Editing Migration from Linux-VServer to OpenVZ

{{Roughstub}}

This article describes the migration from Linux-VServer to OpenVZ.

== Details of migration process ==

=== Initial conditions ===

The following example of Linux-VServer based solution was used for the experiment:

* Kernel linux-2.6.17.13 was patched by the patch-2.6.17.13-vs2.0.2.1.diff and rebuild;
* Util-vserver-0.30.211 tools were used for creating containers;

  # vserver-info
  Versions:
  Kernel: 2.6.17.13-vs2.0.2.1
  VS-API: 0x00020002
  util-vserver: 0.30.211; Dec  5 2006, 17:10:21
 
  Features:
  CC: gcc, gcc (GCC) 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)
  CXX: g++, g++ (GCC) 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)
  CPPFLAGS: ''
  CFLAGS: '-g -O2 -std=c99 -Wall -pedantic -W -funit-at-a-time'
  CXXFLAGS: '-g -O2 -ansi -Wall -pedantic -W -fmessage-length=0 -funit-at-a-time'
  build/host: i686-pc-linux-gnu/i686-pc-linux-gnu
  Use dietlibc: yes
  Build C++ programs: yes
  Build C99 programs: yes
  Available APIs: v13,net
  ext2fs Source: kernel
  syscall(2) invocation: alternative
  vserver(2) syscall#: 273/glibc
 
  Paths:
  prefix: /usr/local
  sysconf-Directory: ${prefix}/etc
  cfg-Directory: ${prefix}/etc/vservers
  initrd-Directory: $(sysconfdir)/init.d
  pkgstate-Directory: ${prefix}/var/run/vservers
  vserver-Rootdir: /vservers
  #

VServer v345 was built using vserver vX build utility and populated by using the tarballed template of Fedora Core 4.
 
  # vserver v345 start
  Starting system logger:                                    [  OK  ]
  Initializing random number generator:                      [  OK  ]
  Starting crond: l:                                         [  OK  ]
  Starting atd:                                              [  OK  ]
  # vserver v345 enter
  [/]# ls -l
  total 44
  drwxr-xr-x    2 root     root         4096 Oct 26  2004 bin
  drwxr-xr-x    3 root     root         4096 Dec  8 17:16 dev
  drwxr-xr-x   27 root     root         4096 Dec  8 15:21 etc
  -rw-r--r--    1 root     root            0 Dec  8 15:33 halt
  drwxr-xr-x    2 root     root         4096 Jan 24  2003 home
  drwxr-xr-x    7 root     root         4096 Oct 26  2004 lib
  drwxr-xr-x    2 root     root         4096 Jan 24  2003 mnt
  drwxr-xr-x    3 root     root         4096 Oct 26  2004 opt
  -rw-r--r--    1 root     root            0 Dec  7 20:17 poweroff
  dr-xr-xr-x   80 root     root            0 Dec  8 11:38 proc
  drwxr-x---    2 root     root         4096 Dec  7 20:17 root
  drwxr-xr-x    2 root     root         4096 Oct 26  2004 sbin
  drwxrwxrwt    2 root     root           40 Dec  8 17:16 tmp
  drwxr-xr-x   15 root     root         4096 Jul 27  2004 usr
  drwxr-xr-x   17 root     root         4096 Oct 26  2004 var
  [/]# sh
  sh-2.05b#
  .........

As a result we obtain running virtual environment v345:

  # vserver-stat
 
  CTX   PROC    VSZ    RSS  userTIME   sysTIME    UPTIME NAME
  0       51  90.9M  26.3M   0m58s75   2m42s57  33m45s93 root server
  49153    4  10.2M   2.8M   0m00s00   0m00s11  21m45s42 v345
 
  # 

=== Starting migration to OpenVZ ===

Downloading and installing the stable OpenVZ kernel.

Install the OpenVZ kernel, as described in [[Quick installation]]. 

After the kernel is installed, reboot the machine. After rebooting and logging in you will see the following reply on vserver-stat call:

  # vserver-stat
  can not change context: migrate kernel feature missing and 'compat' API disabled: Function not implemented

It is a natural thing that now virtual environment v345 is unavailable. The following steps will be devoted to making it
work over OpenVZ kernel.

=== Downloading and installing vzctl package ===

OpenVZ solution requires installing a set of tools: vzctl and vzquota packages. Download and install it, as described in [[quick installation]].

If rpm complains about unresolved dependencies, you'll have to satisfy them first, then repeat the installation.
Then launch the OpenVZ:

  # /sbin/service vz start
  Starting OpenVZ:                                           [  OK  ]
  Bringing up interface venet0:                              [  OK  ]
  Configuring interface venet0:                              [  OK  ]

Currently vzlist utility is unable to find any containers:
  # vzlist
  Containers not found

=== Updating different configurations  ===

Get the existing guest OSs to the right place:

  # cd /vz
  # mkdir private
  # mkdir private/345
  # mv /vservers/v345 /vz/private/345
In Debian Lenny the path is /var/lib/vz/private/345 instead.
In any case it is a good idea to have the guest file system in a dedicated partition or lvm container (shown in the example below) and just mount it there
instead of moving:
  # mkdir /var/lib/vz/private/345
  # mount /dev/mapper/vg01-lvol5 /var/lib/vz/private/345

Now it is time for creating configuration files for OpenVZ container. Use the basic sample
configuration presented in /etc/sysconfig/vz-scripts/ve-vps.basic.conf-sample file:

  # cd /etc/sysconfig/vz-scripts
  # cp ve-vps.basic.conf-sample 345.conf
In Debian Lenny the configuration is located in /etc/vz/conf/ , in this case type:
  # cd /etc/vz/conf
  # cp ve-vps.basic.conf-sample  345.conf

Now, let's set some parameters for the new container.

First, we need to tell which distro the container is running:
  # echo "OSTEMPLATE=\"fedora-core-4\"" >> 345.conf
  # echo "OSTEMPLATE=\"debian\"" >> 345.conf    (for Debian Lenny)

Then we set a few more parameters:
  vzctl set 345 --onboot yes --save # to make it start upon reboot
  vzctl set 345 --ipadd 192.168.0.145 --save
  vzctl set 345 --hostname test345.my.org --save

== Testing how the guest OSs successfully work over OpenVZ ==

Now you can start a container:

 # vzctl start 345

and see if it's running:
  # vzlist -a
  CTID      NPROC  STATUS  IP_ADDR         HOSTNAME
  345          5   running 192.168.0.145   test345.my.org

You can run commands in it:

  # vzctl exec 345 ls -l
  total 48
  drwxr-xr-x    2 root     root         4096 Oct 26  2004 bin
  drwxr-xr-x    3 root     root         4096 Dec 11 12:42 dev
  drwxr-xr-x   27 root     root         4096 Dec 11 12:44 etc
  -rw-r--r--    1 root     root            0 Dec 11 12:13 fastboot
  -rw-r--r--    1 root     root            0 Dec  8 15:33 halt
  drwxr-xr-x    2 root     root         4096 Jan 24  2003 home
  drwxr-xr-x    7 root     root         4096 Oct 26  2004 lib
  drwxr-xr-x    2 root     root         4096 Jan 24  2003 mnt
  drwxr-xr-x    3 root     root         4096 Oct 26  2004 opt
  -rw-r--r--    1 root     root            0 Dec  7 20:17 poweroff
  dr-xr-xr-x   70 root     root            0 Dec 11 12:42 proc
  drwxr-x---    2 root     root         4096 Dec  7 20:17 root
  drwxr-xr-x    2 root     root         4096 Dec 11 12:13 sbin
  drwxrwxrwt    2 root     root         4096 Dec  8 12:40 tmp
  drwxr-xr-x   15 root     root         4096 Jul 27  2004 usr
  drwxr-xr-x   17 root     root         4096 Oct 26  2004 var

== Issues ==

=== Starting ===

If starting fails with a message '''Unable to start init, probably incorrect template''' either the /sbin/init file is missing in the guest file system, or just not executable. Or the guest file system is completely absent or dislocated. The proper path where you must place is specified in the vz.conf file, namely the parameter VE_PRIVATE. For Debian this file can be found in /etc/vz.

=== Networking ===

==== Starting networking in VEs ====

The vserver-originating containers do not initialize network at all. Thus one needs to use following command to enable networking start (inside of the migrated container):

 update-rc.d networking defaults

==== Migrating your VServer Shorewall setup ====

If you had the [http://www.shorewall.net/ Shorewall firewall] running on the hardware node to route traffic to and from your guests, here are a couple of advices, provided you want a networking setup close to what you had with Vserver (i.e. running <code>vnet</code> interfaces, not <code>veth</code> ones) :
* do not use the <code>venet0</code> interface in Shorewall's configuration as the <code>vz</code> service starts after Shorewall (at least on Debian) and thus the interface does not exist when Shorewall starts. Do not use <code>detect</code> for the broadcast in <code>/etc/shorewall/interfaces</code>.
* for your VEs to be able to talk to each other, use the <code>routeback</code> option for <code>venet0</code> (and others) in <code>/etc/shorewall/interfaces</code>.

==== IP src from VEs ====

If you run a mail server in a VE, and if the hardware node has multiple network interfaces, you may have mail routing issues because of the originated IP address of the packets coming from the hardware node. Simply specify an interface in <code>/etc/vz/vz.conf</code> :
<pre>VE_ROUTE_SRC_DEV="iface_name"</pre>

=== Disk space information ===

Disk space information is empty. Do the following to fix:
 rm /etc/mtab
 ln -s /proc/mounts /etc/mtab

=== /dev ===

Vserver mounts /dev/pts filesystem for container transparently, whereas openvz does not. To compensate the ommission, you need to move aside /dev directory in the vserver-originating container and copy /dev directory from openvz based container.

Additionally, Ubuntu based vservers have the udev package installed which prevents access to the console in openvz. This error message is an example of the problem:

 # vzctl enter 345
 enter into CT 345 failed
 Unable to open pty: No such file or directory

The fix is to remove the udev package from the guest:


 # vzctl exec 345 'dpkg --force-depends --purge udev'
 (Reading database ... dpkg: udev: dependency problems, but removing anyway as you request:
  initramfs-tools depends on udev (>= 117-5).
 15227 files and directories currently installed.)
 Removing udev ...
 Purging configuration files for udev ...
 dpkg - warning: while removing udev, directory `/lib/udev/devices/net' not empty so not removed.
 dpkg - warning: while removing udev, directory `/lib/udev/devices' not empty so not removed.


Now restart the container, you should now be able to use the console.


 # vzctl restart 345
 Restarting container
 ...
  <SNIP>
 ...
 Container start in progress...

 # vzctl enter 345
 entered into CT 345
 root@test:/#


=== /proc ===

The /proc filesystem is not automatically mounted by openvz. So the vserver needs to mount it itself. The simplests (not the best) way it can be done, is by sticking following command at the end of /etc/init.d/bootmisc.sh:
 mount /proc

[[Category:HOWTO]]