User:Kako/check vpsconf ressources.sh

From OpenVZ Virtuozzo Containers Wiki
Revision as of 11:02, 12 August 2009 by Kako (talk | contribs) (First Version: $Id: check_vpsconf_ressources.sh,v 1.1 2009/08/12 10:54:49 thomas_c Exp $)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search 
#!/bin/bash
#
# This script should check all formulas writen down in 
# http://wiki.openvz.org/UBC_systemwide_configuration
# The result is 
# - human-readble
# - machine-readable (result-code)
#
# Conding infos:
# On the wiki-pages of openvz "soft limit/barier" and "hard limit/limit" are used often as sinonyms.
#   I used "soft" for "barier" and "hard" for "limit"
# Variable names are defined in dependence of their units 
#   *_b => bytes
#   *_kb => kilobytes
#   *_mb => megabytes
# Calculation is done with KB, but displayed are MB, because the numbers are smallers
#
# @author	Claudio Thomas, 2009
# @version	$Id: check_vpsconf_ressources.sh,v 1.1 2009/08/12 10:54:49 thomas_c Exp $
# @license	LGPL
# @see		http://wiki.openvz.org/UBC_systemwide_configuration
# @uses		egrep, grep, expr, bc, df, tr, cut (in other words, it should run on every linux server :-)
# @return 	0 - all OK, 1 - at least one warning
# ------------------------------------------------------------------
# Project/User specific values
VZVPS_PATH='/vz';			# Directory where die VPS files are hold (to find out amount of free disk space)

# OpenVZ Values
VZCONF_PATH='/etc/vz/conf';	# Directory where the VPS-configurations can be found
MAX_VAL='2147483647';		# Maximal/highest number in /proc/user_beancounters

# internal vars
w=0;
# ------------------------------------------------------------------
# Functions
# ------------------------------------------------------------------
function ok() {
	echo "\033[0;32mOK $1\033[0m";
}
function warn() {
	echo "\033[1;33mWARN $1\033[0m";
}
function err() {
	echo "\033[0;31mERR $1\033[0m";
}
function incWarnings() {
	w=`expr $w + 1`;
}
function checkDisk() {
	# DISKSPACE
	diskspaces=`egrep ^DISKSPACE $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	diskspace_real=`df -k $VZVPS_PATH | grep $VZVPS_PATH | tr -s " " |cut -d ' ' -f 2`
	sum_soft=0;
	sum_hard=0;
	for limit in $diskspaces; do
		soft=`echo $limit | cut -d ':' -f 1`;
		hard=`echo $limit | cut -d ':' -f 2`;
		sum_soft=`expr $sum_soft + $soft`;
		sum_hard=`expr $sum_hard + $hard`;
	done;
	echo -n "DISKPACE:  "; # Angabe in KBytes
	echo -en "\tSOFT: `expr $sum_soft / 1024` MB";
	echo -en "\tHARD: `expr $sum_hard / 1024` MB";
	echo -en "\tMAX : `expr $diskspace_real / 1024` MB";
	if [ "$sum_hard" -lt "$diskspace_real" ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 
	
	# DISKINODES
	diskinodes=`egrep ^DISKINODES $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	diskinode_real=`df -ki $VZVPS_PATH | grep $VZVPS_PATH | tr -s " " |cut -d ' ' -f 2`
	sum_soft=0;
	sum_hard=0;
	for limit in $diskinodes; do
		soft=`echo $limit | cut -d ':' -f 1`;
		hard=`echo $limit | cut -d ':' -f 2`;
		sum_soft=`expr $sum_soft + $soft`;
		sum_hard=`expr $sum_hard + $hard`;
	done;
	echo -n "DISKINODES: "; # Angabe in KBytes
	echo -en "\tSOFT: `expr $sum_soft / 1024` MB";
	echo -en "\tHARD: `expr $sum_hard / 1024` MB";
	echo -en "\tMAX : `expr $diskinode_real / 1024` MB";
	if [ "$sum_hard" -lt "$diskinode_real" ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 
}
function checkMem() {
	mem_real_kb=`cat /proc/meminfo | grep 'MemTotal' | tr -s ' ' | cut -d ' ' -f 2`
	lowmem_real_kb=`cat /proc/meminfo | grep 'LowTotal' | tr -s ' ' | cut -d ' ' -f 2`
	mem_real_mb=`expr $mem_real_kb / 1024` 
	lowmem_real_mb=`expr $lowmem_real_kb / 1024`
	 
	echo -e "TOTAL MEM:\t$mem_real_mb MB";
	#------------------
	# ---- LOW RAM ----
	# @see: http://wiki.openvz.org/UBC_systemwide_configuration#.E2.80.9CLow_memory.E2.80.9D
	RAM_kb=`echo "scale=4;0.4 * $lowmem_real_kb" | bc` 
	RAM_mb=`echo "scale=4;$RAM_kb / 1024" | bc` 
	echo -e "LOW MEM:\t$lowmem_real_mb MB (40% -> $RAM_mb MB)";
	
	# ALLSOCKETBUF LIMIT = tcprcvbuf+tcpsndbuf+dgramrcvbuf+othersockbuf
	tcprcvbuf_b=`egrep ^TCPRCVBUF $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	tcpsndbuf_b=`egrep ^TCPSNDBUF $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	dgramrcvbuf_b=`egrep ^DGRAMRCVBUF $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	othersockbuf_b=`egrep ^OTHERSOCKBUF $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	sum_soft_b=0;
	sum_hard_b=0;
	for limit in $tcprcvbuf_b; do 
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;
	for limit in $tcpsndbuf_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;
	for limit in $dgramrcvbuf_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;
	for limit in $othersockbuf_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;	
	# ALLSOCKETBUF current = tcprcvbuf+tcpsndbuf+dgramrcvbuf+othersockbuf
	tcprcvbuf_b=`grep tcprcvbuf /proc/user_beancounters | grep -v $MAX_VAL | tr -s ' ' | cut -d ' ' -f 3`
	tcpsndbuf_b=`grep tcpsndbuf /proc/user_beancounters | grep -v $MAX_VAL | tr -s ' ' | cut -d ' ' -f 3`
	dgramrcvbuf_b=`grep dgramrcvbuf /proc/user_beancounters | grep -v $MAX_VAL | tr -s ' ' | cut -d ' ' -f 3`
	othersockbuf_b=`grep othersockbuf /proc/user_beancounters | grep -v $MAX_VAL | tr -s ' ' | cut -d ' ' -f 3`
	sum_cur_b=0;
	for current in $tcprcvbuf_b; do 
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	for current in $tcpsndbuf_b; do
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	for current in $dgramrcvbuf_b; do
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	for current in $othersockbuf_b; do
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;	
	# normalize (Values were in Byte, so convert to KB)
	sum_soft_kb=`expr $sum_soft_b / 1024`;
	sum_hard_kb=`expr $sum_hard_b / 1024`;
	sum_cur_kb=`expr $sum_cur_b / 1024`;
	ALLSOCKETBUF_soft_kb=$sum_soft_kb;
	ALLSOCKETBUF_hard_kb=$sum_hard_kb;
	ALLSOCKETBUF_cur_kb=$sum_cur_kb;
	ALLSOCKETBUF_soft_mb=`echo "scale=2;$ALLSOCKETBUF_soft_kb / 1024" | bc`
	ALLSOCKETBUF_hard_mb=`echo "scale=2;$ALLSOCKETBUF_hard_kb / 1024" | bc`
	ALLSOCKETBUF_cur_mb=`echo "scale=2;$ALLSOCKETBUF_cur_kb / 1024" | bc`
	echo -n "-ALLSOCKETBUF: "; 
	echo -en "\tSOFT: $ALLSOCKETBUF_soft_mb MB";
	echo -en "\tHARD: $ALLSOCKETBUF_hard_mb MB";
	echo -e "\tCurrent: $ALLSOCKETBUF_cur_mb MB";
	
	# KMEMSIZE LIMIT
	kmemsize_b=`egrep ^KMEMSIZE $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	sum_soft_b=0;
	sum_hard_b=0;
	for limit in $kmemsize_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;
	# KMEMSIZE current
	kmemsize_b=`grep kmemsize /proc/user_beancounters | grep -v '0:' | tr -s ' ' | cut -d ' ' -f 4`
	sum_cur_b=0;
	for current in $kmemsize_b; do
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	# normalize (Values were in Byte, so convert to KB)
	sum_soft_kb=`expr $sum_soft_b / 1024`;
	sum_hard_kb=`expr $sum_hard_b / 1024`;
	sum_cur_kb=`expr $sum_cur_b / 1024`;
	KMEMSIZE_soft_kb=$sum_soft_kb;
	KMEMSIZE_hard_kb=$sum_hard_kb;
	KMEMSIZE_cur_kb=$sum_cur_kb;
	KMEMSIZE_soft_mb=`echo "scale=2;$KMEMSIZE_soft_kb / 1024" | bc`
	KMEMSIZE_hard_mb=`echo "scale=2;$KMEMSIZE_hard_kb / 1024" | bc`
	KMEMSIZE_cur_mb=`echo "scale=2;$KMEMSIZE_cur_kb / 1024" | bc`
	echo -n "-KMEMSIZE: "; 
	echo -en "\tSOFT: $KMEMSIZE_soft_mb MB";
	echo -en "\tHARD: $KMEMSIZE_hard_mb MB";
	echo -e "\tCurrent: $KMEMSIZE_cur_mb MB";

	level=`echo "scale=4;( $KMEMSIZE_cur_kb + $ALLSOCKETBUF_cur_kb ) / $RAM_kb" | bc`
	echo -en "  LowMem Utilization: ($KMEMSIZE_cur_mb + $ALLSOCKETBUF_cur_mb) / $RAM_mb  \t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 	
	level=`echo "scale=4;( $KMEMSIZE_hard_kb + $ALLSOCKETBUF_hard_kb ) / $RAM_kb" | bc`
	echo -en "  LowMem Commitment:  ($KMEMSIZE_hard_mb + $ALLSOCKETBUF_hard_mb) / $RAM_mb\t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 

	#------------------
	#---- TOTAL RAM ----
	# @see: http://wiki.openvz.org/UBC_systemwide_configuration#Total_RAM
	physpages_b=`grep physpages /proc/user_beancounters | grep -v '$MAX_VAL $MAX_VAL' | tr -s ' ' | cut -d ' ' -f 3`
	sum_cur=0;
	for current in $physpages_b; do
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	# normalize (Values were in Byte, so convert to KB)
	sum_cur_kb=`expr $sum_cur_b / 1024`;
	PHYSPAGES_cur_kb=$sum_cur_kb;
	PHYSPAGES_cur_mb=`echo "scale=2;$PHYSPAGES_cur_kb / 1024" | bc`
	amount_kb=`expr $PHYSPAGES_cur_kb + $KMEMSIZE_cur_kb + $ALLSOCKETBUF_cur_kb`
	amount_mb=`expr $amount_kb / 1024`;
	level=`echo "scale=4;$amount_kb / $mem_real_kb" | bc`
	echo -en "  TotMem Utilization: ($PHYSPAGES_cur_mb + $KMEMSIZE_cur_mb + $ALLSOCKETBUF_cur_mb) / $mem_real_mb\t=> $amount_mb MB / $mem_real_mb MB ($level Level)";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn`"; incWarnings; fi
	
	#------------------
	#---- RAM+SWAP ----
	# @see: http://wiki.openvz.org/UBC_systemwide_configuration#Memory_and_swap_space
	swapmem_real_kb=`cat /proc/meminfo | grep 'SwapTotal' | tr -s ' ' | cut -d ' ' -f 2`
	swapmem_real_mb=`expr $swapmem_real_kb / 1024` 
	echo "";
	echo -en "Swap MEM:\t$swapmem_real_mb MB";
	mem4_kb=`expr 4 \* $mem_real_kb`
	if [ "$swapmem_real_kb" -lt "$mem4_kb" ]; then 
		if [ "$mem_real_kb" -lt "$swapmem_real_kb" ]; then echo -e "\t-- `ok`";
	else echo -e "\t-- `warn '!!! Swap should be > Total Mem'`"; incWarnings; fi
	else echo -e "\t-- `warn '!!! Swap should be < 4*Total Mem'`"; incWarnings; fi 	
	
	# OOMGUARPAGES LIMIT
	oomguarpages_b=`egrep ^OOMGUARPAGES $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	sum_soft_b=0;
	sum_hard_b=0;
	for limit in $oomguarpages_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;	
	oomguarpages_b=`grep oomguarpages /proc/user_beancounters | grep -v '2147483647 2147483647' | tr -s ' ' | cut -d ' ' -f 3`;
 	sum_cur_b=0;
	for current in $oomguarpages_b; do 
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	# normalize (Values were in Byte, so convert to KB)
	sum_cur_kb=`expr $sum_cur_b / 1024`;
	OOMGUARPAGES_soft_kb=$sum_soft_kb;
	OOMGUARPAGES_hard_kb=$sum_hard_kb;
	OOMGUARPAGES_cur_kb=$sum_cur_kb;
	OOMGUARPAGES_soft_mb=`echo "scale=2;$OOMGUARPAGES_soft_kb / 1024" | bc`
	OOMGUARPAGES_hard_mb=`echo "scale=2;$OOMGUARPAGES_hard_kb / 1024" | bc`
	OOMGUARPAGES_cur_mb=`echo "scale=2;$OOMGUARPAGES_cur_kb / 1024" | bc`
	echo -n "-OOMGUARPAGES: "; 
	echo -en "\tSOFT: $OOMGUARPAGES_soft_mb MB";
	echo -en "\tHARD: $OOMGUARPAGES_hard_mb MB";
	echo -e "\tCurrent: $OOMGUARPAGES_cur_mb MB";

	level=`echo "scale=4;( $OOMGUARPAGES_cur_kb + $KMEMSIZE_cur_kb + $ALLSOCKETBUF_cur_kb ) / ( $RAM_kb + swapmem_real_kb )" | bc`
	echo -en "  Swap Utilization: ($OOMGUARPAGES_cur_mb + $KMEMSIZE_cur_mb + $ALLSOCKETBUF_cur_mb) / ($RAM_mb + $swapmem_real_mb) \t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 	
	level=`echo "scale=4;( $OOMGUARPAGES_hard_kb + $KMEMSIZE_hard_kb + $ALLSOCKETBUF_hard_kb ) / ( $RAM_kb + swapmem_real_kb )" | bc`
	echo -en "  Swap Commitment:  ($OOMGUARPAGES_hard_mb + $KMEMSIZE_hard_mb + $ALLSOCKETBUF_hard_mb) / ($RAM_mb + $swapmem_real_mb) \t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 

	#--------------------------
	#---- Allocated Memory ----
	# @see: http://wiki.openvz.org/UBC_systemwide_configuration#Allocated_memory
	# PRIVVMPAGES LIMIT
	privvmpages_b=`egrep ^PRIVVMPAGES $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	sum_soft_b=0;
	sum_hard_b=0;
	for limit in $privvmpages_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;	
	privvmpages_b=`grep privvmpages /proc/user_beancounters | grep -v '2147483647 2147483647' | tr -s ' ' | cut -d ' ' -f 3`;
 	sum_cur_b=0;
	for current in $privvmpages_b; do 
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	# normalize (Values were in Byte, so convert to KB)
	sum_cur_kb=`expr $sum_cur_b / 1024`;
	PRIVVMPAGES_soft_kb=$sum_soft_kb;
	PRIVVMPAGES_hard_kb=$sum_hard_kb;
	PRIVVMPAGES_cur_kb=$sum_cur_kb;
	PRIVVMPAGES_soft_mb=`echo "scale=2;$PRIVVMPAGES_soft_kb / 1024" | bc`
	PRIVVMPAGES_hard_mb=`echo "scale=2;$PRIVVMPAGES_hard_kb / 1024" | bc`
	PRIVVMPAGES_cur_mb=`echo "scale=2;$PRIVVMPAGES_cur_kb / 1024" | bc`
	echo -n "-PRIVVMPAGES: "; 
	echo -en "\tSOFT: $PRIVVMPAGES_soft_mb MB";
	echo -en "\tHARD: $PRIVVMPAGES_hard_mb MB";
	echo -e "\tCurrent: $PRIVVMPAGES_cur_mb MB";

	# VMGUARPAGES LIMIT
	vmguarpages_b=`egrep ^VMGUARPAGES $VZCONF_PATH/*.conf | cut -d '"' -f 2`
	sum_soft_b=0;
	sum_hard_b=0;
	for limit in $vmguarpages_b; do
		soft_b=`echo $limit | cut -d ':' -f 1`;
		hard_b=`echo $limit | cut -d ':' -f 2`;
		sum_soft_b=`expr $sum_soft_b + $soft_b`;
		sum_hard_b=`expr $sum_hard_b + $hard_b`;
	done;	
	vmguarpages_b=`grep vmguarpages /proc/user_beancounters | grep -v '2147483647 2147483647' | tr -s ' ' | cut -d ' ' -f 3`;
 	sum_cur_b=0;
	for current in $vmguarpages_b; do 
		sum_cur_b=`expr $sum_cur_b + $current`;
	done;
	# normalize (Values were in Byte, so convert to KB)
	sum_cur_kb=`expr $sum_cur_b / 1024`;
	VMGUARPAGES_soft_kb=$sum_soft_kb;
	VMGUARPAGES_hard_kb=$sum_hard_kb;
	VMGUARPAGES_cur_kb=$sum_cur_kb;
	VMGUARPAGES_soft_mb=`echo "scale=2;$VMGUARPAGES_soft_kb / 1024" | bc`
	VMGUARPAGES_hard_mb=`echo "scale=2;$VMGUARPAGES_hard_kb / 1024" | bc`
	VMGUARPAGES_cur_mb=`echo "scale=2;$VMGUARPAGES_cur_kb / 1024" | bc`
	echo -n "-VMGUARPAGES: "; 
	echo -en "\tSOFT: $VMGUARPAGES_soft_mb MB";
	echo -en "\tHARD: $VMGUARPAGES_hard_mb MB";
	echo -e "\tCurrent: $VMGUARPAGES_cur_mb MB";

	level=`echo "scale=4;( ($PRIVVMPAGES_cur_kb*4096) + $KMEMSIZE_cur_kb + $ALLSOCKETBUF_cur_kb ) / ( $RAM_kb + swapmem_real_kb )" | bc`
	echo -en "  Alloc Utilization: (($PRIVVMPAGES_cur_mb*4096) + $KMEMSIZE_cur_mb + $ALLSOCKETBUF_cur_mb) / ($RAM_mb + $swapmem_real_mb) \t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 	
	level=`echo "scale=4;( $VMGUARPAGES_soft_kb + $KMEMSIZE_hard_kb + $ALLSOCKETBUF_hard_kb ) / ( $RAM_kb + swapmem_real_kb )" | bc`
	echo -en "  Alloc Commitment:  (($VMGUARPAGES_soft_kb*4096) + $KMEMSIZE_hard_mb + $ALLSOCKETBUF_hard_mb) / ($RAM_mb + $swapmem_real_mb) \t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 
	level=`echo "scale=4;( $PRIVVMPAGES_hard_kb + $KMEMSIZE_hard_kb + $ALLSOCKETBUF_hard_kb ) / ( $RAM_kb + swapmem_real_kb )" | bc`
	echo -en "  Alloc limit:  (($PRIVVMPAGES_hard_mb*4096) + $KMEMSIZE_hard_mb + $ALLSOCKETBUF_hard_mb) / ($RAM_mb + $swapmem_real_mb) \t\t=> $level Level";
	st=`echo "$level < 1" | bc`;
	if [ $st -eq 1 ]; then echo -e "\t-- `ok`"; else echo -e "\t-- `warn '!!!'`"; incWarnings; fi 

}
	
# ------------------------------------------------------------------
# MAIN
# ------------------------------------------------------------------
echo "INFO: See near informations to calculation and values at";
echo "      http://wiki.openvz.org/UBC_systemwide_configuration";
echo "";
echo "Harddisk check:";
echo "----------------------------------------------";
checkDisk;
echo "";
echo "Memory check: (level < 1 OK)";
echo "----------------------------------------------";
checkMem;

	
echo "";
if [ "$w" -gt "0" ]; then 
	echo -e "`warn`: $w warnings were diplayed. Check the output.";
	exit 1; 
fi
echo -e "`ok`: All paremeters seems to have good values.";
exit 0;
Retrieved from "https://wiki.openvz.org/index.php?title=User:Kako/check_vpsconf_ressources.sh&oldid=7470"