7
edits
Changes
→An OpenVZ Hardware Node has two Ethernet interfaces
Let's assign eth0 for the external traffic and eth1 for the local one.
If there is no need to make the VE accessible from the HN and vice versa, it's enough to replace 'br0' and 'eth0' with 'br1' and 'eth1' in the following steps of the above configuration:
* Hardware Node configuration → [[Using_private_IPs_for_Hardware_Nodes#Assign_the_IP_to_the_bridge|Assign the IP to the bridge]]
* Hardware Node configuration → [[Using_private_IPs_for_Hardware_Nodes#Resurrect_the_default_routing|Resurrect the default routing]]
