Open main menu

OpenVZ Virtuozzo Containers Wiki β

Shared webhosting

Revision as of 09:31, 3 August 2006 by Hvdkamer (talk | contribs) (The solution)

Contents

The problem

Note: this is my first try to create an Wiki article. Please modify :-)

One of the problems with shared webhosting (i.e. different people with each his/her own webpages) is that modern script languages such as PHP, Python or Perl are to powerfull. For example take the following PHP script:

<?php

function get_content($filename) {
  $handle = fopen($filename, 'r');
  echo fread($handle, filesize($filename));
  fclose($handle);
}

get_content('/home/ppuk34/www/forum/config.inc.php');

?>

With PHP you could use open_basedir to prevent this, but there are more ways. For example PHP Shell, a script that is often mis-used by people with not-so-good intentions. Or think about the Santy-worm which mis-used phpBB. Again there is a solution in the form of safe_mode, but lots of PHP scripts break if you enable this. For Python, Perl or CGI-scripts there are no easy ways and you have to use wrappers or other tricks to chroot these. Most users don't want to hear about security (unless you show them how easy it is) and just want there scripts to work. Some do care, but his/her own server is much to expensive. And finally we didn't talk about hidden bugs in almost every security measure we mentioned. A knowledgeable person can almost certain find backdoors because of the vast amount of possibilities these scripting languages offer.

The solution

As said, you can waste hours of time in securing all the possible things you don't want in your shared webhosting environment. And unless you are very familiar with all the things modern scripting languages can do, you pronbably miss dozens of alternative routes. In this process you frustrate your clients, because security always means that legitimate things break. As a side effect of your hard work, you can waste hours of extra time in educating your users. But in the end most users don't care about security, unless they are themselve victims of a comprimised host. Learning the hard way is by far the most effective method.

Instead of the above route, we take a different approach. The main problem is that by its very nature all files which are served through the web are public. Apache for example uses only one account to read alle files. As said, you can use tricks with CGI wrappers to execute the scripting languages under its own credentials. However this kind of security depends on the wrappers ability to securely seperate the users. We all know that if this is broken — and most often it will be broken — the result is a higher clearance on the underlying filesystem. For most systems you need more than one wrapper, so the number of possible security problems grow. The ultimate user separation is in the kernel and you can view the modifications OpenVZ has done in this light. Instead of CGI wrappers we go one step higher and give every user its own minimal server. In the rest of this article we describe how shared webhosting with OpenVZ could be implemented.

Minimal server

Create an VEx with your favorite distro. Give it an internal IP-address in one of the ranges 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16. Then strip away all unessary init.d scripts so only the bare minimum is started. That means as a minimum syslogd and ssh so the account holder can upload his/her files through SCP/SFTP in his/her own minimal server. For this to work you need to set up destination NAT on VE0 from high numbered ports to port 22 on the given private IP address:

dnat="-j DNAT --to-destination"

iptables -t nat -P PREROUTING ACCEPT
iptables -t nat -A PREROUTING -p TCP --dport 10122 $dnat 192.168.13.101:22
iptables -t nat -A PREROUTING -p TCP --dport 10222 $dnat 192.168.13.102:22
...

The other thing you want for webhosting is of course a webserver as well. To minimize the amount of needed memory, we choose Lighttpd instead of the common Apache. Then configure the scripting language of your choice to run under this webserver. It is possible to use different languages/setups for different accounts as well. Also problematic CGI-scripts are not problematic anymore...

MySQL server

Most webhosting accounts use MySQL, but if you prefer another database server, go ahead. Create a new VEx with a lot more resources and again an internal IP-address. Now configure the accounts. As an extra security measure you can use the internal IP-address as well.

Proxy webserver

Because we have only one public IP-address, we need an trick to access every minimal server based on the hostname in the HTTP request. For SSH we used different ports, but that is not an option for websites. Again we create an VEx with an internal IP-address. On this server we install Lighttpd as well, because the proxying is very simple. If someone has an working example with Apache, please add. First we must forward port 80 to this server:

dnat="-j DNAT --to-destination"

iptables -t nat -P PREROUTING ACCEPT
iptables -t nat -A PREROUTING -p TCP -d <external IP-address> --dport 80 $dnat 192.168.13.11:80
iptables -t nat -A PREROUTING -p TCP --dport 10122 $dnat 192.168.13.101:22
iptables -t nat -A PREROUTING -p TCP --dport 10222 $dnat 192.168.13.102:22
...

Then we create for every website an section in /etc/lighttpd/lighttpd.conf as follows:

$HTTP["host"] == "ve101.armorica.tk" {
  proxy.server  = ( "" => ( ( "host" => "192.168.13.101" ) ) )
}

You can map more names to the same IP-address if needed. The last step is to add mod_proxy to the server.modules section.

Other applications

Create for other applications as mail, make sure that the minimal servers use this one for sending mail from webpages, DNS etc. VEx as needed. The resulting sever looks something lik this: