Difference between revisions of "Installation on Debian/old"

From OpenVZ Virtuozzo Containers Wiki
Jump to: navigation, search
(Repository setup)
(Repository setup)
Line 35: Line 35:
 
</pre>
 
</pre>
  
There is also an '''experimental''' repository with kernel 2.6.24. '''Use at you own risk!'''
+
There is even an '''experimental''' repository with kernel 2.6.24. '''Use it at your own risk!'''
 
<pre>
 
<pre>
 
# echo -e "\ndeb http://debian.systs.org/debian gitty openvz" >> /etc/apt/sources.list
 
# echo -e "\ndeb http://debian.systs.org/debian gitty openvz" >> /etc/apt/sources.list

Revision as of 11:20, 4 May 2008

OpenVZ consists of a kernel, user-level tools, and container templates.

This guide tells how to install the kernel and the tools on Debian stable.

Requirements

Filesystems

It is recommended to use a separate partition for container private directories (by default /var/lib/vz/private/<CTID>). The reason why you should do so is that if you wish to use OpenVZ per-container disk quota, you won't be able to use usual Linux disk quotas on the same partition. Bear in mind that per-container quota in this context includes not only pure per-container quota but also usual Linux disk quota used in container, not on HN.

At least try to avoid using root partition for containers because the root user of container will be able to overcome the 5% disk space barrier in some situations. If the HN root partition is completely filled, it will break the system.

OpenVZ per-container disk quota is supported only for ext2/ext3 filesystems so use one of these filesystems (ext3 is recommended) if you need per-container disk quota.

Repository setup

At the moment two different repositories are online at http://download.openvz.org:

by Ola Lundqvist <opal@debian.org>
(OpenVZ kernels only)
apt-uri http://download.openvz.org/debian
by Thorsten Schifferdecker <tsd@debian.systs.org>
apt-uri http://download.openvz.org/debian-systs
(Mirror of OpenVZ Repository from http://debian.systs.org/)
Yellowpin.svg Note: The next steps used the Repository at http://download.openvz.org/debian-systs, the actually OpenVZ Tools for Debian are exist only in unstable, see http://packages.debian.org/vzctl
Yellowpin.svg Note: per default on Ubuntu system, root task are done with sudo

This can be achieved by the following commands, as root or as privileged "sudo" user

# echo -e "\ndeb http://download.openvz.org/debian-systs etch openvz" >> /etc/apt/sources.list
# wget -q http://download.openvz.org/debian-systs/dso_archiv_signing_key.asc -O- | apt-key add - && apt-get update

There is even an experimental repository with kernel 2.6.24. Use it at your own risk!

# echo -e "\ndeb http://debian.systs.org/debian gitty openvz" >> /etc/apt/sources.list
# wget -q http://debian.systs.org/dso_archiv_signing_key.asc -O- | apt-key add - && apt-get update

Kernel installation

Yellowpin.svg Note: In case you want to recompile the OpenVZ kernel yourself on Debian, see Compiling the OpenVZ kernel (the Debian way).

First, you need to choose what kernel you want to install.

OpenVZ Kernel list built with kernel config from http://download.openvz.org
Kernel Description Hardware Debian Architecture
ovzkernel-2.6.18 uniprocessor up to 4GB of RAM i386 and amd64
ovzkernel-2.6.18-smp symmetric multiprocessor up to 4 GB of RAM i386 and amd64
ovzkernel-2.6.18-enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM i386 only
OpenVZ Kernel list built with official Debian kernel config and OpenVZ Settings
Kernel Description Hardware Debian Architecture
fzakernel-2.6.18-686 uni- and multiprocessor up to 4GB of RAM i386
fzakernel-2.6.18-686-bigmem symmetric multiprocessor up to 64 GB of RAM i386
fzakernel-2.6.18-amd64 uni- and multiprocessor amd64
 # apt-get install <kernel>

Configuring the bootloader

In case GRUB is used as the boot loader, it will be configured automatically, or execute update-grub; lines similar to these will be added to the /boot/grub/menu.lst file:

[...]
  title           Debian GNU/Linux, kernel 2.6.18-ovz-028stab051.1-686
  root            (hd0,1)
  kernel          /vmlinuz-2.6.18-ovz-028stab051.1-686 root=/dev/sda5 ro vga=791
  initrd          /initrd.img-2.6.18-ovz-028stab051.1-686
  savedefault
[...]
Yellowpin.svg Note: per default on debian/ubuntu, a 2.6.22 kernel will boot before a 2.6.18, please check manually the grub boot order. See man update-grub for more details

Rebooting into OpenVZ kernel

Warning.svg Warning: Before you restart your Server, keep in mind, that your system has all needed modules enabled; booting from your harddisk (e.g. hardware modules, raid system(s), lvm2 etc). May you need a INITRD (initramdisk) or compile needed kernel modules statically in.

Now reboot the machine and choose the OpenVZ Linux Kernel on the boot loader menu. If the OpenVZ kernel has been booted successfully, proceed to installing the user-level tools for OpenVZ.

Installing the user-level tools

OpenVZ needs some user-level tools installed. Those are:

vzctl
A utility to control OpenVZ containers (create, destroy, start, stop, set parameters etc.)
vzquota
A utility to manage quotas for containers. Mostly used indirectly (by vzctl).
 # [sudo] apt-get install vzctl vzquota

Configuring

sysctl

There are a number of kernel parameters that should be set for OpenVZ to work correctly. These parameters are stored in /etc/sysctl.conf file. Here is the relevant part of the file; please edit it accordingly.

Yellowpin.svg Note: vzctl version from debian-systs, automate changing sysctl options for openvz
[...]

# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled

net.ipv4.conf.default.forwarding=1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.ip_forward=1

# Enables source route verification
net.ipv4.conf.all.rp_filter = 1

# Enables the magic-sysrq key
kernel.sysrq = 1

# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn = 0

# we do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0

[...]
 # [sudo] sysctl -p
Yellowpin.svg Note: You can make a symlink from /var/lib/vz to /vz as backward

compatibility to OpenVZ as installed in other distributions (Debian vz root directory is /var/lib/vz to be FHS-compliant.

 # [sudo] ln -s /var/lib/vz /vz 

OS templates

To install a container, you need OS template(s).

Precreated templates can be found here.

You can create your own templates, see Debian template creation, [[Ubuntu Gutsy template creation] and.

Yellowpin.svg Note: Setup your prefered standard OS Template : edit the /etc/vz/vz.conf
 # [sudo] apt-get install vzctl-ostmpl-debian

Additional User Tools

vzprocps
A set of utilities to provide system information (vzps and vztop)
vzdump
A utility to backup and restore container.
 # [sudo] apt-get install vzprocps vzdump

Use it!

After installing the OpenVZ kernel, user tools and a minimal OS template to create a first container and do some basic operations in OpenVZ environment. Read the download:doc/OpenVZ-Users-Guide.pdf, browse this wiki.