Difference between revisions of "Monitoring openvz resources using nagios and snmp"

From OpenVZ Virtuozzo Containers Wiki
Jump to: navigation, search
m (nagios plugin/failcnt in python)
Line 259: Line 259:
 
def send_mail(count_change):
 
def send_mail(count_change):
 
         mailfrom = 'root@' + str(host)
 
         mailfrom = 'root@' + str(host)
         mailto = 'tech@inqnet.at'
+
         mailto = 'to@example.com'
 
         mailsubject = 'Beancounters changed in the last 5 minutes'
 
         mailsubject = 'Beancounters changed in the last 5 minutes'
 
         mailbody = 'The Beancounter-failcnt value of the following veid(s) and resource(s) has \nincreased in the last 5 minutes:\n\n'
 
         mailbody = 'The Beancounter-failcnt value of the following veid(s) and resource(s) has \nincreased in the last 5 minutes:\n\n'

Revision as of 23:06, 3 April 2008

snmpd configuration

Debian Etch example:

apt-get install snmpd

edit /etc/default/snmpd : remove -u snmp and replace 127.0.0.1 with your ip, Full/etc/default/snmpd example:

export MIBDIRS=/usr/share/snmp/mibs
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null  -I -smux -p /var/run/snmpd.pid 207.46.250.119'
TRAPDRUN=no
TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid'

For Debian 4.x:

export MIBDIRS=/usr/share/snmp/mibs
SNMPDRUN=yes
SNMPDOPTS='-Lsd -Lf /dev/null  -I -smux -p /var/run/snmpd.pid'
TRAPDRUN=no
TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid'

Create user(my_username) and add new mib. Password need a min. of 8 charactes. Username only characters:

/etc/init.d/snmpd stop
echo rouser my_username priv > /etc/snmp/snmpd.conf
echo "extend  .1.3.6.1.4.1.2021.51  beancounters  /bin/cat /proc/user_beancounters" >> /etc/snmp/snmpd.conf
echo "extend  .1.3.6.1.4.1.2021.52  vzquota  /bin/cat /proc/vz/vzquota" >> /etc/snmp/snmpd.conf
echo  createUser my_username MD5 my_password DES >> /var/lib/snmp/snmpd.conf
/etc/init.d/snmpd start 

Testing snmp:

snmpwalk   -v 3  -u my_usrname -l authPriv   -a MD5 -A my_password -x DES -X my_password  207.46.250.119

Warning: the minimum pass phrase length is 8 characters.

nagios configuration

example nagios configuration

add to configuration:

define command {
command_name check_snmp_openvz_on_port
# command_line /usr/local/bin/check_snmp_openvz.sh  $HOSTADDRESS$ PORT    USER    PASSWORD
command_line /usr/local/bin/check_snmp_openvz.sh  $HOSTADDRESS$ $ARG1$  $ARG2$  $ARG3$
}
define host {
        host_name   openvz-server
        alias       Serwer Openvz
        address     207.46.250.119
        use         generic-host
        contact_groups  admins
        }
define service{
        use                             generic-service
        host_name                       openvz-server
        service_description             Virtual Machines Limits
        check_command                   check_snmp_openvz_on_port!161!my_username!my_password
        max_check_attempts              1
        }

nagios plugin

It is shell script:

# cat /usr/local/bin/check_snmp_openvz.sh
#!/bin/bash
HOST=$1
PORT=$2
USER=$3
PASS=$4
export FILE=/tmp/$HOST.beancounters
RET=0

DATA_TMP=`snmpwalk   -v 3  -u $USER -l authPriv   -a MD5 -A $PASS -x DES -X $PASS $HOST:$PORT .1.3.6.1.4.1.2021.51.4`
if [ "$?" != "0" ]; then
        echo "Unknown snmp error"
        exit 1
fi

DATA=`echo "$DATA_TMP"| perl -ne '/"(.*)"/ ; print "$1\n" ;'`

if [ -f $FILE ]; then
echo "$DATA" | perl  -n -e'
use Data::Dumper;
my $file=$ENV{"FILE"};
my $ret=0 ;
my $vid ;
my $resource ;
my $held ;
my $maxheld ;
my $barrier ;
my $limit ;
my $failcnt ;
my %beancounters ;
my %beancounters_old ;
while(<STDIN>){
        my %vmachine;
        if ( /\D*(\d+):.*/ ){ $vid=$1; $beancounters{$vid}=\%vmachine ; }
        if ( /^[\W\d]+([a-z]+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+).*/ ) {
                $resource=$1 ;
                $held=$2 ;
                $maxheld=$3 ;
                $barrier=$4 ;
                $limit=$5 ;
                $failcnt=$6 ;
                ${beancounters{$vid}}{$resource}=[$held , $maxheld , $barrier , $limit ,$failcnt ];
                if ( ($held  > $barrier) && ($barrier != 0) ) {
                        print "WARNING: Limits on $vid: $resource  held->$held , barrier->$barrier ( limit->$limit ) " ;
                        $ret=1;
                }
        }
}

# read and parse old data
open(MYINPUTFILE, "<$file");
while(<MYINPUTFILE>){
        my %vmachine;
        if ( /\D*(\d+):.*/ ){ $vid=$1; $beancounters_old{$vid}=\%vmachine ; }
        if ( /^[\W\d]+([a-z]+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+).*/ ) {
                $resource=$1 ;
                $held=$2 ;
                $maxheld=$3 ;
                $barrier=$4 ;
                $limit=$5 ;
                $failcnt=$6 ;
                ${beancounters_old{$vid}}{$resource}=[$held , $maxheld , $barrier , $limit ,$failcnt ];
        }
}

foreach my $vmachine_id (keys %beancounters) {
        foreach my $resource (keys %{$beancounters{$vmachine_id}} ) {
                if ( defined($beancounters{$vmachine_id}{$resource}[4]) && defined($beancounters_old{$vmachine_id}{$resource}[4]) ){
                        my $failcnt=$beancounters{$vmachine_id}{$resource}[4];
                        my $failcnt_old=$beancounters_old{$vmachine_id}{$resource}[4];
                        my $held=$beancounters{$vmachine_id}{$resource}[0];
                        my $maxheld=$beancounters{$vmachine_id}{$resource}[1];
                        my $barrier=$beancounters{$vmachine_id}{$resource}[2];
                        my $limit=$beancounters{$vmachine_id}{$resource}[3];
                        if ( $failcnt_old < $failcnt ){
                                print "CRITICAL: Incrased failcnt  $vmachine_id: $resource from $failcnt_old to $failcnt (held->$held , maxheld->$maxheld , barrier->$barrier , limit->$limit ) " ;
                                $ret=2;
                        }
                }
        }

}

# if ($ret == 0 ) { print "Ok. \n" ; }
# print Dumper(%beancounters_old) ;
# print "\n";
exit($ret);
'

RET1=$?
fi

echo "$DATA" > $FILE
#####################################################################################
######### quota check
#####################################################################################

DATA=`snmpwalk   -v 3  -u $USER -l authPriv   -a MD5 -A $PASS -x DES -X $PASS $HOST:$PORT .1.3.6.1.4.1.2021.52.4 \
|  perl -ne '/"(.*)"/ ; print "$1\n" ;'`

if [ "$?" != "0" ]; then
        echo "Unknown snmp error"
        exit 1
fi


echo "$DATA" | perl  -n -e'
my $vid ;
my $ret=0 ;
while(<STDIN>){
        my %vid;
        if ( /\D*(\d+):.*/ ){ $vid=$1; }
        if ( /\s*(\S+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+).*/ ){
                $resource=$1 ;
                $usage=$2 ;
                $softlimit=$3 ;
                $hardlimit=$4 ;
                $time=$5 ;
                $expire=$6 ;
                if ( $usage >= $softlimit ){
                        print "WARNING: VZquota limit exceeded on $vid: $resource  usage->$usage, softlimit->$softlimit, hardlimit->$hardlimit, time->$time, expire->$expire  " ;
                        $ret=1;
                }
        }
}
exit($ret);
'
RET2=$?

#####################################################################################
########### return
#####################################################################################

if [  $RET1  -gt $RET2  ]; then
        RET=$RET1
        else
        RET=$RET2
fi

if [  $RET  = 0  ]; then
        echo Ok.
fi
exit $RET

nagios plugin/failcnt in python

#!/usr/bin/python
# Copyright (C) 2008 Christian Benke
# Distributed under the terms of the GNU General Public License v2
# v0.1 2008-04-03
# Christian Benke <benkokakao  gmail  com>

import string
import pickle
import sys
import getopt
import re
import smtplib
import socket

veid=''
current_data=dict()
opts=None
beancounter_data=open('/proc/user_beancounters','r')
picklefilepath='/tmp/beancounters_pickledump'

#-------- find the hostname for each veid ---:

def find_veid(veid):
        veid_conf=open('/etc/vz/conf/' + str(veid) + '.conf','r')
        for line in veid_conf:
                if "HOSTNAME" in line:
                        quotes=re.compile("\"")
                        line=quotes.sub("",line)
                        linefeed=re.compile("\n")
                        line=linefeed.sub("",line)
                        fqdn=re.split('=',line)
                        hostname=re.split('\.',fqdn[1])[0]
                        return hostname

# ---------- send mail in case of a counter-change
def send_mail(count_change):
        mailfrom = 'root@' + str(host)
        mailto = 'to@example.com'
        mailsubject = 'Beancounters changed in the last 5 minutes'
        mailbody = 'The Beancounter-failcnt value of the following veid(s) and resource(s) has \nincreased in the last 5 minutes:\n\n'
        server = smtplib.SMTP('localhost')
        server.sendmail(mailfrom, [mailto], '''\
From:''' + mailfrom + '''\
\nTo:''' + mailto + '''\
\nSubject:''' + mailsubject + '''\

\n''' + mailbody + count_change)
        server.quit()

#------------read raw and compare data from user_beancounters

def compare_data(beancounter_data,data_read,count):
        barrier_break=str()
        count_change=str()
        for line in beancounter_data:
                if 'Version' in line or 'uid' in line or 'dummy' in line:
                        continue
                else:
                        fields=line.split( )
                        if len(fields) == 7:
                                i=0
                                veid=int(fields[0][:-1])
                                fields.pop(0) #remove the first element
                                current_data[veid]=dict()
                                current_data[veid][fields[0]]=fields
                        else:
                                i=i+1
                                current_data[veid][fields[0]]=fields
                if data_read and count == True and data_read is not '0': #comparing counters of new data with previous run
                        if data_read[veid][fields[0]][5] < current_data[veid][fields[0]][5]:
                                if int(veid) != 0:
                                        hostname=find_veid(veid)
                                else:
                                        hostname='OpenVZ Hardware Node'
                                count_change=str(count_change) + str(hostname) + ': ' + str(fields[0]) + ' failcnt has changed from ' + data_read[veid][fields[0]][5]
 + ' to ' + str(current_data[veid][fields[0]][5]) + '\n'

                if count == False:      #comparing current level with barrier/limit
                        if current_data[veid][fields[0]][0] == 'oomguarpages': #for oomguarpages and physpages only the limit-value is relevant
                                if int(current_data[veid][fields[0]][1]) > int(current_data[veid][fields[0]][4])*0.9:
                                        barrier_break = str(barrier_break) + str(veid) + ': ' + str(current_data[veid][fields[0]][0]) + ' '
                        elif current_data[veid][fields[0]][0] == 'physpages':
                                if int(current_data[veid][fields[0]][1]) > int(current_data[veid][fields[0]][4])*0.9:
                                        barrier_break = str(barrier_break) + str(veid) + ': ' + str(current_data[veid][fields[0]][0]) + ' '
                        else:
                                if int(current_data[veid][fields[0]][1]) > int(current_data[veid][fields[0]][3])*0.9:
                                        barrier_break = str(barrier_break) + str(veid) + ': ' + str(current_data[veid][fields[0]][0]) + ' '
        if barrier_break and count == False:
                print barrier_break
                sys.exit(2)
        elif count == False:
                print 'All Beancounters OK'
                sys.exit(0)

        if count_change and count == True:
                send_mail(count_change)
                return current_data
        elif count == True:
                return current_data


# ----- pickle data - read or write

def pickle_data(current_data,action,count,picklefilepath):
        try:
                picklefile = None
                if action == 'write':
                        if current_data:
                                picklefile=open(picklefilepath,'w')
                                pickle.dump(current_data, picklefile)
                                picklefile.close()
                                return
                        else:
                                print 'current_data is empty: ' + str(current_data)
                elif action == 'read':
                        picklefile=open(picklefilepath,'r')
                        data_read=pickle.load(picklefile)
                        picklefile.close()
                        if data_read:
                                return data_read
                        else:
                                print 'DATA_READ IS NONE:' + str(data_read)
                                return data_read
        except IOError:
                current_data = compare_data(beancounter_data,'0',count)
                picklefile=open(picklefilepath,'w')
                pickle.dump(current_data,picklefile)
                picklefile.close()

# ------- print script usage

def usage(prog="check_beancounters.py"):
    print """
check_beancounters.py : Check if resource-values break barriers or limits and failcounters increase

 check_beancounters.py [-tfh]

 -h                  print this message

 -t                  Check if failcnt-values have increased since the last run
 -f                  Check if current value of a resource is higher than barrier/limit
 """


opts=getopt.getopt(sys.argv[1:], 'thf')
if opts:
        if opts[0]==[]:
                usage(); sys.exit(0)
        elif opts[0][0][0]=='-h':
                usage(); sys.exit(0)
        elif opts[0][0][0]=='-t':
                count=True
        elif opts[0][0][0]=='-f':
                count=False


data_read=pickle_data(current_data,'read',count,picklefilepath)
current_data = compare_data(beancounter_data,data_read,count)
pickle_data(current_data,'write',count,picklefilepath)