Sarge is no longer stable and has been replaced by Etch. This document needs to be updated for Etch and references  * References to Sarge need to be updated to use Etch instead. * Lenny is the new Debian testing. If you wish to continue to have a testing section listed, update it for Lenny. Otherwise remove the testing section.* Use the official Debian mirrors to get the OpenVZ packages. --[[User:Dusty|Dusty]] 19:26, 9 April 2007 (EDT) == Interface settings still give me an error. == I did an update on:  [...] # device: %DEV% iface %DEV% inet static address 192.168.0.2 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 '''up sysctl -w net.ipv4.conf.%DEV%.proxy_arp=100''' '''pre-down sysctl -w net.ipv4.conf.%DEV%.proxy_arp=0''' [...] since the debian docs (/usr/share/doc/vzctl/README.Debian) told me this were the right values, but now I get on starting/stopping a VE: vps-net_del WARNING: Function proxy_arp for eth0 is set to 0. Enable with 'sysctl -w net.ipv4.conf.eth0.proxy_arp=1'. See /usr/share/doc/vzctl/README.Debian. The previous settings (see history) also gave me errors: [...] # device: %DEV% iface %DEV% inet static address 192.168.0.2 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 '''up sysctl -w net.ipv4.conf.%DEV%.proxy_arp=0''' '''pre-down sysctl -w net.ipv4.conf.%DEV%.proxy_arp=1''' [...] Anybody got a clue what the right values are? --[[User:Vipz|Vipz]] 16:27, 29 May 2007 (EDT)  See http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&oldid=2629, forum entry http://forum.openvz.org/index.php?t=msg&goto=10089 and http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=387762 @vips: btw why have you change the settings to the buggy version of /usr/share/doc/vzctl/README.debian ? So try a up sysctl -w net.ipv4.conf.%DEV%.proxy_arp=1, not 100! --[[User:Curx|Curx]] 21:35, 29 May 2007 (EDT)  Because with the 'right' version I get this warning on starup/shutdown of a VE: vps-net_add WARNING: Function proxy_arp for eth0 is set to 0. Enable with 'sysctl -w net.ipv4.conf.eth0.proxy_arp=1'. See /usr/share/doc/vzctl/README.Debian. So I guessed the right values were in /usr/share/doc/vzctl/README.Debian. I didn't know these values were buggy. @Curx: got any idea how to get rid of this warning? --[[User:Vipz|Vipz]] 15:34, 30 May 2007 (EDT) == Installation on Debian 6 Squeeze (stable) == This document seems rather old, but I've been able to install OpenVZ without any prior knowledge of the subject on a debian stable (squeeze) fresh install, using only the default repositories and apt-get commands and the instructions for debian lenny. My point is that the article can be quite confusing and a simpler one could be written. And in case anybody needed to install openvz in an old debian version, you could keep a link to the current article. --[[Special:Contributions/95.21.175.189|95.21.175.189]] 16:20, 1 August 2011 (UTC)