Difference between revisions of "Installation on Debian/old"

From OpenVZ Virtuozzo Containers Wiki
Jump to: navigation, search
m (distro -> repo)
(add a big fat warning)
 
(151 intermediate revisions by 57 users not shown)
Line 1: Line 1:
OpenVZ is now a part of Debian Sid (a.k.a. "unstable") repository. This article describes how to install OpenVZ on a Debian Sid system.
+
{{Warning|The majority of the content on this page only applies to older, unsupported Debian versions and is archived on this page for historical reasons only. '''The page you need is [[Installation on Debian]].'''}}
  
== Installing the utilities and kernel patch ==
+
OpenVZ consists of a kernel, user-level tools, and container templates.
 +
 
 +
This guide tells how to install the kernel and the tools on [http://www.debian.org Debian] Etch or Lenny/Squeeze.
 +
 
 +
For Squeeze, use the Lenny directions.
 +
 
 +
For Wheezy (7.0), use the vzctl package included in wheezy, together with the Wheezy OpenVZ kernels from [http://download.openvz.org/debian/ http://download.openvz.org/debian/].  Alternatively reduced functionality may be possible using the stock Debian Wheezy kernel (based on kernel.org version 3.2) and [[Vzctl_for_upstream_kernel]].
 +
 
 +
You may also wish to check the information on [http://wiki.debian.org/OpenVz the Debian wiki].
 +
 
 +
For Etch users, this document explains how to partially upgrade to Debian Lenny and install from lenny repositories ('''use this options at your risk''').
 +
 
 +
== Requirements ==
 +
 
 +
=== Filesystems ===
 +
It's recommended that you use a separate partition for container private
 +
directories (by default <code>/var/lib/vz/private/<CTID></code>). The reason for this is that if you wish to use the OpenVZ per-container disk quota, you won't be able to use usual Linux disk quotas on the same partition. Bear in mind that "per-container quota" in this context includes not only pure per-container quota but also the usual Linux disk quota used in container, not on the [[HN]].
 +
 
 +
At the very least try to avoid using the root partition for containers, because the root user of a container will be able to overcome the 5% disk space barrier in some situations. If the HN root partition is completely filled, it will break the system.
 +
 
 +
OpenVZ per-container disk quota is supported only for ext2/ext3 filesystems; therefore it makes sense to use one of these filesystems (ext3 is recommended) if you need per-container disk quota.
 +
 
 +
=== Repository setup (Etch only) ===
 +
 
 +
'''If you are using Debian Lenny, this step in no longer required. Openvz kernel packages and tools are available on main repository.'''
 +
 
 +
==== 1. Using openvz.org repositories ====
 +
 
 +
At the moment two different repositories are online at http://download.openvz.org:
 +
 
 +
; by Ola Lundqvist <opal@debian.org>
 +
: (OpenVZ kernels only)
 +
: apt-uri http://download.openvz.org/debian
 +
 
 +
; by Thorsten Schifferdecker <tsd@debian.systs.org>
 +
: apt-uri http://download.openvz.org/debian-systs
 +
: (Mirror of OpenVZ Repository from http://debian.systs.org/)
 +
 
 +
{{Note|The next steps use the repository at http://download.openvz.org/debian-systs; the actual OpenVZ Tools for Debian exist only as unstable builds, see http://packages.debian.org/vzctl}}
 +
 
 +
{{Note|By default, on Ubuntu systems root tasks are executed with [https://help.ubuntu.com/community/RootSudo sudo]}}
 +
 
 +
This can be done via the following commands, as root or as privileged "sudo" user
 +
<pre>
 +
# echo -e "\ndeb http://download.openvz.org/debian-systs etch openvz" >> /etc/apt/sources.list
 +
# wget -q http://download.openvz.org/debian-systs/dso_archiv_signing_key.asc -O- | apt-key add - && apt-get update
 +
</pre>
 +
 
 +
==== 2. Using Debian repositories (upgrade to lenny) ====
 +
 
 +
There is even a '''lenny''' repository with kernel 2.6.28. '''Use it at your own risk!'''
 +
 
 +
Add lenny repositories to your '''/etc/apt/sources.list'''
 +
<pre>
 +
deb http://DEBIAN-MIRROR/debian/ testing main
 +
deb http://DEBIAN-MIRROR/debian-security/ testing/updates main
 +
</pre>
 +
 
 +
Enlarge apt-cache adding to '''/etc/apt/apt.conf''' this line:
 +
<pre>
 +
APT::Cache-Limit "100000000";
 +
</pre>
 +
 
 +
Give etch package priority over lenny packages. Edit '''/etc/apt/preferences''' and set like this:
 +
<pre>
 +
Package: *
 +
Pin: release a=etch
 +
Pin-Priority: 700
 +
 
 +
Package: *
 +
Pin: release a=lenny
 +
Pin-Priority: 650
 +
</pre>
 +
 
 +
Then '''apt-get update && apt-get dist-upgrade''' to upgrade to lenny.
 +
 
 +
== Kernel installation ==
 +
 
 +
=== Wheezy and Lenny ===
 +
 
 +
{{Note|The best kernel to use is [[Download/kernel/rhel6|RHEL6-based]]. Please see [[Install_kernel_from_RPM_on_Debian_6.0]]}}
 +
 
 +
=== Etch ===
 +
 
 +
==== 1. Using openvz kernel repositories ====
 +
 
 +
{{Note|In case you want to recompile the OpenVZ kernel yourself on Debian, see [[Compiling the OpenVZ kernel (the Debian way)]].}}
 +
 
 +
First, you need to choose what kernel you want to install.
 +
 
 +
{| class="wikitable"
 +
|+'''OpenVZ Kernel list built with kernel config from http://download.openvz.org'''
 +
! Kernel !! Description !! Hardware !! Debian Architecture
 +
|-
 +
! ovzkernel-2.6.18
 +
| uniprocessor
 +
| up to 4GB of RAM
 +
| i386 and amd64
 +
|-
 +
! ovzkernel-2.6.18-smp
 +
| symmetric multiprocessor
 +
| up to 4 GB of RAM
 +
| i386 and amd64
 +
|-
 +
! ovzkernel-2.6.18-enterprise
 +
| SMP + PAE support + 4/4GB split
 +
| up to 64 GB of RAM
 +
| i386 only
 +
|}
 +
 
 +
{| class="wikitable"
 +
|+'''OpenVZ Kernel list built with official Debian kernel config and OpenVZ Settings'''
 +
! Kernel !! Description !! Hardware !! Debian Architecture
 +
|-
 +
! fzakernel-2.6.18-686
 +
| uni- and multiprocessor
 +
| up to 4GB of RAM
 +
| i386
 +
|-
 +
! fzakernel-2.6.18-686-bigmem
 +
| symmetric multiprocessor
 +
| up to 64 GB of RAM
 +
| i386
 +
|-
 +
! fzakernel-2.6.18-amd64
 +
| uni- and multiprocessor
 +
|
 +
| amd64
 +
|-
 +
|}
  
To install OpenVZ utilities, run the following:
 
 
<pre>
 
<pre>
apt-get update
+
# apt-get install <kernel>
apt-get install kernel-patch-openvz
 
 
</pre>
 
</pre>
  
Utilities will be installed since kernel-patch requires them.
+
===== Configuring the bootloader =====
  
== Creating the kernel package ==
+
In case GRUB is used as the boot loader, it will be configured automatically, or execute update-grub; lines similar to these will be added to the <tt>/boot/grub/menu.lst</tt> file:
  
To create a kernel package, you need to download and unpack 2.6.16 “vanilla” kernel first:
 
 
<pre>
 
<pre>
cd /usr/src/
+
[...]
wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.16.tar.bz2
+
  title          Debian GNU/Linux, kernel 2.6.18-ovz-028stab051.1-686
tar cjf linux-2.6.16.tar.bz2
+
  root            (hd0,1)
cd linux-2.6.16
+
  kernel         /vmlinuz-2.6.18-ovz-028stab051.1-686 root=/dev/sda5 ro vga=791
 +
  initrd          /initrd.img-2.6.18-ovz-028stab051.1-686
 +
  savedefault
 +
[...]
 
</pre>
 
</pre>
  
Next, get the proper kernel config from [http://download.openvz.org/kernel/devel/026test015.1/configs/ download.openvz.org]. Below is the example of using smp config for i686:
+
{{Note|per default on debian/ubuntu, a 2.6.22 kernel will boot before a 2.6.18, please check manually the grub boot order. See man update-grub for more details}}
  
 +
===== Installing the user-level tools =====
 +
 +
OpenVZ needs some user-level tools installed. Those are:
 +
 +
; vzctl
 +
: A utility to control OpenVZ containers (create, destroy, start, stop, set parameters etc.)
 +
; vzquota
 +
: A utility to manage quotas for containers. Mostly used indirectly (by vzctl).
 +
 +
<pre>
 +
# [sudo] apt-get install vzctl vzquota
 +
</pre>
 +
 +
==== 2 Using Debian lenny repositories ====
 +
 +
If you upgrade to lenny, you can search openvz kernel and can install with:
 +
<pre>
 +
apt-get install linux-image-openvz-686
 +
</pre>
 +
this command will install latest kernel and all required packages like:
 
<pre>
 
<pre>
wget http://download.openvz.org/kernel/devel/026test015.1/configs/kernel-2.6.16-026test015-i686-smp.config.ovz
+
apt-get install iproute libatm1 linux-image-2.6.26-1-openvz-686 linux-image-openvz-686 rsync vzctl vzquota libcgroup-dev
mv kernel-2.6.16-026test015-i686-smp.config.ovz .config
 
 
</pre>
 
</pre>
 +
and will arrange grub bootloader properly.
 +
 +
=== Rebooting into OpenVZ kernel ===
 +
 +
{{Warning|Before you restart your Server, verify that your system has all needed modules enabled in order to boot your harddisk (e.g. hardware modules, raid system(s), lvm2 etc). You may need an INITRD (initramdisk) or to compile needed kernel modules statically.}}
  
{{Note|example shows getting the config for 026test015 kernel. If you have a different kernel (kernel-patch-openvz), choose the corresponding config.}
+
Now reboot the machine and choose the OpenVZ Linux Kernel on the boot loader menu. If the OpenVZ kernel has been booted successfully, proceed to installing the user-level tools for OpenVZ.
  
Now you can apply openvz kernel patch and compile the kernel:
+
=== Confirm proper installation ===
  
 +
1. Kernel:
 
<pre>
 
<pre>
make-kpkg --added_patches openvz
+
# uname -r
 +
2.6.26-1-openvz-686
 +
#
 
</pre>
 
</pre>
 +
 +
2. Openvz kernel facility:
 +
<pre>
 +
# ps ax | grep vz
 +
2349 ?        S      0:00 [vzmond]
 +
</pre>
 +
 +
3. A network interface for containers:
 +
<pre>
 +
# ifconfig
 +
venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 
 +
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
 +
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 +
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 +
          collisions:0 txqueuelen:0
 +
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 +
</pre>
 +
 +
== Configuring ==
 +
 +
=== sysctl ===
 +
 +
There are a number of kernel parameters that should be set for OpenVZ to work correctly. These parameters are stored in <tt>/etc/sysctl.conf</tt> file. Here is the relevant part of the file; please edit it accordingly.
 +
 +
{{Note|vzctl version from debian-systs, automatically inserts these options at the last of <tt>/etc/sysctl.conf</tt>, except for net.ipv4.ip_forward}}
 +
 +
<pre>
 +
[...]
 +
 +
# On Hardware Node we generally need
 +
# packet forwarding enabled and proxy arp disabled
 +
 +
net.ipv4.conf.default.forwarding=1
 +
net.ipv4.conf.default.proxy_arp=0
 +
net.ipv4.ip_forward=1
 +
 +
# Enables source route verification
 +
net.ipv4.conf.all.rp_filter=1
 +
 +
# Enables the magic-sysrq key
 +
kernel.sysrq=1
 +
 +
# TCP Explict Congestion Notification
 +
#net.ipv4.tcp_ecn=0
 +
 +
# we do not want all our interfaces to send redirects
 +
net.ipv4.conf.default.send_redirects=1
 +
net.ipv4.conf.all.send_redirects=0
 +
 +
[...]
 +
</pre>
 +
 +
  # [sudo] sysctl -p
 +
 +
{{Note|You can make a symlink from /var/lib/vz to /vz as backward
 +
compatibility to OpenVZ as installed in other distributions
 +
(Debian vz root directory is /var/lib/vz to be FHS-compliant.}}
 +
 +
  # [sudo] ln -s /var/lib/vz /vz
 +
 +
=== OS templates ===
 +
 +
{{Note|Support of OS templates on 64 bit hosts is somewhat limited for the time being, so that not all tools or features are available - please see [[Making template tools to work on x86_64]] and [[Install OpenVZ on a x86 64 system Centos-Fedora]] for additional details and information on possible workarounds}}
 +
 +
To install a container, you need OS template(s).
 +
 +
Precreated templates can be found [http://wiki.openvz.org/Download/template/precreated here] and [http://download.openvz.org/contrib/template/precreated/ here].
 +
 +
You can create your own templates, see
 +
[[Debian template creation]], [[Ubuntu Gutsy template creation]] and [[:Category: Templates]].
 +
 +
{{Note|Setup your prefered standard OS Template : edit the /etc/vz/vz.conf}}
 +
 +
  # [sudo] apt-get install vzctl-ostmpl-debian-5.0-i386-minimal
 +
 +
== Additional User Tools ==
 +
 +
; vzprocps
 +
:    A set of utilities to provide system information (vzps and vztop)
 +
 +
; [[vzdump]]
 +
:    A utility to backup and restore container.
 +
 +
  # [sudo] apt-get install vzprocps vzdump
 +
 +
 +
On Debian squeeze, vzdump seems packaged in standard aptline. For lenny, See [[Backup_of_a_running_container_with_vzdump]]
 +
 +
 +
== Secure it ==
 +
 +
If you want to secure your container with individual firewall rules (instead or additionally to securing the host node) then you must run iptables inside the container. This works slightly different than on a physical server. So make sure that you check that iptables rules are indeed applied as expected inside the container.
 +
 +
Iptables modules required by the container must be specified in the general vz.conf file or the vzXXX.conf file of the container.
 +
 +
Add the following line into vz.conf to activate the respective iptables modules for all containers.
 +
 +
IPTABLES="ip_tables ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl
 +
ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_LOG ipt_conntrack ipt_helper ipt_state iptable_nat ip_nat_ftp ip_nat_irc ipt_TOS"
 +
 +
[[http://wiki.debian.org/DebianFirewall][Configure]] your iptable rules inside the container.
 +
 +
{{Warning|Note that iptables rules inside the container are not applied automatically as on a physical server by starting the iptables module! Follow the instructions below}}
 +
 +
To make sure the iptables rules are applied on a startup/reboot we'll create a new file:
 +
 +
nano /etc/network/if-pre-up.d/iptables
 +
 +
Add these lines to it:
 +
 +
#!/bin/bash
 +
/sbin/iptables-restore < /etc/iptables.up.rules
 +
 +
The file needs to be executable so change the permissions:
 +
 +
chmod +x /etc/network/if-pre-up.d/iptables
 +
 +
Start iptables
 +
 +
/etc/init.d/iptables start
 +
 +
If the startup shows errors then you have probably not activated the needed iptables modules. See above.
 +
 +
Check inside the container that your iptables rules are indeed applied:
 +
 +
iptables -L
 +
 +
If the rules do not show up as you would expect on a physical server then you might not have activated the needed iptables modules.
 +
 +
== Start it! ==
 +
 +
# [sudo] /etc/init.d/vz start
 +
 +
This does not make the vz system automatically start at boot time.  For automatic start:
 +
 +
# [sudo] update-rc.d vz defaults 98
 +
 +
== Use it! ==
 +
 +
After installing the OpenVZ kernel, user tools and a minimal OS template
 +
to create a first container and do some [[basic operations in OpenVZ environment]]. Read the [[download:doc/OpenVZ-Users-Guide.pdf]], browse this wiki.
  
 
[[Category: HOWTO]]
 
[[Category: HOWTO]]
 +
[[Category: Debian]]
 
[[Category: Installation]]
 
[[Category: Installation]]

Latest revision as of 20:30, 8 October 2013

Warning.svg Warning: The majority of the content on this page only applies to older, unsupported Debian versions and is archived on this page for historical reasons only. The page you need is Installation on Debian.

OpenVZ consists of a kernel, user-level tools, and container templates.

This guide tells how to install the kernel and the tools on Debian Etch or Lenny/Squeeze.

For Squeeze, use the Lenny directions.

For Wheezy (7.0), use the vzctl package included in wheezy, together with the Wheezy OpenVZ kernels from http://download.openvz.org/debian/. Alternatively reduced functionality may be possible using the stock Debian Wheezy kernel (based on kernel.org version 3.2) and Vzctl_for_upstream_kernel.

You may also wish to check the information on the Debian wiki.

For Etch users, this document explains how to partially upgrade to Debian Lenny and install from lenny repositories (use this options at your risk).

Requirements[edit]

Filesystems[edit]

It's recommended that you use a separate partition for container private directories (by default /var/lib/vz/private/<CTID>). The reason for this is that if you wish to use the OpenVZ per-container disk quota, you won't be able to use usual Linux disk quotas on the same partition. Bear in mind that "per-container quota" in this context includes not only pure per-container quota but also the usual Linux disk quota used in container, not on the HN.

At the very least try to avoid using the root partition for containers, because the root user of a container will be able to overcome the 5% disk space barrier in some situations. If the HN root partition is completely filled, it will break the system.

OpenVZ per-container disk quota is supported only for ext2/ext3 filesystems; therefore it makes sense to use one of these filesystems (ext3 is recommended) if you need per-container disk quota.

Repository setup (Etch only)[edit]

If you are using Debian Lenny, this step in no longer required. Openvz kernel packages and tools are available on main repository.

1. Using openvz.org repositories[edit]

At the moment two different repositories are online at http://download.openvz.org:

by Ola Lundqvist <opal@debian.org>
(OpenVZ kernels only)
apt-uri http://download.openvz.org/debian
by Thorsten Schifferdecker <tsd@debian.systs.org>
apt-uri http://download.openvz.org/debian-systs
(Mirror of OpenVZ Repository from http://debian.systs.org/)
Yellowpin.svg Note: The next steps use the repository at http://download.openvz.org/debian-systs; the actual OpenVZ Tools for Debian exist only as unstable builds, see http://packages.debian.org/vzctl
Yellowpin.svg Note: By default, on Ubuntu systems root tasks are executed with sudo

This can be done via the following commands, as root or as privileged "sudo" user

# echo -e "\ndeb http://download.openvz.org/debian-systs etch openvz" >> /etc/apt/sources.list
# wget -q http://download.openvz.org/debian-systs/dso_archiv_signing_key.asc -O- | apt-key add - && apt-get update

2. Using Debian repositories (upgrade to lenny)[edit]

There is even a lenny repository with kernel 2.6.28. Use it at your own risk!

Add lenny repositories to your /etc/apt/sources.list

deb http://DEBIAN-MIRROR/debian/ testing main
deb http://DEBIAN-MIRROR/debian-security/ testing/updates main

Enlarge apt-cache adding to /etc/apt/apt.conf this line:

APT::Cache-Limit "100000000";

Give etch package priority over lenny packages. Edit /etc/apt/preferences and set like this:

Package: *
Pin: release a=etch
Pin-Priority: 700

Package: *
Pin: release a=lenny
Pin-Priority: 650

Then apt-get update && apt-get dist-upgrade to upgrade to lenny.

Kernel installation[edit]

Wheezy and Lenny[edit]

Yellowpin.svg Note: The best kernel to use is RHEL6-based. Please see Install_kernel_from_RPM_on_Debian_6.0

Etch[edit]

1. Using openvz kernel repositories[edit]

Yellowpin.svg Note: In case you want to recompile the OpenVZ kernel yourself on Debian, see Compiling the OpenVZ kernel (the Debian way).

First, you need to choose what kernel you want to install.

OpenVZ Kernel list built with kernel config from http://download.openvz.org
Kernel Description Hardware Debian Architecture
ovzkernel-2.6.18 uniprocessor up to 4GB of RAM i386 and amd64
ovzkernel-2.6.18-smp symmetric multiprocessor up to 4 GB of RAM i386 and amd64
ovzkernel-2.6.18-enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM i386 only
OpenVZ Kernel list built with official Debian kernel config and OpenVZ Settings
Kernel Description Hardware Debian Architecture
fzakernel-2.6.18-686 uni- and multiprocessor up to 4GB of RAM i386
fzakernel-2.6.18-686-bigmem symmetric multiprocessor up to 64 GB of RAM i386
fzakernel-2.6.18-amd64 uni- and multiprocessor amd64
 # apt-get install <kernel>
Configuring the bootloader[edit]

In case GRUB is used as the boot loader, it will be configured automatically, or execute update-grub; lines similar to these will be added to the /boot/grub/menu.lst file:

[...]
  title           Debian GNU/Linux, kernel 2.6.18-ovz-028stab051.1-686
  root            (hd0,1)
  kernel          /vmlinuz-2.6.18-ovz-028stab051.1-686 root=/dev/sda5 ro vga=791
  initrd          /initrd.img-2.6.18-ovz-028stab051.1-686
  savedefault
[...]
Yellowpin.svg Note: per default on debian/ubuntu, a 2.6.22 kernel will boot before a 2.6.18, please check manually the grub boot order. See man update-grub for more details
Installing the user-level tools[edit]

OpenVZ needs some user-level tools installed. Those are:

vzctl
A utility to control OpenVZ containers (create, destroy, start, stop, set parameters etc.)
vzquota
A utility to manage quotas for containers. Mostly used indirectly (by vzctl).
 # [sudo] apt-get install vzctl vzquota

2 Using Debian lenny repositories[edit]

If you upgrade to lenny, you can search openvz kernel and can install with:

apt-get install linux-image-openvz-686

this command will install latest kernel and all required packages like:

apt-get install iproute libatm1 linux-image-2.6.26-1-openvz-686 linux-image-openvz-686 rsync vzctl vzquota libcgroup-dev

and will arrange grub bootloader properly.

Rebooting into OpenVZ kernel[edit]

Warning.svg Warning: Before you restart your Server, verify that your system has all needed modules enabled in order to boot your harddisk (e.g. hardware modules, raid system(s), lvm2 etc). You may need an INITRD (initramdisk) or to compile needed kernel modules statically.

Now reboot the machine and choose the OpenVZ Linux Kernel on the boot loader menu. If the OpenVZ kernel has been booted successfully, proceed to installing the user-level tools for OpenVZ.

Confirm proper installation[edit]

1. Kernel:

 # uname -r
 2.6.26-1-openvz-686
 #

2. Openvz kernel facility:

 # ps ax | grep vz
 2349 ?        S      0:00 [vzmond]

3. A network interface for containers:

 # ifconfig
 venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
           UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0 
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Configuring[edit]

sysctl[edit]

There are a number of kernel parameters that should be set for OpenVZ to work correctly. These parameters are stored in /etc/sysctl.conf file. Here is the relevant part of the file; please edit it accordingly.

Yellowpin.svg Note: vzctl version from debian-systs, automatically inserts these options at the last of /etc/sysctl.conf, except for net.ipv4.ip_forward
[...]

# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled

net.ipv4.conf.default.forwarding=1
net.ipv4.conf.default.proxy_arp=0
net.ipv4.ip_forward=1

# Enables source route verification
net.ipv4.conf.all.rp_filter=1

# Enables the magic-sysrq key
kernel.sysrq=1

# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn=0

# we do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects=1
net.ipv4.conf.all.send_redirects=0

[...]
 # [sudo] sysctl -p
Yellowpin.svg Note: You can make a symlink from /var/lib/vz to /vz as backward

compatibility to OpenVZ as installed in other distributions (Debian vz root directory is /var/lib/vz to be FHS-compliant.

 # [sudo] ln -s /var/lib/vz /vz

OS templates[edit]

Yellowpin.svg Note: Support of OS templates on 64 bit hosts is somewhat limited for the time being, so that not all tools or features are available - please see Making template tools to work on x86_64 and Install OpenVZ on a x86 64 system Centos-Fedora for additional details and information on possible workarounds

To install a container, you need OS template(s).

Precreated templates can be found here and here.

You can create your own templates, see Debian template creation, Ubuntu Gutsy template creation and Category: Templates.

Yellowpin.svg Note: Setup your prefered standard OS Template : edit the /etc/vz/vz.conf
 # [sudo] apt-get install vzctl-ostmpl-debian-5.0-i386-minimal

Additional User Tools[edit]

vzprocps
A set of utilities to provide system information (vzps and vztop)
vzdump
A utility to backup and restore container.
 # [sudo] apt-get install vzprocps vzdump


On Debian squeeze, vzdump seems packaged in standard aptline. For lenny, See Backup_of_a_running_container_with_vzdump


Secure it[edit]

If you want to secure your container with individual firewall rules (instead or additionally to securing the host node) then you must run iptables inside the container. This works slightly different than on a physical server. So make sure that you check that iptables rules are indeed applied as expected inside the container.

Iptables modules required by the container must be specified in the general vz.conf file or the vzXXX.conf file of the container.

Add the following line into vz.conf to activate the respective iptables modules for all containers.

IPTABLES="ip_tables ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl
ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc ipt_LOG ipt_conntrack ipt_helper ipt_state iptable_nat ip_nat_ftp ip_nat_irc ipt_TOS"

[[1][Configure]] your iptable rules inside the container.

Warning.svg Warning: Note that iptables rules inside the container are not applied automatically as on a physical server by starting the iptables module! Follow the instructions below

To make sure the iptables rules are applied on a startup/reboot we'll create a new file:

nano /etc/network/if-pre-up.d/iptables

Add these lines to it:

#!/bin/bash
/sbin/iptables-restore < /etc/iptables.up.rules

The file needs to be executable so change the permissions:

chmod +x /etc/network/if-pre-up.d/iptables

Start iptables

/etc/init.d/iptables start

If the startup shows errors then you have probably not activated the needed iptables modules. See above.

Check inside the container that your iptables rules are indeed applied:

iptables -L

If the rules do not show up as you would expect on a physical server then you might not have activated the needed iptables modules.

Start it![edit]

# [sudo] /etc/init.d/vz start

This does not make the vz system automatically start at boot time. For automatic start:

# [sudo] update-rc.d vz defaults 98

Use it![edit]

After installing the OpenVZ kernel, user tools and a minimal OS template to create a first container and do some basic operations in OpenVZ environment. Read the download:doc/OpenVZ-Users-Guide.pdf, browse this wiki.