Editing NX inside VE

You can run full graphical remote desktop inside container using [http://en.wikipedia.org/wiki/NX_technology NX technology]. This is handy for when you work from home and you wish to run a web browser on your work's internal network to access local resources. You can use NX client to connect to remote NX server.

[http://www.x2go.org/ x2go] is a related project that uses a fork of the NX3 GPL'ed libraries and works fairly well and doesn't have the limitations that the free (gratis) version of NX from NoMachine has.  x2goserver and x2goclient packages are available as stock packages in several distros including Fedora 19 and 20, as well as being available for RHEL6/clones via the EPEL repository.  If you can't find x2go packages in your distro's stock repository, check the x2go website for packages.  x2go is actually easier to setup.  Just install the desired GUI desktop inside of your container, install x2goserver, enable the x2gocleansessions service, make sure sshd is enabled... and connect as a user account over ssh via the x2goclient from the desired remote machine making sure to select the appropriate settings in the client.


= Fedora =

[[File:NX server on Fedora 12.png|thumb|300px|Connecting remotely with NX Client to Fedora inside OpenVZ container.]]

* Use fedora template to create new container and install desktop of your choice:

GNOME:

<pre>yum groupinstall "GNOME Desktop Environment"</pre>

KDE:

<pre>yum groupinstall "KDE (K Desktop Environment)"</pre>

XFce:

<pre>yum groupinstall "XFCE"</pre>


* You may need to install additional package audiofile:
<pre>yum install audiofile</pre>


* Download installation RPM packages for server from site [http://www.nomachine.com/select-package.php?os=linux&id=1 www.nomachine.com]. Choose right architecture i386 or x86_64.

Example: 
<pre>wget http://64.34.161.181/download/3.4.0/Linux/nxclient-3.4.0-5.i386.rpm
wget http://64.34.161.181/download/3.4.0/Linux/nxnode-3.4.0-6.i386.rpm
wget http://64.34.161.181/download/3.4.0/Linux/FE/nxserver-3.4.0-8.i386.rpm</pre>


* Do simple manual installation of RPM packages.

Example:
<pre>
rpm -ivh nxclient-3.4.0-5.i386.rpm
rpm -ivh nxnode-3.4.0-6.i386.rpm
rpm -ivh nxserver-3.4.0-8.i386.rpm</pre>


* Done. You can now connect from NX client to your server.


= Ubuntu =

== Installation ==

Create a new container using the gutsy template. Edit /etc/apt/sources.list and enable the "multiverse" repository.
Install X and XDM
<pre>apt-get install xorg xdm</pre>
Then add this 3rd party repo to sources.list.  (Warning: the datakeylive.com repository below is obsolete!  No ubuntu repository offers freenx at the moment)

<tt>deb <s>http://www.datakeylive.com/ubuntu</s> gutsy main<br>
deb-src <s>http://www.datakeylive.com/ubuntu</s> gutsy main<br>
</tt>
Install the repo keys and update:<br>
<tt>
wget <s>http://www.datakeylive.com/ubuntu/dists/gutsy/wjeremy.key</s> -O - | apt-key add -<br>
wget <s>http://www.datakeylive.com/ubuntu/dists/gutsy/alivesoftware.key</s> -O - | apt-key add -<br>
sudo apt-get update
</tt>
Install FreeNX (*)
<pre>
apt-get install expect openssh-server tcl8.4 libxcomp2 libxcompext2 libxcompshad nxlibs nxagent nxproxy nxclient freenx openssl
</pre>
Finally install XFCE
<pre>
apt-get install xfce4
</pre>

== Configuration ==

=== Configuring X ===
In /etc/X11/xdm/xdm-config, comment out the line where it says '''DisplayManager.requestPort: 0'''

In /etc/X11/xdm/Xservers, comment out the line ''':0 local /usr/bin/X :0 vt7''' (this starts a local X server, which will fail)

In /etc/X11/xdm/Xaccess, uncomment the line with '''* #any host can get a login window''' (Please keep in mind the security implications by the above line. Read the comments found in the file and set it appropriately)

=== Configure NX Server ===

Edit /etc/X11/xorg.conf. Ensure that the files section looks similar to this:

<pre>
Section "Files"

        # path to defoma fonts
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
EndSection
</pre>

Now create a local user account:
<pre>useradd -m <username></pre>

Now add this user to nxserver:
<pre>nxserver --adduser <username></pre>

=== Configure NX client ===

Setup the Host/Port. 
In the desktop section select Unix and Custom. In Settings, select "Run the default X client script on server" and select "New virtual Desktop".

Now try to connect. You should get the XFCE desktop.

Thanks to dantalizing for the feedback.

== Troubleshooting ==

(*)
If you get any errors like:
<pre>
dpkg: error processing /var/cache/apt/archives/libxcomp3_3.1.0-6-2_i386.deb (--unpack):
trying to overwrite `/usr/lib/libXcomp.so.3.1.0', which is also in package libxcomp2
</pre>
while installing the libxcomp package, just force-install the libxcomp package:
<pre>
# cd /var/cache/apt/archives
# dpkg --force-all -i libxcomp3_3.1.0-6-2_i386.deb
# apt-get -f install
</pre>

You '''can't print from VE''' to client PC easily because printing in NX is realized via samba-mount of shared client's printer and CIFS isn't virtualized yet.

[[Category: HOWTO]]
[[Category: X]]
@@ Line 68: / Line 68: @@
 <pre>
 apt-get install expect openssh-server tcl8.4 libxcomp2 libxcompext2 libxcompshad nxlibs nxagent nxproxy nxclient freenx openssl
-</pre>
-For Ubuntu 8.04 :
-<pre>
-apt-get install expect openssh-server tcl8.4 libxcomp3 libxcompext3 libxcompshad nxlibs nxagent nxproxy nxclient freenx-server openssl
 </pre>
 Finally install XFCE