32
edits
Changes
→Caveat
* [[Download/kernel/2.6.27|2.6.27]] briullov.1 or later
* [[Download/kernel/rhel5|rhel5]] 064.4 or later
One other thing. I am not 100% sure about this but I think both the host and the container need to be running the same bit version OS. So both need to be 32bit or 64bit. That is what I found the one time I tried this running a 32bit container on a 64bit host.
==Howto==
slhc 10561 1 ppp_generic
* to make these HN changes persistent on reboot create a file called ''ppp.modules''. You can use any name you like but you must give it a ''.modules'' extension. The following method and directory location is applicable to CentOS v6. I am not sure about v5. The directory location may be different for that version.
HN # nano /etc/sysconfig/modules/ppp.modules
#!/bin/sh
/sbin/modprobe ppp_mppe
HN # chmod +x /etc/sysconfig/modules/ppp.modules
~�}#�!}!}!} }4}"}&} } } } }%}&)Q�}4}'}"}(}"p})
This will go on for about 30 seconds and then you will be returned to a command prompt. If there is an error message instead, something went wrong.
* From that point, you can finish your setup as in a real hardware environment.