Editing SNMPD in container

If you are trying to get snmpd working on a VE (for whatever reason, note you should strongly consider if you can accomplish what you are trying to do on the host) you will need to do a couple things.

Do this if you are seeing an error like this one:

 error scanning interface data (expected 10, got 0)

First you need to run net-snmp 5.4.1 or later and second you will need to start it with the following option:

<code>-I -ipAddressTable</code>

So

<code>/sbin/snmpd -I -ipAddressTable</code>

The same basic idea applies to net-snmp 5.3.1 (at least in RHEL/Centos 5) with a slightly different flag:

<code>-I -ifTable</code>

From what I understand they are in the process of patching things on net-snmp to work with OpenVZ a little better, but because of the duplicate IPs on the containers (127.0.0.1) things aren't exactly standard.

[[Category: Troubleshooting]]
[[Category: Networking]]
Latest revision		Your text
Line 1:		Line 1:
−	If you are trying to get snmpd working on a ~~container~~ (for whatever reason, note you should strongly consider if you can accomplish what you are trying to do on the host) you will need to do a couple things.	+	If you are trying to get snmpd working on a VE (for whatever reason, note you should strongly consider if you can accomplish what you are trying to do on the host) you will need to do a couple things.

	Do this if you are seeing an error like this one:		Do this if you are seeing an error like this one: