g.:
Line 42: Line 44:
  
 
== CPU cooling tests ==
 
== CPU cooling tests ==
 +
Such tests checks that your CPU can work fine under highest possible load and temperature.
 +
 +
=== Cpuburn ===
 
[http://pages.sbcglobal.net/redelm/ Сpuburn] is an utility to burn your CPU as high as possible. It tests your system stability by checking how the CPU and the whole system is working under high temperatures.
 
[http://pages.sbcglobal.net/redelm/ Сpuburn] is an utility to burn your CPU as high as possible. It tests your system stability by checking how the CPU and the whole system is working under high temperatures.
  
Line 65: Line 70:
  
 
Cpuburn author says burnMMX is not optimal for AMD processors; use burnBX if you have AMD.
 
Cpuburn author says burnMMX is not optimal for AMD processors; use burnBX if you have AMD.
 +
 +
== Combined tests ==
 +
 +
It is also a good thing to run cpuburn and memtester in parallel. Chances are higher that some more errors are detected that way.
 +
 +
== External links ==
 +
* [http://memtest86.com/ Memtest86]
 +
* [http://memtest.org/ Memtest86+]
 +
* [http://pyropus.ca/software/memtester/ Memtester]
 +
* [http://pages.sbcglobal.net/redelm/ Сpuburn]

Revision as of 14:08, 25 May 2006

Sometimes when you have a kernel panic, oops, or other fatal crash, this is not programmers whom to blame. This article describes how to properly test your hardware to check it's in a good shape.

Note that most of the tests described below could do harm to your machine if something is wrong with it (e.g. it is overclocked, undercooled etc). In general, overclocking is not recommended for your production server boxes.

RAM tests

Random Access Memory (RAM) is sometimes faulty, which leads to some very strange system crashes. It is though highly recommended to test your system RAM. A several approaches and tools can be used.

Memtest86 and Memtest86+

Memtest86 is a stand-alone RAM tester. It can either be booted from a CD, or from your normal Linux bootloader, such as GRUB or LILO.

Memtest86+ is a forked version of Memtest86 with some features added.

Installation

You can either download and install one of this programs from the sites above, or they can be a part of your Linux distribution already.

For Fedora Core, memtest86+ is available:

yum install memtest86+

For Gentoo, both programs are available:

emerge memtest86
emerge memtest86+

Usage

To test your system for faulty RAM, install either memtest and reboot into it. Run it for at least a few hours (at least 2-3 iterations). If there will be even a single error reported, you have to change your RAM chips (or, if your system is overclocked, downclock it to normal speed).

Memtester

Memtester is a userspace utility for testing the memory subsystem for faults. The good thing is you can test your memory without a need to reboot the server, and you can run other programs with it. The bad thing is not all the memory is tested.

Installation

For Fedora Core:

yum install memtester

For Gentoo:

emerge memtester

For other systems: download the sources from the Memtester homepage.

Usage

Invoke memtester as a root, giving an amount of memory it will test as an argument, e.g.:

# /usr/sbin/memtester 512M

The more memory you will specify the better.

CPU cooling tests

Such tests checks that your CPU can work fine under highest possible load and temperature.

Cpuburn

Сpuburn is an utility to burn your CPU as high as possible. It tests your system stability by checking how the CPU and the whole system is working under high temperatures.

Installation

For Fedora Core you can get the RPMS from DAG.

For Gentoo:

emerge cpuburn

For other systems: download tarball from the home page, untar and run.

Usage

It is recommended to switch to single-user mode and remount all the partitions read-only, just in case of system hang.

Run

burnBX || echo $? &

for at least 15 minutes. If you have more than one physical CPU, repeat the command. If nothing is happening withing 15-20 minutes, and your system is still responding, you can conclude the test is passed, and kill the process(es):

killall -TERM burnBX

You can also use burnMMX utility:

burnMMX J || echo $? &

Cpuburn author says burnMMX is not optimal for AMD processors; use burnBX if you have AMD.

Combined tests

It is also a good thing to run cpuburn and memtester in parallel. Chances are higher that some more errors are detected that way.

External links