|
For newbies to openvz it is fairly difficult to understand the meaning of the numbers in /proc/user_beancounters file. Calculating the values to something understandable for human brain everytime you look at these statistics is much work. I have written a perl script which reformats the output to human-readable values in kbyte and mbyte.
Just be sure you have Perl installed on your HN/VE, copy this script to somewhere on your machine, give it executable rights and start it. The output will be like this:
BEANS FOR UID 254 resource held maxheld barrier limit failcnt kmemsize 15.14 mb 18.72 mb 150.30 mb 167.00 mb 0 lockedpages 0 0 16.00 mb 16.00 mb 0 privvmpages 433.79 mb 544.63 mb 2929.69 mb 3222.66 mb 0 shmpages 11.58 mb 11.64 mb 512.00 mb 512.00 mb 0 numproc 84 101 500 500 0 physpages 278.24 mb 395.75 mb 0 unlimited 0 vmguarpages 0 0 244.14 mb unlimited 0 oomguarpages 279.66 mb 396.98 mb 122.07 mb unlimited 0 numtcpsock 25 53 500 500 0 numflock 18 22 200 220 0 numpty 4 4 64 64 0 numsiginfo 0 11 512 512 0 tcpsndbuf 569.75 kb 679.25 kb 5.12 mb 10.00 mb 0 tcprcvbuf 400.00 kb 1.28 mb 5.12 mb 10.00 mb 0 othersockbuf 213.00 kb 284.25 kb 1.43 mb 3.88 mb 0 dgramrcvbuf 0.00 kb 8.25 kb 256.00 kb 256.00 kb 0 numothersock 155 175 500 500 0 dcachesize 619.68 kb 656.68 kb 4.00 mb 4.12 mb 0 numfile 2008 2397 9312 9312 0 numiptent 10 10 128 128 0
The script is the following, just copy and paste:
#!/usr/bin/perl
###############################################################################
# vzstats.pl
#
# this script reads /proc/user_beancounters on openvz HNs and VEs and displays
# the values in human-readable format (megabytes/kilobytes).
#
# The script can be distributed freely for everybody who finds it usable.
#
# Christian Anton <mail |_at_| christiananton.de> 2008-09-18
open(BEANS,"/proc/user_beancounters");
chomp ($arch = `uname -m`);
sub check_maxulong {
my $number = shift;
if ($arch eq "x86_64") {
if ($number == 9223372036854775807) {
return 1;
} else {
return undef;
}
} else {
if ($number == 2147483647) {
return 1;
} else {
return undef;
}
}
}
sub recalc_bytes {
my $bytes = shift;
if (defined(&check_maxulong($bytes))) { return "unlimited"; }
my $kbytes = $bytes / 1024;
my $ret;
# if over 1mb, show mb values
if ($kbytes > 1024) {
my $mbytes = $kbytes / 1024;
$ret = sprintf("%.2f", $mbytes) . " mb";
return $ret;
} else {
$ret = sprintf("%.2f", $kbytes) . " kb";
return $ret;
}
}
sub recalc_pages {
my $pages = shift;
if ($pages == 0) { return "0"; }
if (defined(&check_maxulong($pages))) { return "unlimited"; }
my $kbytes = $pages * 4;
my $ret;
if ($kbytes > 1024) {
my $mbytes = $kbytes / 1024;
$ret = sprintf("%.2f", $mbytes) . " mb";
return $ret;
} else {
$ret = sprintf("%.2f", $kbytes) . " kb";
return $ret;
}
}
sub recalc_nothing {
my $number = shift;
if (defined(&check_maxulong($number))) { return "unlimited"; }
return $number;
}
sub printline {
my $mode = shift; # 0=normal, 1=bytes, 2=pages
my $ident = shift;
my $held = shift;
my $maxheld = shift;
my $barrier = shift;
my $limit = shift;
my $failcnt = shift;
if ($mode == 0) {
printf ("%-15s",$ident);
printf ("%18s",&recalc_nothing($held));
printf ("%21s",&recalc_nothing($maxheld));
printf ("%21s",&recalc_nothing($barrier));
printf ("%21s",&recalc_nothing($limit));
printf ("%21s",$failcnt);
print "\n";
} elsif ($mode == 1) {
printf ("%-15s",$ident);
printf ("%18s",&recalc_bytes($held));
printf ("%21s",&recalc_bytes($maxheld));
printf ("%21s",&recalc_bytes($barrier));
printf ("%21s",&recalc_bytes($limit));
printf ("%21s",$failcnt);
print "\n";
} elsif ($mode == 2) {
printf ("%-15s",$ident);
printf ("%18s",&recalc_pages($held));
printf ("%21s",&recalc_pages($maxheld));
printf ("%21s",&recalc_pages($barrier));
printf ("%21s",&recalc_pages($limit));
printf ("%21s",$failcnt);
print "\n";
}
}
sub work_line {
my $line = shift;
my $ident = $line;
my $held = $line;
my $maxheld = $line;
my $barrier = $line;
my $limit = $line;
my $failcnt = $line;
$ident =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$1/;
$held =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$2/;
$maxheld =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$3/;
$barrier =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$4/;
$limit =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$5/;
$failcnt =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$6/;
# 0=normal, 1=bytes, 2=pages
if ($ident eq "dummy") {
# do nothing, skip this line
} elsif ($ident =~ /pages/) {
&printline(2,$ident,$held,$maxheld,$barrier,$limit,$failcnt);
} elsif ($ident =~ /^num/) {
&printline(0,$ident,$held,$maxheld,$barrier,$limit,$failcnt);
} else {
&printline(1,$ident,$held,$maxheld,$barrier,$limit,$failcnt);
}
}
sub print_header {
my $uid = shift;
print "#####################################################################################################################\n";
print "BEANS FOR UID $uid\n";
print "resource held maxheld barrier limit failcnt\n";
}
# now eat your beans baby
while (<BEANS>) {
chomp($line = $_);
# skip processing of headline
if ($line =~ /^\s+uid/) {
# do nothing, skip this
} elsif ($line =~ /^Ver/) {
# do nothing, skip this
} elsif ($line =~ /^\s+\d+:\s+kmem/) {
$uid = $line;
$line =~ s/^(\s+)(\d+):/$1/;
$uid =~ s/^(\s+)(\d+):.*$/$2/;
&print_header($uid);
&work_line($line);
} else {
&work_line($line);
}
}
close(BEANS);Here's a quick patch which adds on VE hostname lookups. It depends on vzlist being in the path but won't break if it isn't.
*** beanCounters.pl-orig Sun Nov 9 14:08:56 2008
--- beanCounters.pl Sun Nov 9 14:08:21 2008
***************
*** 9,14 ****
--- 9,17 ----
# The script can be distributed freely for everybody who finds it usable.
#
# Christian Anton <mail |_at_| christiananton.de> 2008-09-18
+ #
+ # David Osborn <ossdev -at- daoCon.com> 2008-11-09
+ # Added VE name to output
***************
*** 147,158 ****
sub print_header {
my $uid = shift;
print "#####################################################################################################################\n";
! print "BEANS FOR UID $uid\n";
print "resource held maxheld barrier limit failcnt\n";
}
# now eat your beans baby
while (<BEANS>) {
chomp($line = $_);
--- 150,193 ----
sub print_header {
my $uid = shift;
+ my $hostname = shift;
print "#####################################################################################################################\n";
! print "BEANS FOR UID $uid ($hostname)\n";
print "resource held maxheld barrier limit failcnt\n";
}
+ sub get_hostname {
+ my $uid = shift;
+ my @vzout;
+
+ # already retrieved list
+ if (defined %hostnames) {
+ if (defined $hostnames{$uid}) {
+ return $hostnames{$uid};
+ } else {
+ return 'not found';
+ }
+ # try to retrieve the list
+ } elsif ( eval(@vzout = `vzlist -H -o veid,hostname`) ) {
+ $hostnames{0} = 'HN';
+ while (@vzout) {
+ my $line = shift @vzout;
+ my ($tuid,$hostname) = $line =~ /^\s+(\d+)\s+(\S+)/;
+ $hostnames{$tuid} = $hostname;
+ }
+ return $hostnames{$uid};
+ } else {
+ # something's wrong
+ return 'unknown';
+ }
+
+ }
+
+
+ # Hash used to store uid to hostname lookups
+ my %hostnames;
+
# now eat your beans baby
while (<BEANS>) {
chomp($line = $_);
***************
*** 166,172 ****
$uid = $line;
$line =~ s/^(\s+)(\d+):/$1/;
$uid =~ s/^(\s+)(\d+):.*$/$2/;
! &print_header($uid);
&work_line($line);
} else {
&work_line($line);
--- 201,207 ----
$uid = $line;
$line =~ s/^(\s+)(\d+):/$1/;
$uid =~ s/^(\s+)(\d+):.*$/$2/;
! &print_header($uid, get_hostname($uid));
&work_line($line);
} else {
&work_line($line);Quick (and dirty) patch to only display the information of one container (first argument of the script). Usage:
$ beancounters.pl VEID
--- beancounters.pl 2011-05-06 01:06:58.000000000 -0300
+++ beancounters-container.pl 2011-05-06 12:43:09.000000000 -0300
@@ -11,8 +11,7 @@
# Christian Anton <mail |_at_| christiananton.de> 2008-09-18
-
-open(BEANS,"/proc/user_beancounters");
+open(BEANS,"cat /proc/user_beancounters | grep \" ${ARGV[0]}:\" -A 23 |");
chomp ($arch = `uname -m`);
sub check_maxulong {
Here is another modified version vzcomits.pl with some caculation addons and consistency checks.
Also every possible value will be stored stored in hashes which makes it easy to add some more calculations.
Additional Output:
Total RAM: 4154634240 Total SWAP: 8589926400 lowmem current utilization: 2.61% lowmem maximum utilization: 6.88% lowmem barrier: 54.80% lowmem commitment: 105.00% lowmem limit: 1584.87mb oomguarpages utilization can be between 32.60% and 66.30% oomguarpages current utilization: 14.84% oomguarpages commitment (80-100%): 36.12% privvmpages of a single container should not be higher than: 2377.30mb allocated memory (privvmpages) current utilization: 25.39% allocation (privvmpages) limit: 126.77% allocation memory guarantee (vmguarpages <100%): 39.43% ########################################################################
#!/usr/bin/perl
##############################################################################
# vzcomits.pl
#
# this script reads /proc/user_beancounters on openvz HNs and VEs and displays
# the values in human-readable format (megabytes/kilobytes).
#
# The script can be distributed freely for everybody who finds it usable.
#
# Christian Anton <mail |_at_| christiananton.de> 2008-09-18
#
# modified by PVCE Andreas Neuhold <nean[at]hd-recording[dot]at> for additional advanced calculations
#
my %beancounters;
my %sumbeancounters;
my %calc;
my $ram=$1 if (qx(free -b) =~ /.*Mem:\s*(\d+)\s*/);
my $swap=$1 if (qx(free -b) =~ /.*Swap:\s*(\d+)\s*/);
open(BEANS,"/proc/user_beancounters");
chomp ($arch = `uname -m`);
sub check_maxulong {
my $number = shift;
if ($arch eq "x86_64") {
if ($number == 9223372036854775807) {
return 1;
} else {
return undef;
}
} else {
if ($number == 2147483647) {
return 1;
} else {
return undef;
}
}
}
sub recalc_bytes {
my $bytes = shift;
if (defined(&check_maxulong($bytes))) { return "unlimited"; }
my $kbytes = $bytes / 1024;
my $ret;
# if over 1mb, show mb values
if ($kbytes > 1024) {
my $mbytes = $kbytes / 1024;
$ret = sprintf("%.2f", $mbytes) . " mb";
return $ret;
} else {
$ret = sprintf("%.2f", $kbytes) . " kb";
return $ret;
}
}
sub recalc_pages {
my $pages = shift;
if ($pages == 0) { return "0"; }
if (defined(&check_maxulong($pages))) { return "unlimited"; }
my $kbytes = $pages * 4;
my $ret;
if ($kbytes > 1024) {
my $mbytes = $kbytes / 1024;
$ret = sprintf("%.2f", $mbytes) . " mb";
return $ret;
} else {
$ret = sprintf("%.2f", $kbytes) . " kb";
return $ret;
}
}
sub recalc_nothing {
my $number = shift;
if (defined(&check_maxulong($number))) { return "unlimited"; }
return $number;
}
sub printline {
my $mode = shift; # 0=normal, 1=bytes, 2=pages
my $ident = shift;
my $held = shift;
my $maxheld = shift;
my $barrier = shift;
my $limit = shift;
my $failcnt = shift;
if ($mode == 0) {
printf ("%-15s",$ident);
printf ("%18s",&recalc_nothing($held));
printf ("%21s",&recalc_nothing($maxheld));
printf ("%21s",&recalc_nothing($barrier));
printf ("%21s",&recalc_nothing($limit));
printf ("%21s",$failcnt);
print "\n";
} elsif ($mode == 1) {
printf ("%-15s",$ident);
printf ("%18s",&recalc_bytes($held));
printf ("%21s",&recalc_bytes($maxheld));
printf ("%21s",&recalc_bytes($barrier));
printf ("%21s",&recalc_bytes($limit));
printf ("%21s",$failcnt);
print "\n";
} elsif ($mode == 2) {
printf ("%-15s",$ident);
printf ("%18s",&recalc_pages($held));
printf ("%21s",&recalc_pages($maxheld));
printf ("%21s",&recalc_pages($barrier));
printf ("%21s",&recalc_pages($limit));
printf ("%21s",$failcnt);
print "\n";
}
}
sub work_line {
my $cid = shift;
my $line = shift;
my $ident = $line;
my $held = $line;
my $maxheld = $line;
my $barrier = $line;
my $limit = $line;
my $failcnt = $line;
$ident =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$1/;
$held =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$2/;
$maxheld =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$3/;
$barrier =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$4/;
$limit =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$5/;
$failcnt =~ s/^\s+(\w+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)$/$6/;
# save everything in hashes
$beancounters{$cid}{$ident}{"held"}=$held;
$beancounters{$cid}{$ident}{"maxheld"}=$maxheld;
$beancounters{$cid}{$ident}{"bar"}=$barrier;
$beancounters{$cid}{$ident}{"lim"}=$limit;
$beancounters{$cid}{$ident}{"failcnt"}=$failcnt;
# 0=normal, 1=bytes, 2=pages
if ($ident eq "dummy") {
# do nothing, skip this line
} elsif ($ident =~ /pages/) {
&printline(2,$ident,$held,$maxheld,$barrier,$limit,$failcnt);
} elsif ($ident =~ /^num/) {
&printline(0,$ident,$held,$maxheld,$barrier,$limit,$failcnt);
} else {
&printline(1,$ident,$held,$maxheld,$barrier,$limit,$failcnt);
}
}
sub print_header {
my $cid = shift;
print "\n########################################################################\n";
print "CID $cid\n";
print "resource held maxheld barrier limit failcnt\n";
}
# now eat your beans baby
while (<BEANS>) {
chomp($line = $_);
# skip processing of headline
if ($line =~ /^\s+uid/) {
# do nothing, skip this
} elsif ($line =~ /^Ver/) {
# do nothing, skip this
} elsif ($line =~ /^\s+\d+:\s+kmem/) {
$cid = $line;
$line =~ s/^(\s+)(\d+):/$1/;
$cid =~ s/^(\s+)(\d+):.*$/$2/;
&print_header($cid);
&work_line($cid,$line);
} else {
&work_line($cid,$line);
}
}
close(BEANS);
print "########################################################################\n\n";
print "Total RAM: $ram \nTotal SWAP: $swap\n\n";
# summarize all values of all containers
foreach my $cid (keys %beancounters) {
if ($cid > 0 ) {
#print "\n$cid :\n";
foreach my $ident (keys %{$beancounters{$cid}}) {
foreach my $stat (keys %{$beancounters{$cid}{$ident}}) {
# summarize all values of all containers
$sumbeancounters{$ident}{$stat} += $beancounters{$cid}{$ident}{$stat};
# summarize all socket buffers
$sumbeancounters{"buf"}{$stat} += $beancounters{$cid}{$ident}{$stat} if ($ident =~ /.*buf/i);
}
}
# checks
print "WARNING! CID $cid: numiptent should not be greater than 200-300!\n vzvtl set --numiptent 200:200\n" if ($beancounters{$cid}{"numiptent"}{"lim"} > 200);
print "WARNING! CID $cid: numsiginfo hould not be greater than 1024!\n vzvtl set --numsiginfo 1024:1024\n" if ($beancounters{$cid}{"numsiginfo"}{"lim"} > 1024);
print "WARNING! CID $cid: kmemsize barrier to small or numproc to high!\n $beancounters{$cid}{'kmemsize'}{'bar'} > (40960*$beancounters{$cid}{'numproc'}{'held'}+$beancounters{$cid}{'dcachesize'}{'lim'})\n" if ($beancounters{$cid}{"kmemsize"}{"bar"} < (40960*$beancounters{$cid}{"numproc"}{"held"}+$beancounters{$cid}{"dcachesize"}{"lim"}));
print "WARNING! CID $cid: tcpsndbuf to small or numtcpsock to high!\n($beancounters{$cid}{'tcpsndbuf'}{'lim'}-$beancounters{$cid}{'tcpsndbuf'}{'bar'}) > (2560*$beancounters{$cid}{'numtcpsock'}{'maxheld'})\n" if (($beancounters{$cid}{"tcpsndbuf"}{"lim"}-$beancounters{$cid}{"tcpsndbuf"}{"bar"}) < (2560*$beancounters{$cid}{"numtcpsock"}{"maxheld"}));
print "WARNING! CID $cid: othersockbuf to small or numothersock to high!\n ($beancounters{$cid}{'othersockbuf'}{'lim'}-$beancounters{$cid}{'othersockbuf'}{'bar'}) > (2560*$beancounters{$cid}{'numothersock'}{'maxheld'})\n" if (($beancounters{$cid}{"othersockbuf"}{"lim"}-$beancounters{$cid}{"othersockbuf"}{"bar"}) < (2560*$beancounters{$cid}{"numothersock"}{"maxheld"}));
}
}
#print "########################################################################\n\n";
$calc{"lowmem"}{"util"}=(($sumbeancounters{"kmemsize"}{"held"}+$sumbeancounters{"buf"}{"held"})/($ram*0.4))*100;
$calc{"lowmem"}{"maxutil"}=(($sumbeancounters{"kmemsize"}{"maxheld"}+$sumbeancounters{"buf"}{"maxheld"})/($ram*0.4))*100;
$calc{"lowmem"}{"bar"}=(($sumbeancounters{"kmemsize"}{"bar"}+$sumbeancounters{"buf"}{"bar"})/($ram*0.4))*100;
$calc{"lowmem"}{"comit"}=(($sumbeancounters{"kmemsize"}{"lim"}+$sumbeancounters{"buf"}{"lim"})/($ram*0.4))*100;
$calc{"lowmem"}{"limit"}=(($ram*0.4)/(1024*1024));
printf("lowmem current utilization: %.2f%\n", $calc{"lowmem"}{"util"});
printf("lowmem maximum utilization: %.2f%\n", $calc{"lowmem"}{"maxutil"});
printf("lowmem barrier: %.2f%\n", $calc{"lowmem"}{"bar"});
printf("lowmem commitment: %.2f%\n", $calc{"lowmem"}{"comit"});
printf("lowmem limit: %.2fmb\n", $calc{'lowmem'}{'limit'});
$calc{"oomguarpages"}{"min"}=(($ram/($ram+$swap))*100);
$calc{"oomguarpages"}{"max"}=((($ram+($swap*0.5))/($ram+$swap))*100);
$calc{"oomguarpages"}{"util"}=((($sumbeancounters{"oomguarpages"}{"held"}*4096)+$sumbeancounters{"buf"}{"held"})/($ram+$swap))*100;
$calc{"oomguarpages"}{"comit"}=((($sumbeancounters{"oomguarpages"}{"bar"}*4096)+$sumbeancounters{"buf"}{"lim"})/($ram+$swap))*100;
printf "\noomguarpages utilization can be between %.2f% and %.2f%\n", $calc{'oomguarpages'}{'min'}, $calc{'oomguarpages'}{'max'};
printf("oomguarpages current utilization: %.2f%\n", $calc{"oomguarpages"}{"util"});
printf("oomguarpages commitment (80-100%): %.2f%\n", $calc{"oomguarpages"}{"comit"});
$calc{"privvmpages"}{"min"}=(($ram/($ram+$swap))*100);
$calc{"privvmpages"}{"max"}=($ram*0.6)/(1024*1024);
$calc{"privvmpages"}{"util"}=((($sumbeancounters{"privvmpages"}{"held"}*4096)+$sumbeancounters{"buf"}{"held"})/($ram+$swap))*100;
$calc{"vmguarpages"}{"comit"}=((($sumbeancounters{"vmguarpages"}{"bar"}*4096)+$sumbeancounters{"buf"}{"lim"})/($ram+$swap))*100;
$calc{"privvmpages"}{"lim"}=((($sumbeancounters{"privvmpages"}{"lim"}*4096)+$sumbeancounters{"buf"}{"lim"})/($ram+$swap))*100;
printf("\nprivvmpages of a single container should not be higher than: %.2fmb\n", $calc{'privvmpages'}{'max'});
printf("allocated memory (privvmpages) current utilization: %.2f%\n", $calc{"privvmpages"}{"util"});
printf("allocation (privvmpages) limit: %.2f%\n", $calc{"privvmpages"}{"lim"});
printf("allocation memory guarantee (vmguarpages <100%): %.2f%\n", $calc{"vmguarpages"}{"comit"});
# numiptent 200-300
print "\n########################################################################\n\n";
#EOF